linux-stable.git/include/linux, branch v5.4.75

hil/parisc: Disable HIL driver when it gets stuck

2020-11-05T10:43:36+00:00

commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream.

When starting a HP machine with HIL driver but without an HIL keyboard
or HIL mouse attached, it may happen that data written to the HIL loop
gets stuck (e.g. because the transaction queue is full).  Usually one
will then have to reboot the machine because all you see is and endless
output of:
 Transaction add failed: transaction already queued?

In the higher layers hp_sdc_enqueue_transaction() is called to queued up
a HIL packet. This function returns an error code, and this patch adds
the necessary checks for this return code and disables the HIL driver if
further packets can't be sent.

Tested on a HP 730 and a HP 715/64 machine.

Signed-off-by: Helge Deller 
Cc: 
Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: During PR_SWAP, source caps should be sent only after tSwapSourceStart

2020-11-05T10:43:15+00:00

[ Upstream commit 6bbe2a90a0bb4af8dd99c3565e907fe9b5e7fd88 ]

The patch addresses the compliance test failures while running
TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 of the "Deterministic PD
Compliance MOI" test plan published in https://www.usb.org/usbc.
For a product to be Type-C compliant, it's expected that these tests
are run on usb.org certified Type-C compliance tester as mentioned in
https://www.usb.org/usbc.

The purpose of the tests TD.PD.CP.E3, TD.PD.CP.E4, TD.PD.CP.E5 is to
verify the PR_SWAP response of the device. While doing so, the test
asserts that Source Capabilities message is NOT received from the test
device within tSwapSourceStart min (20 ms) from the time the last bit
of GoodCRC corresponding to the RS_RDY message sent by the UUT was
sent. If it does then the test fails.

This is in line with the requirements from the USB Power Delivery
Specification Revision 3.0, Version 1.2:
"6.6.8.1 SwapSourceStartTimer
The SwapSourceStartTimer Shall be used by the new Source, after a
Power Role Swap or Fast Role Swap, to ensure that it does not send
Source_Capabilities Message before the new Sink is ready to receive
the
Source_Capabilities Message. The new Source Shall Not send the
Source_Capabilities Message earlier than tSwapSourceStart after the
last bit of the EOP of GoodCRC Message sent in response to the PS_RDY
Message sent by the new Source indicating that its power supply is
ready."

The patch makes sure that TCPM does not send the Source_Capabilities
Message within tSwapSourceStart(20ms) by transitioning into
SRC_STARTUP only after  tSwapSourceStart(20ms).

Signed-off-by: Badhri Jagan Sridharan 
Reviewed-by: Guenter Roeck 
Reviewed-by: Heikki Krogerus 
Link: https://lore.kernel.org/r/20200817183828.1895015-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

PM: runtime: Fix timer_expires data type on 32-bit arches

2020-11-01T11:01:06+00:00

commit 6b61d49a55796dbbc479eeb4465e59fd656c719c upstream.

Commit 8234f6734c5d ("PM-runtime: Switch autosuspend over to using
hrtimers") switched PM runtime autosuspend to use hrtimers and all
related time accounting in ns, but missed to update the timer_expires
data type in struct dev_pm_info to u64.

This causes the timer_expires value to be truncated on 32-bit
architectures when assignment is done from u64 values:

rpm_suspend()
|- dev->power.timer_expires = expires;

Fix it by changing the timer_expires type to u64.

Fixes: 8234f6734c5d ("PM-runtime: Switch autosuspend over to using hrtimers")
Signed-off-by: Grygorii Strashko 
Acked-by: Pavel Machek 
Acked-by: Vincent Guittot 
Cc: 5.0+  # 5.0+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

serial: qcom_geni_serial: To correct QUP Version detection logic

2020-11-01T11:01:06+00:00

commit c9ca43d42ed8d5fd635d327a664ed1d8579eb2af upstream.

For QUP IP versions 2.5 and above the oversampling rate is
halved from 32 to 16.

Commit ce734600545f ("tty: serial: qcom_geni_serial: Update
the oversampling rate") is pushed to handle this scenario.
But the existing logic is failing to classify QUP Version 3.0
into the correct group ( 2.5 and above).

As result Serial Engine clocks are not configured properly for
baud rate and garbage data is sampled to FIFOs from the line.

So, fix the logic to detect QUP with versions 2.5 and above.

Fixes: ce734600545f ("tty: serial: qcom_geni_serial: Update the oversampling rate")
Cc: stable 
Signed-off-by: Paras Sharma 
Reviewed-by: Akash Asthana 
Link: https://lore.kernel.org/r/1601445926-23673-1-git-send-email-parashar@codeaurora.org
Signed-off-by: Greg Kroah-Hartman

mtd: lpddr: Fix bad logic in print_drs_error

2020-11-01T11:01:05+00:00

commit 1c9c02bb22684f6949d2e7ddc0a3ff364fd5a6fc upstream.

Update logic for broken test. Use a more common logging style.

It appears the logic in this function is broken for the
consecutive tests of

        if (prog_status & 0x3)
                ...
        else if (prog_status & 0x2)
                ...
        else (prog_status & 0x1)
                ...

Likely the first test should be

        if ((prog_status & 0x3) == 0x3)

Found by inspection of include files using printk.

Fixes: eb3db27507f7 ("[MTD] LPDDR PFOW definition")
Cc: stable@vger.kernel.org
Reported-by: Joe Perches 
Signed-off-by: Gustavo A. R. Silva 
Acked-by: Miquel Raynal 
Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/linux-mtd/3fb0e29f5b601db8be2938a01d974b00c8788501.1588016644.git.gustavo@embeddedor.com
Signed-off-by: Greg Kroah-Hartman

dmaengine: dw: Add DMA-channels mask cell support

2020-10-29T08:58:09+00:00

[ Upstream commit e8ee6c8cb61b676f1a2d6b942329e98224bd8ee9 ]

DW DMA IP-core provides a way to synthesize the DMA controller with
channels having different parameters like maximum burst-length,
multi-block support, maximum data width, etc. Those parameters both
explicitly and implicitly affect the channels performance. Since DMA slave
devices might be very demanding to the DMA performance, let's provide a
functionality for the slaves to be assigned with DW DMA channels, which
performance according to the platform engineer fulfill their requirements.
After this patch is applied it can be done by passing the mask of suitable
DMA-channels either directly in the dw_dma_slave structure instance or as
a fifth cell of the DMA DT-property. If mask is zero or not provided, then
there is no limitation on the channels allocation.

For instance Baikal-T1 SoC is equipped with a DW DMAC engine, which first
two channels are synthesized with max burst length of 16, while the rest
of the channels have been created with max-burst-len=4. It would seem that
the first two channels must be faster than the others and should be more
preferable for the time-critical DMA slave devices. In practice it turned
out that the situation is quite the opposite. The channels with
max-burst-len=4 demonstrated a better performance than the channels with
max-burst-len=16 even when they both had been initialized with the same
settings. The performance drop of the first two DMA-channels made them
unsuitable for the DW APB SSI slave device. No matter what settings they
are configured with, full-duplex SPI transfers occasionally experience the
Rx FIFO overflow. It means that the DMA-engine doesn't keep up with
incoming data pace even though the SPI-bus is enabled with speed of 25MHz
while the DW DMA controller is clocked with 50MHz signal. There is no such
problem has been noticed for the channels synthesized with
max-burst-len=4.

Signed-off-by: Serge Semin 
Link: https://lore.kernel.org/r/20200731200826.9292-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul 
Signed-off-by: Sasha Levin

bpf: Limit caller's stack depth 256 for subprogs with tailcalls

2020-10-29T08:58:06+00:00

[ Upstream commit 7f6e4312e15a5c370e84eaa685879b6bdcc717e4 ]

Protect against potential stack overflow that might happen when bpf2bpf
calls get combined with tailcalls. Limit the caller's stack depth for
such case down to 256 so that the worst case scenario would result in 8k
stack size (32 which is tailcall limit * 256 = 8k).

Suggested-by: Alexei Starovoitov 
Signed-off-by: Maciej Fijalkowski 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

PCI/IOV: Mark VFs as not implementing PCI_COMMAND_MEMORY

2020-10-29T08:57:54+00:00

[ Upstream commit 12856e7acde4702b7c3238c15fcba86ff6aa507f ]

For VFs, the Memory Space Enable bit in the Command Register is
hard-wired to 0.

Add a new bit to signify devices where the Command Register Memory
Space Enable bit does not control the device's response to MMIO
accesses.

Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory")
Signed-off-by: Matthew Rosato 
Acked-by: Bjorn Helgaas 
Signed-off-by: Alex Williamson 
Signed-off-by: Sasha Levin

mm/page_owner: change split_page_owner to take a count

2020-10-29T08:57:52+00:00

[ Upstream commit 8fb156c9ee2db94f7127c930c89917634a1a9f56 ]

The implementation of split_page_owner() prefers a count rather than the
old order of the page.  When we support a variable size THP, we won't
have the order at this point, but we will have the number of pages.
So change the interface to what the caller and callee would prefer.

Signed-off-by: Matthew Wilcox (Oracle) 
Signed-off-by: Andrew Morton 
Reviewed-by: SeongJae Park 
Acked-by: Kirill A. Shutemov 
Cc: Huang Ying 
Link: https://lkml.kernel.org/r/20200908195539.25896-4-willy@infradead.org
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

overflow: Include header file with SIZE_MAX declaration

2020-10-29T08:57:51+00:00

[ Upstream commit a4947e84f23474803b62a2759b5808147e4e15f9 ]

The various array_size functions use SIZE_MAX define, but missed limits.h
causes to failure to compile code that needs overflow.h.

 In file included from drivers/infiniband/core/uverbs_std_types_device.c:6:
 ./include/linux/overflow.h: In function 'array_size':
 ./include/linux/overflow.h:258:10: error: 'SIZE_MAX' undeclared (first use in this function)
   258 |   return SIZE_MAX;
       |          ^~~~~~~~

Fixes: 610b15c50e86 ("overflow.h: Add allocation size calculation helpers")
Link: https://lore.kernel.org/r/20200913102928.134985-1-leon@kernel.org
Signed-off-by: Leon Romanovsky 
Signed-off-by: Jason Gunthorpe 
Signed-off-by: Sasha Levin