linux-stable.git/include/linux, branch v5.4.52

bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()

2020-07-16T06:16:45+00:00

commit 63960260457a02af2a6cb35d75e6bdb17299c882 upstream.

When evaluating access control over kallsyms visibility, credentials at
open() time need to be used, not the "current" creds (though in BPF's
case, this has likely always been the same). Plumb access to associated
file->f_cred down through bpf_dump_raw_ok() and its callers now that
kallsysm_show_value() has been refactored to take struct cred.

Cc: Alexei Starovoitov 
Cc: Daniel Borkmann 
Cc: bpf@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump")
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

kallsyms: Refactor kallsyms_show_value() to take cred

2020-07-16T06:16:44+00:00

commit 160251842cd35a75edfb0a1d76afa3eb674ff40a upstream.

In order to perform future tests against the cred saved during open(),
switch kallsyms_show_value() to operate on a cred, and have all current
callers pass current_cred(). This makes it very obvious where callers
are checking the wrong credential in their "read" contexts. These will
be fixed in the coming patches.

Additionally switch return value to bool, since it is always used as a
direct permission check, not a 0-on-success, negative-on-error style
function return.

Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

net: qed: fix left elements count calculation

2020-06-30T19:36:58+00:00

[ Upstream commit 97dd1abd026ae4e6a82fa68645928404ad483409 ]

qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.

Misc: replace open-coded constants with common defines.

Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin 
Signed-off-by: Igor Russkikh 
Signed-off-by: Michal Kalderon 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

efi/tpm: Verify event log header before parsing

2020-06-30T19:36:54+00:00

[ Upstream commit 7dfc06a0f25b593a9f51992f540c0f80a57f3629 ]

It is possible that the first event in the event log is not actually a
log header at all, but rather a normal event. This leads to the cast in
__calc_tpm2_event_size being an invalid conversion, which means that
the values read are effectively garbage. Depending on the first event's
contents, this leads either to apparently normal behaviour, a crash or
a freeze.

While this behaviour of the firmware is not in accordance with the
TCG Client EFI Specification, this happens on a Dell Precision 5510
with the TPM enabled but hidden from the OS ("TPM On" disabled, state
otherwise untouched). The EFI firmware claims that the TPM is present
and active and that it supports the TCG 2.0 event log format.

Fortunately, this can be worked around by simply checking the header
of the first event and the event log header signature itself.

Commit b4f1874c6216 ("tpm: check event log version before reading final
events") addressed a similar issue also found on Dell models.

Fixes: 6b0326190205 ("efi: Attempt to get the TCG2 event log in the boot stub")
Signed-off-by: Fabian Vogt 
Link: https://lore.kernel.org/r/1927248.evlx2EsYKh@linux-e202.suse.de
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1165773
Signed-off-by: Ard Biesheuvel 
Signed-off-by: Sasha Levin

net: core: reduce recursion limit value

2020-06-30T19:36:44+00:00

[ Upstream commit fb7861d14c8d7edac65b2fcb6e8031cb138457b2 ]

In the current code, ->ndo_start_xmit() can be executed recursively only
10 times because of stack memory.
But, in the case of the vxlan, 10 recursion limit value results in
a stack overflow.
In the current code, the nested interface is limited by 8 depth.
There is no critical reason that the recursion limitation value should
be 10.
So, it would be good to be the same value with the limitation value of
nesting interface depth.

Test commands:
    ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789
    ip link set vxlan10 up
    ip a a 192.168.10.1/24 dev vxlan10
    ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent

    for i in {9..0}
    do
        let A=$i+1
	ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789
	ip link set vxlan$i up
	ip a a 192.168.$i.1/24 dev vxlan$i
	ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent
	bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self
    done
    hping3 192.168.10.2 -2 -d 60000

Splat looks like:
[  103.814237][ T1127] =============================================================================
[  103.871955][ T1127] BUG kmalloc-2k (Tainted: G    B            ): Padding overwritten. 0x00000000897a2e4f-0x000
[  103.873187][ T1127] -----------------------------------------------------------------------------
[  103.873187][ T1127]
[  103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020
[  103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G    B             5.7.0+ #575
[  103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[  103.883006][ T1127] Call Trace:
[  103.883324][ T1127]  dump_stack+0x96/0xdb
[  103.883716][ T1127]  slab_err+0xad/0xd0
[  103.884106][ T1127]  ? _raw_spin_unlock+0x1f/0x30
[  103.884620][ T1127]  ? get_partial_node.isra.78+0x140/0x360
[  103.885214][ T1127]  slab_pad_check.part.53+0xf7/0x160
[  103.885769][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.886316][ T1127]  check_slab+0x97/0xb0
[  103.886763][ T1127]  alloc_debug_processing+0x84/0x1a0
[  103.887308][ T1127]  ___slab_alloc+0x5a5/0x630
[  103.887765][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.888265][ T1127]  ? lock_downgrade+0x730/0x730
[  103.888762][ T1127]  ? pskb_expand_head+0x110/0xe10
[  103.889244][ T1127]  ? __slab_alloc+0x3e/0x80
[  103.889675][ T1127]  __slab_alloc+0x3e/0x80
[  103.890108][ T1127]  __kmalloc_node_track_caller+0xc7/0x420
[ ... ]

Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.")
Signed-off-by: Taehee Yoo 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

kretprobe: Prevent triggering kretprobe from within kprobe_flush_task

2020-06-24T15:50:52+00:00

commit 9b38cc704e844e41d9cf74e647bff1d249512cb3 upstream.

Ziqian reported lockup when adding retprobe on _raw_spin_lock_irqsave.
My test was also able to trigger lockdep output:

 ============================================
 WARNING: possible recursive locking detected
 5.6.0-rc6+ #6 Not tainted
 --------------------------------------------
 sched-messaging/2767 is trying to acquire lock:
 ffffffff9a492798 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_hash_lock+0x52/0xa0

 but task is already holding lock:
 ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&(kretprobe_table_locks[i].lock));
   lock(&(kretprobe_table_locks[i].lock));

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by sched-messaging/2767:
  #0: ffffffff9a491a18 (&(kretprobe_table_locks[i].lock)){-.-.}, at: kretprobe_trampoline+0x0/0x50

 stack backtrace:
 CPU: 3 PID: 2767 Comm: sched-messaging Not tainted 5.6.0-rc6+ #6
 Call Trace:
  dump_stack+0x96/0xe0
  __lock_acquire.cold.57+0x173/0x2b7
  ? native_queued_spin_lock_slowpath+0x42b/0x9e0
  ? lockdep_hardirqs_on+0x590/0x590
  ? __lock_acquire+0xf63/0x4030
  lock_acquire+0x15a/0x3d0
  ? kretprobe_hash_lock+0x52/0xa0
  _raw_spin_lock_irqsave+0x36/0x70
  ? kretprobe_hash_lock+0x52/0xa0
  kretprobe_hash_lock+0x52/0xa0
  trampoline_handler+0xf8/0x940
  ? kprobe_fault_handler+0x380/0x380
  ? find_held_lock+0x3a/0x1c0
  kretprobe_trampoline+0x25/0x50
  ? lock_acquired+0x392/0xbc0
  ? _raw_spin_lock_irqsave+0x50/0x70
  ? __get_valid_kprobe+0x1f0/0x1f0
  ? _raw_spin_unlock_irqrestore+0x3b/0x40
  ? finish_task_switch+0x4b9/0x6d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70

The code within the kretprobe handler checks for probe reentrancy,
so we won't trigger any _raw_spin_lock_irqsave probe in there.

The problem is in outside kprobe_flush_task, where we call:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave

where _raw_spin_lock_irqsave triggers the kretprobe and installs
kretprobe_trampoline handler on _raw_spin_lock_irqsave return.

The kretprobe_trampoline handler is then executed with already
locked kretprobe_table_locks, and first thing it does is to
lock kretprobe_table_locks ;-) the whole lockup path like:

  kprobe_flush_task
    kretprobe_table_lock
      raw_spin_lock_irqsave
        _raw_spin_lock_irqsave ---> probe triggered, kretprobe_trampoline installed

        ---> kretprobe_table_locks locked

        kretprobe_trampoline
          trampoline_handler
            kretprobe_hash_lock(current, &head, &flags);  <--- deadlock

Adding kprobe_busy_begin/end helpers that mark code with fake
probe installed to prevent triggering of another kprobe within
this code.

Using these helpers in kprobe_flush_task, so the probe recursion
protection check is hit and the probe is never set to prevent
above lockup.

Link: http://lkml.kernel.org/r/158927059835.27680.7011202830041561604.stgit@devnote2

Fixes: ef53d9c5e4da ("kprobes: improve kretprobe scalability with hashed locking")
Cc: Ingo Molnar 
Cc: "Gustavo A . R . Silva" 
Cc: Anders Roxell 
Cc: "Naveen N . Rao" 
Cc: Anil S Keshavamurthy 
Cc: David Miller 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: stable@vger.kernel.org
Reported-by: "Ziqian SUN (Zamir)" 
Acked-by: Masami Hiramatsu 
Signed-off-by: Jiri Olsa 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

block: nr_sects_write(): Disable preemption on seqcount write

2020-06-24T15:50:49+00:00

[ Upstream commit 15b81ce5abdc4b502aa31dff2d415b79d2349d2f ]

For optimized block readers not holding a mutex, the "number of sectors"
64-bit value is protected from tearing on 32-bit architectures by a
sequence counter.

Disable preemption before entering that sequence counter's write side
critical section. Otherwise, the read side can preempt the write side
section and spin for the entire scheduler tick. If the reader belongs to
a real-time scheduling class, it can spin forever and the kernel will
livelock.

Fixes: c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl")
Cc: 
Signed-off-by: Ahmed S. Darwish 
Reviewed-by: Sebastian Andrzej Siewior 
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()

2020-06-24T15:50:48+00:00

[ Upstream commit 7f6225e446cc8dfa4c3c7959a4de3dd03ec277bf ]

__jbd2_journal_abort_hard() is no longer used, so now we can merge
__jbd2_journal_abort_hard() and __journal_abort_soft() these two
functions into jbd2_journal_abort() and remove them.

Signed-off-by: zhangyi (F) 
Reviewed-by: Jan Kara 
Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o 
Signed-off-by: Sasha Levin

libata: Use per port sync for detach

2020-06-24T15:50:47+00:00

[ Upstream commit b5292111de9bb70cba3489075970889765302136 ]

Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before
detach") may cause system freeze during suspend.

Using async_synchronize_full() in PM callbacks is wrong, since async
callbacks that are already scheduled may wait for not-yet-scheduled
callbacks, causes a circular dependency.

Instead of using big hammer like async_synchronize_full(), use async
cookie to make sure port probe are synced, without affecting other
scheduled PM callbacks.

Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach")
Suggested-by: John Garry 
Signed-off-by: Kai-Heng Feng 
Tested-by: John Garry 
BugLink: https://bugs.launchpad.net/bugs/1867983
Signed-off-by: Jens Axboe 
Signed-off-by: Sasha Levin

usb: host: ehci-platform: add a quirk to avoid stuck

2020-06-24T15:50:44+00:00

[ Upstream commit cc7eac1e4afdd151085be4d0341a155760388653 ]

Since EHCI/OHCI controllers on R-Car Gen3 SoCs are possible to
be getting stuck very rarely after a full/low usb device was
disconnected. To detect/recover from such a situation, the controllers
require a special way which poll the EHCI PORTSC register and changes
the OHCI functional state.

So, this patch adds a polling timer into the ehci-platform driver,
and if the ehci driver detects the issue by the EHCI PORTSC register,
the ehci driver removes a companion device (= the OHCI controller)
to change the OHCI functional state to USB Reset once. And then,
the ehci driver adds the companion device again.

Signed-off-by: Yoshihiro Shimoda 
Acked-by: Alan Stern 
Link: https://lore.kernel.org/r/1580114262-25029-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin