linux-stable.git/include/linux, branch v5.4.142

PCI/MSI: Protect msi_desc::masked for multi-MSI

2021-08-18T06:57:03+00:00

commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream.

Multi-MSI uses a single MSI descriptor and there is a single mask register
when the device supports per vector masking. To avoid reading back the mask
register the value is cached in the MSI descriptor and updates are done by
clearing and setting bits in the cache and writing it to the device.

But nothing protects msi_desc::masked and the mask register from being
modified concurrently on two different CPUs for two different Linux
interrupts which belong to the same multi-MSI descriptor.

Add a lock to struct device and protect any operation on the mask and the
mask register with it.

This makes the update of msi_desc::masked unconditional, but there is no
place which requires a modification of the hardware register without
updating the masked cache.

msi_mask_irq() is now an empty wrapper which will be cleaned up in follow
up changes.

The problem goes way back to the initial support of multi-MSI, but picking
the commit which introduced the mask cache is a valid cut off point
(2.6.30).

Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Thomas Gleixner 
Tested-by: Marc Zyngier 
Reviewed-by: Marc Zyngier 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de
Signed-off-by: Greg Kroah-Hartman

genirq: Provide IRQCHIP_AFFINITY_PRE_STARTUP

2021-08-18T06:57:02+00:00

commit 826da771291fc25a428e871f9e7fb465e390f852 upstream.

X86 IO/APIC and MSI interrupts (when used without interrupts remapping)
require that the affinity setup on startup is done before the interrupt is
enabled for the first time as the non-remapped operation mode cannot safely
migrate enabled interrupts from arbitrary contexts. Provide a new irq chip
flag which allows affected hardware to request this.

This has to be opt-in because there have been reports in the past that some
interrupt chips cannot handle affinity setting before startup.

Fixes: 18404756765c ("genirq: Expose default irq affinity mask (take 3)")
Signed-off-by: Thomas Gleixner 
Tested-by: Marc Zyngier 
Reviewed-by: Marc Zyngier 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210729222542.779791738@linutronix.de
Signed-off-by: Greg Kroah-Hartman

net: igmp: increase size of mr_ifc_count

2021-08-18T06:57:01+00:00

[ Upstream commit b69dd5b3780a7298bd893816a09da751bc0636f7 ]

Some arches support cmpxchg() on 4-byte and 8-byte only.
Increase mr_ifc_count width to 32bit to fix this problem.

Fixes: 4a2b285e7e10 ("net: igmp: fix data-race in igmp_ifc_timer_expire()")
Signed-off-by: Eric Dumazet 
Reported-by: Guenter Roeck 
Link: https://lore.kernel.org/r/20210811195715.3684218-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag

2021-08-15T11:08:02+00:00

[ Upstream commit 376e4199e327a5cf29b8ec8fb0f64f3d8b429819 ]

Currently TEE_SHM_DMA_BUF flag has been inappropriately used to not
register shared memory allocated for private usage by underlying TEE
driver: OP-TEE in this case. So rather add a new flag as TEE_SHM_PRIV
that can be utilized by underlying TEE drivers for private allocation
and usage of shared memory.

With this corrected, allow tee_shm_alloc_kernel_buf() to allocate a
shared memory region without the backing of dma-buf.

Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg 
Co-developed-by: Tyler Hicks 
Signed-off-by: Tyler Hicks 
Reviewed-by: Jens Wiklander 
Reviewed-by: Sumit Garg 
Signed-off-by: Jens Wiklander 
Signed-off-by: Sasha Levin

tee: add tee_shm_alloc_kernel_buf()

2021-08-12T11:21:01+00:00

commit dc7019b7d0e188d4093b34bd0747ed0d668c63bf upstream.

Adds a new function tee_shm_alloc_kernel_buf() to allocate shared memory
from a kernel driver. This function can later be made more lightweight
by unnecessary dma-buf export.

Cc: stable@vger.kernel.org
Reviewed-by: Tyler Hicks 
Reviewed-by: Sumit Garg 
Signed-off-by: Jens Wiklander 
Signed-off-by: Greg Kroah-Hartman

usb: otg-fsm: Fix hrtimer list corruption

2021-08-12T11:21:00+00:00

commit bf88fef0b6f1488abeca594d377991171c00e52a upstream.

The HNP work can be re-scheduled while it's still in-fly. This results in
re-initialization of the busy work, resetting the hrtimer's list node of
the work and crashing kernel with null dereference within kernel/timer
once work's timer is expired. It's very easy to trigger this problem by
re-plugging USB cable quickly. Initialize HNP work only once to fix this
trouble.

 Unable to handle kernel NULL pointer dereference at virtual address 00000126)
 ...
 PC is at __run_timers.part.0+0x150/0x228
 LR is at __next_timer_interrupt+0x51/0x9c
 ...
 (__run_timers.part.0) from [] (run_timer_softirq+0x2f/0x50)
 (run_timer_softirq) from [] (__do_softirq+0xd5/0x2f0)
 (__do_softirq) from [] (irq_exit+0xab/0xb8)
 (irq_exit) from [] (handle_domain_irq+0x45/0x60)
 (handle_domain_irq) from [] (gic_handle_irq+0x6b/0x7c)
 (gic_handle_irq) from [] (__irq_svc+0x65/0xac)

Cc: stable@vger.kernel.org
Acked-by: Peter Chen 
Signed-off-by: Dmitry Osipenko 
Link: https://lore.kernel.org/r/20210717182134.30262-6-digetx@gmail.com
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

regulator: rt5033: Fix n_voltages settings for BUCK and LDO

2021-08-08T07:04:07+00:00

[ Upstream commit 6549c46af8551b346bcc0b9043f93848319acd5c ]

For linear regulators, the n_voltages should be (max - min) / step + 1.

Buck voltage from 1v to 3V, per step 100mV, and vout mask is 0x1f.
If value is from 20 to 31, the voltage will all be fixed to 3V.
And LDO also, just vout range is different from 1.2v to 3v, step is the
same. If value is from 18 to 31, the voltage will also be fixed to 3v.

Signed-off-by: Axel Lin 
Reviewed-by: ChiYuan Huang 
Link: https://lore.kernel.org/r/20210627080418.1718127-1-axel.lin@ingics.com
Signed-off-by: Mark Brown 
Signed-off-by: Sasha Levin

cgroup1: fix leaked context root causing sporadic NULL deref in LTP

2021-07-31T06:19:37+00:00

commit 1e7107c5ef44431bc1ebbd4c353f1d7c22e5f2ec upstream.

Richard reported sporadic (roughly one in 10 or so) null dereferences and
other strange behaviour for a set of automated LTP tests.  Things like:

   BUG: kernel NULL pointer dereference, address: 0000000000000008
   #PF: supervisor read access in kernel mode
   #PF: error_code(0x0000) - not-present page
   PGD 0 P4D 0
   Oops: 0000 [#1] PREEMPT SMP PTI
   CPU: 0 PID: 1516 Comm: umount Not tainted 5.10.0-yocto-standard #1
   Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
   RIP: 0010:kernfs_sop_show_path+0x1b/0x60

...or these others:

   RIP: 0010:do_mkdirat+0x6a/0xf0
   RIP: 0010:d_alloc_parallel+0x98/0x510
   RIP: 0010:do_readlinkat+0x86/0x120

There were other less common instances of some kind of a general scribble
but the common theme was mount and cgroup and a dubious dentry triggering
the NULL dereference.  I was only able to reproduce it under qemu by
replicating Richard's setup as closely as possible - I never did get it
to happen on bare metal, even while keeping everything else the same.

In commit 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
we see this as a part of the overall change:

   --------------
           struct cgroup_subsys *ss;
   -       struct dentry *dentry;

   [...]

   -       dentry = cgroup_do_mount(&cgroup_fs_type, fc->sb_flags, root,
   -                                CGROUP_SUPER_MAGIC, ns);

   [...]

   -       if (percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
   -               struct super_block *sb = dentry->d_sb;
   -               dput(dentry);
   +       ret = cgroup_do_mount(fc, CGROUP_SUPER_MAGIC, ns);
   +       if (!ret && percpu_ref_is_dying(&root->cgrp.self.refcnt)) {
   +               struct super_block *sb = fc->root->d_sb;
   +               dput(fc->root);
                   deactivate_locked_super(sb);
                   msleep(10);
                   return restart_syscall();
           }
   --------------

In changing from the local "*dentry" variable to using fc->root, we now
export/leave that dentry pointer in the file context after doing the dput()
in the unlikely "is_dying" case.   With LTP doing a crazy amount of back to
back mount/unmount [testcases/bin/cgroup_regression_5_1.sh] the unlikely
becomes slightly likely and then bad things happen.

A fix would be to not leave the stale reference in fc->root as follows:

   --------------
                  dput(fc->root);
  +               fc->root = NULL;
                  deactivate_locked_super(sb);
   --------------

...but then we are just open-coding a duplicate of fc_drop_locked() so we
simply use that instead.

Cc: Al Viro 
Cc: Tejun Heo 
Cc: Zefan Li 
Cc: Johannes Weiner 
Cc: stable@vger.kernel.org      # v5.1+
Reported-by: Richard Purdie 
Fixes: 71d883c37e8d ("cgroup_do_mount(): massage calling conventions")
Signed-off-by: Paul Gortmaker 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

x86/signal: Detect and prevent an alternate signal stack overflow

2021-07-20T14:10:49+00:00

[ Upstream commit 2beb4a53fc3f1081cedc1c1a198c7f56cc4fc60c ]

The kernel pushes context on to the userspace stack to prepare for the
user's signal handler. When the user has supplied an alternate signal
stack, via sigaltstack(2), it is easy for the kernel to verify that the
stack size is sufficient for the current hardware context.

Check if writing the hardware context to the alternate stack will exceed
it's size. If yes, then instead of corrupting user-data and proceeding with
the original signal handler, an immediate SIGSEGV signal is delivered.

Refactor the stack pointer check code from on_sig_stack() and use the new
helper.

While the kernel allows new source code to discover and use a sufficient
alternate signal stack size, this check is still necessary to protect
binaries with insufficient alternate signal stack size from data
corruption.

Fixes: c2bc11f10a39 ("x86, AVX-512: Enable AVX-512 States Context Switch")
Reported-by: Florian Weimer 
Suggested-by: Jann Horn 
Suggested-by: Andy Lutomirski 
Signed-off-by: Chang S. Bae 
Signed-off-by: Borislav Petkov 
Reviewed-by: Len Brown 
Acked-by: Thomas Gleixner 
Link: https://lkml.kernel.org/r/20210518200320.17239-6-chang.seok.bae@intel.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153531
Signed-off-by: Sasha Levin

NFS: nfs_find_open_context() may only select open files

2021-07-20T14:10:48+00:00

[ Upstream commit e97bc66377bca097e1f3349ca18ca17f202ff659 ]

If a file has already been closed, then it should not be selected to
support further I/O.

Signed-off-by: Trond Myklebust 
[Trond: Fix an invalid pointer deref reported by Colin Ian King]
Signed-off-by: Sasha Levin