linux-stable.git/include/linux, branch v5.2.14

libceph: allow ceph_buffer_put() to receive a NULL ceph_buffer

2019-09-10T09:35:26+00:00

[ Upstream commit 5c498950f730aa17c5f8a2cdcb903524e4002ed2 ]

Signed-off-by: Luis Henriques 
Reviewed-by: Jeff Layton 
Signed-off-by: Ilya Dryomov 
Signed-off-by: Sasha Levin

gpio: Fix build error of function redefinition

2019-09-10T09:35:15+00:00

[ Upstream commit 68e03b85474a51ec1921b4d13204782594ef7223 ]

when do randbuilding, I got this error:

In file included from drivers/hwmon/pmbus/ucd9000.c:19:0:
./include/linux/gpio/driver.h:576:1: error: redefinition of gpiochip_add_pin_range
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/hwmon/pmbus/ucd9000.c:18:0:
./include/linux/gpio.h:245:1: note: previous definition of gpiochip_add_pin_range was here
 gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 ^~~~~~~~~~~~~~~~~~~~~~

Reported-by: Hulk Robot 
Fixes: 964cb341882f ("gpio: move pincontrol calls to ")
Signed-off-by: YueHaibing 
Link: https://lore.kernel.org/r/20190731123814.46624-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij 
Signed-off-by: Sasha Levin

Add genphy_c45_config_aneg() function to phy-c45.c

2019-09-10T09:35:09+00:00

[ Upstream commit 2ebb991641d3f64b70fec0156e2b6933810177e9 ]

Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling
genphy_config_aneg") introduced a check that aborts phy_config_aneg()
if the phy is a C45 phy.
This causes phy_state_machine() to call phy_error() so that the phy
ends up in PHY_HALTED state.

Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg()
(analogous to the C22 case) so that the state machine can run
correctly.

genphy_c45_config_aneg() closely resembles mv3310_config_aneg()
in drivers/net/phy/marvell10g.c, excluding vendor specific
configurations for 1000BaseT.

Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver")

Signed-off-by: Marco Hartmann 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

lib: logic_pio: Add logic_pio_unregister_range()

2019-09-06T08:23:45+00:00

commit b884e2de2afc68ce30f7093747378ef972dde253 upstream.

Add a function to unregister a logical PIO range.

Logical PIO space can still be leaked when unregistering certain
LOGIC_PIO_CPU_MMIO regions, but this acceptable for now since there are no
callers to unregister LOGIC_PIO_CPU_MMIO regions, and the logical PIO
region allocation scheme would need significant work to improve this.

Cc: stable@vger.kernel.org
Signed-off-by: John Garry 
Signed-off-by: Wei Xu 
Signed-off-by: Greg Kroah-Hartman

Revert "NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated"

2019-09-06T08:23:45+00:00

commit d5711920ec6e578f51db95caa6f185f5090b865e upstream.

This reverts commit a79f194aa4879e9baad118c3f8bb2ca24dbef765.
The mechanism for aborting I/O is racy, since we are not guaranteed that
the request is asleep while we're changing both task->tk_status and
task->tk_action.

Signed-off-by: Trond Myklebust 
Cc: stable@vger.kernel.org # v5.1
Signed-off-by: Greg Kroah-Hartman

net/tls: prevent skb_orphan() from leaking TLS plain text with offload

2019-08-25T14:10:38+00:00

[ Upstream commit 414776621d1006e57e80e6db7fdc3837897aaa64 ]

sk_validate_xmit_skb() and drivers depend on the sk member of
struct sk_buff to identify segments requiring encryption.
Any operation which removes or does not preserve the original TLS
socket such as skb_orphan() or skb_clone() will cause clear text
leaks.

Make the TCP socket underlying an offloaded TLS connection
mark all skbs as decrypted, if TLS TX is in offload mode.
Then in sk_validate_xmit_skb() catch skbs which have no socket
(or a socket with no validation) and decrypted flag set.

Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and
sk->sk_validate_xmit_skb are slightly interchangeable right now,
they all imply TLS offload. The new checks are guarded by
CONFIG_TLS_DEVICE because that's the option guarding the
sk_buff->decrypted member.

Second, smaller issue with orphaning is that it breaks
the guarantee that packets will be delivered to device
queues in-order. All TLS offload drivers depend on that
scheduling property. This means skb_orphan_partial()'s
trick of preserving partial socket references will cause
issues in the drivers. We need a full orphan, and as a
result netem delay/throttling will cause all TLS offload
skbs to be dropped.

Reusing the sk_buff->decrypted flag also protects from
leaking clear text when incoming, decrypted skb is redirected
(e.g. by TC).

See commit 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect
through ULP") for justification why the internal flag is safe.
The only location which could leak the flag in is tcp_bpf_sendmsg(),
which is taken care of by clearing the previously unused bit.

v2:
 - remove superfluous decrypted mark copy (Willem);
 - remove the stale doc entry (Boris);
 - rely entirely on EOR marking to prevent coalescing (Boris);
 - use an internal sendpages flag instead of marking the socket
   (Boris).
v3 (Willem):
 - reorganize the can_skb_orphan_partial() condition;
 - fix the flag leak-in through tcp_bpf_sendmsg.

Signed-off-by: Jakub Kicinski 
Acked-by: Willem de Bruijn 
Reviewed-by: Boris Pismenny 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

page flags: prioritize kasan bits over last-cpuid

2019-08-25T14:10:34+00:00

[ Upstream commit ee38d94a0ad89890b770f6c876263cf9fcbfde84 ]

ARM64 randdconfig builds regularly run into a build error, especially
when NUMA_BALANCING and SPARSEMEM are enabled but not SPARSEMEM_VMEMMAP:

  #error "KASAN: not enough bits in page flags for tag"

The last-cpuid bits are already contitional on the available space, so
the result of the calculation is a bit random on whether they were
already left out or not.

Adding the kasan tag bits before last-cpuid makes it much more likely to
end up with a successful build here, and should be reliable for
randconfig at least, as long as that does not randomize NR_CPUS or
NODES_SHIFT but uses the defaults.

In order for the modified check to not trigger in the x86 vdso32 code
where all constants are wrong (building with -m32), enclose all the
definitions with an #ifdef.

[arnd@arndb.de: build fix]
  Link: http://lkml.kernel.org/r/CAK8P3a3Mno1SWTcuAOT0Wa9VS15pdU6EfnkxLbDpyS55yO04+g@mail.gmail.com
Link: http://lkml.kernel.org/r/20190722115520.3743282-1-arnd@arndb.de
Link: https://lore.kernel.org/lkml/20190618095347.3850490-1-arnd@arndb.de/
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Arnd Bergmann 
Signed-off-by: Arnd Bergmann 
Reviewed-by: Andrey Konovalov 
Reviewed-by: Andrey Ryabinin 
Cc: Andrey Konovalov 
Cc: Dmitry Vyukov 
Cc: Will Deacon 
Cc: Christoph Lameter 
Cc: Mark Rutland 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

KVM: Fix leak vCPU's VMCS value into other pCPU

2019-08-16T08:11:11+00:00

commit 17e433b54393a6269acbcb792da97791fe1592d8 upstream.

After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a
five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs
on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting
in the VMs after stress testing:

 INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073)
 Call Trace:
   flush_tlb_mm_range+0x68/0x140
   tlb_flush_mmu.part.75+0x37/0xe0
   tlb_finish_mmu+0x55/0x60
   zap_page_range+0x142/0x190
   SyS_madvise+0x3cd/0x9c0
   system_call_fastpath+0x1c/0x21

swait_active() sustains to be true before finish_swait() is called in
kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account
by kvm_vcpu_on_spin() loop greatly increases the probability condition
kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv
is enabled the yield-candidate vCPU's VMCS RVI field leaks(by
vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current
VMCS.

This patch fixes it by checking conservatively a subset of events.

Cc: Paolo Bonzini 
Cc: Radim Krčmář 
Cc: Christian Borntraeger 
Cc: Marc Zyngier 
Cc: stable@vger.kernel.org
Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop)
Signed-off-by: Wanpeng Li 
Signed-off-by: Paolo Bonzini 
Signed-off-by: Greg Kroah-Hartman

crypto: ccp - Add support for valid authsize values less than 16

2019-08-16T08:10:51+00:00

commit 9f00baf74e4b6f79a3a3dfab44fb7bb2e797b551 upstream.

AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes.
Validate the requested authsize, and retain it to save in the request
context.

Fixes: 36cf515b9bbe2 ("crypto: ccp - Enable support for AES GCM on v5 CCPs")
Cc: 
Signed-off-by: Gary R Hook 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

compat_ioctl: pppoe: fix PPPOEIOCSFWD handling

2019-08-09T15:51:48+00:00

[ Upstream commit 055d88242a6046a1ceac3167290f054c72571cd9 ]

Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.

Guillaume Nault adds:

  And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe:
  fix reference counting in PPPoE proxy")), and nobody ever noticed. I
  should probably have removed this ioctl entirely instead of fixing it.
  Clearly, it has never been used.

Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.

All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.

This should apply to all stable kernels.

Acked-by: Guillaume Nault 
Signed-off-by: Arnd Bergmann 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman