commit e589f46445960c274cc813a1cc8e2fc73b2a1849 upstream.

Commit e70344c05995 ("block: fix default IO priority handling")
introduced an inconsistency in get_current_ioprio() that tasks without
IO context return IOPRIO_DEFAULT priority while tasks with freshly
allocated IO context will return 0 (IOPRIO_CLASS_NONE/0) IO priority.
Tasks without IO context used to be rare before 5a9d041ba2f6 ("block:
move io_context creation into where it's needed") but after this commit
they became common because now only BFQ IO scheduler setups task's IO
context. Similar inconsistency is there for get_task_ioprio() so this
inconsistency is now exposed to userspace and userspace will see
different IO priority for tasks operating on devices with BFQ compared
to devices without BFQ. Furthemore the changes done by commit
e70344c05995 change the behavior when no IO priority is set for BFQ IO
scheduler which is also documented in ioprio_set(2) manpage:

"If no I/O scheduler has been set for a thread, then by default the I/O
priority will follow the CPU nice value (setpriority(2)).  In Linux
kernels before version 2.6.24, once an I/O priority had been set using
ioprio_set(), there was no way to reset the I/O scheduling behavior to
the default. Since Linux 2.6.24, specifying ioprio as 0 can be used to
reset to the default I/O scheduling behavior."

So make sure we default to IOPRIO_CLASS_NONE as used to be the case
before commit e70344c05995. Also cleanup alloc_io_context() to
explicitely set this IO priority for the allocated IO context to avoid
future surprises. Note that we tweak ioprio_best() to maintain
ioprio_get(2) behavior and make this commit easily backportable.

CC: stable@vger.kernel.org
Fixes: e70344c05995 ("block: fix default IO priority handling")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220623074840.5960-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull LoongArch fixes from Huacai Chen:

 - Fix cache size calculation, stack protection attributes, ptrace's
   fpr_set and "ROM Size" in boardinfo

 - Some cleanups and improvements of assembly

 - Some cleanups of unused code and useless code

* tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix wrong "ROM Size" of boardinfo
  LoongArch: Fix missing fcsr in ptrace's fpr_set
  LoongArch: Fix shared cache size calculation
  LoongArch: Disable executable stack by default
  LoongArch: Remove unused variables
  LoongArch: Remove clock setting during cpu hotplug stage
  LoongArch: Remove useless header compiler.h
  LoongArch: Remove several syntactic sugar macros for branches
  LoongArch: Re-tab the assembly files
  LoongArch: Simplify "BGT foo, zero" with BGTZ
  LoongArch: Simplify "BLT foo, zero" with BLTZ
  LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ
  LoongArch: Use the "move" pseudo-instruction where applicable
  LoongArch: Use the "jr" pseudo-instruction where applicable
  LoongArch: Use ABI names of registers where appropriate

On physical machine we can save power by disabling clock of hot removed
cpu. However as different platforms require different methods to
configure clocks, the code is platform-specific, and probably belongs to
firmware/pmu or cpu regulator, rather than generic arch/loongarch code.

Also, there is no such register on QEMU virt machine since the
clock/frequency regulation is not emulated.

This patch removes the hard-coded clock register accesses in generic
LoongArch cpu hotplug flow.

Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull misc fixes from Andrew Morton:
 "Thirteen hotfixes.

  Eight are cc:stable and the remainder are for post-5.18 issues or are
  too minor to warrant backporting"

* tag 'mm-hotfixes-stable-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: update Gao Xiang's email addresses
  userfaultfd: provide properly masked address for huge-pages
  Revert "ocfs2: mount shared volume without ha stack"
  hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pte
  fs: sendfile handles O_NONBLOCK of out_fd
  ntfs: fix use-after-free in ntfs_ucsncmp()
  secretmem: fix unhandled fault in truncate
  mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range()
  mm: fix missing wake-up event for FSDAX pages
  mm: fix page leak with multiple threads mapping the same page
  mailmap: update Seth Forshee's email address
  tmpfs: fix the issue that the mount and remount results are inconsistent.
  mm: kfence: apply kmemleak_ignore_phys on early allocated pool

Pull networking fixes from Paolo Abeni:
 "Including fixes from can.

  Still no major regressions, most of the changes are still due to data
  races fixes, plus the usual bunch of drivers fixes.

  Previous releases - regressions:

   - tcp/udp: make early_demux back namespacified.

   - dsa: fix issues with vlan_filtering_is_global

  Previous releases - always broken:

   - ip: fix data-races around ipv4_net_table (round 2, 3 & 4)

   - amt: fix validation and synchronization bugs

   - can: fix detection of mcp251863

   - eth: iavf: fix handling of dummy receive descriptors

   - eth: lan966x: fix issues with MAC table

   - eth: stmmac: dwmac-mediatek: fix clock issue

  Misc:

   - dsa: update documentation"

* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
  mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
  net/sched: cls_api: Fix flow action initialization
  tcp: Fix data-races around sysctl_tcp_max_reordering.
  tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
  tcp: Fix a data-race around sysctl_tcp_rfc1337.
  tcp: Fix a data-race around sysctl_tcp_stdurg.
  tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
  tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
  tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
  tcp: Fix data-races around sysctl_tcp_recovery.
  tcp: Fix a data-race around sysctl_tcp_early_retrans.
  tcp: Fix data-races around sysctl knobs related to SYN option.
  udp: Fix a data-race around sysctl_udp_l3mdev_accept.
  ip: Fix data-races around sysctl_ip_prot_sock.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
  ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
  ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
  can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
  can: mcp251xfd: fix detection of mcp251863
  Documentation: fix udp_wmem_min in ip-sysctl.rst
  ...

FSDAX page refcounts are 1-based, rather than 0-based: if refcount is
1, then the page is freed.  The FSDAX pages can be pinned through GUP,
then they will be unpinned via unpin_user_page() using a folio variant
to put the page, however, folio variants did not consider this special
case, the result will be to miss a wakeup event (like the user of
__fuse_dax_break_layouts()).  This results in a task being permanently
stuck in TASK_INTERRUPTIBLE state.

Since FSDAX pages are only possibly obtained by GUP users, so fix GUP
instead of folio_put() to lower overhead.

Link: https://lkml.kernel.org/r/20220705123532.283-1-songmuchun@bytedance.com
Fixes: d8ddc099c6b3 ("mm/gup: Add gup_put_folio()")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Using current implementation of polling mode, there is high chances we
will hit into timeout error when running phc2sys. Hence, update the
implementation of hardware crosstimestamping to use the MAC interrupt
service routine instead of polling for TSIS bit in the MAC Timestamp
Interrupt Status register to be set.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull tty and serial driver fixes from Greg KH:
 "Here are some TTY and Serial driver fixes for 5.19-rc7. They resolve a
  number of reported problems including:

   - longtime bug in pty_write() that has been reported in the past.

   - 8250 driver fixes

   - new serial device ids

   - vt overlapping data copy bugfix

   - other tiny serial driver bugfixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: use new tty_insert_flip_string_and_push_buffer() in pty_write()
  tty: extract tty_flip_buffer_commit() from tty_flip_buffer_push()
  serial: 8250: dw: Fix the macro RZN1_UART_xDMACR_8_WORD_BURST
  vt: fix memory overlapping when deleting chars in the buffer
  serial: mvebu-uart: correctly report configured baudrate value
  serial: 8250: Fix PM usage_count for console handover
  serial: 8250: fix return error code in serial8250_request_std_resource()
  serial: stm32: Clear prev values before setting RTS delays
  tty: Add N_CAN327 line discipline ID for ELM327 based CAN driver
  serial: 8250: Fix __stop_tx() & DMA Tx restart races
  serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle
  tty: serial: samsung_tty: set dma burst_size to 1
  serial: 8250: dw: enable using pdata with ACPI

Pull KVM fixes from Paolo Bonzini:
 "RISC-V:
   - Fix missing PAGE_PFN_MASK

   - Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()

  x86:
   - Fix for nested virtualization when TSC scaling is active

   - Estimate the size of fastcc subroutines conservatively, avoiding
     disastrous underestimation when return thunks are enabled

   - Avoid possible use of uninitialized fields of 'struct
     kvm_lapic_irq'

  Generic:
   - Mark as such the boolean values available from the statistics file
     descriptors

   - Clarify statistics documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: emulate: do not adjust size of fastop and setcc subroutines
  KVM: x86: Fully initialize 'struct kvm_lapic_irq' in kvm_pv_kick_cpu_op()
  Documentation: kvm: clarify histogram units
  kvm: stats: tell userspace which values are boolean
  x86/kvm: fix FASTOP_SIZE when return thunks are enabled
  KVM: nVMX: Always enable TSC scaling for L2 when it was enabled for L1
  RISC-V: KVM: Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()
  riscv: Fix missing PAGE_PFN_MASK

Pull ceph fix from Ilya Dryomov:
 "A folio locking fixup that Xiubo and David cooperated on, marked for
  stable. Most of it is in netfs but I picked it up into ceph tree on
  agreement with David"

* tag 'ceph-for-5.19-rc7' of https://github.com/ceph/ceph-client:
  netfs: do not unlock and put the folio twice