linux-stable.git/include/linux, branch v4.4.271

hugetlbfs: hugetlb_fault_mutex_hash() cleanup

2021-06-03T06:22:09+00:00

commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream.

A new clang diagnostic (-Wsizeof-array-div) warns about the calculation
to determine the number of u32's in an array of unsigned longs.
Suppress warning by adding parentheses.

While looking at the above issue, noticed that the 'address' parameter
to hugetlb_fault_mutex_hash is no longer used.  So, remove it from the
definition and all callers.

No functional change.

Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz 
Reported-by: Nathan Chancellor 
Reviewed-by: Nathan Chancellor 
Reviewed-by: Davidlohr Bueso 
Reviewed-by: Andrew Morton 
Cc: Nick Desaulniers 
Cc: Ilie Halip 
Cc: David Bolvansky 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

spi: Fix use-after-free with devm_spi_alloc_*

2021-06-03T06:22:06+00:00

commit 794aaf01444d4e765e2b067cba01cc69c1c68ed9 upstream.

We can't rely on the contents of the devres list during
spi_unregister_controller(), as the list is already torn down at the
time we perform devres_find() for devm_spi_release_controller. This
causes devices registered with devm_spi_alloc_{master,slave}() to be
mistakenly identified as legacy, non-devm managed devices and have their
reference counters decremented below 0.

------------[ cut here ]------------
WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174
[] (refcount_warn_saturate) from [] (kobject_put+0x90/0x98)
[] (kobject_put) from [] (put_device+0x20/0x24)
 r4:b6700140
[] (put_device) from [] (devm_spi_release_controller+0x3c/0x40)
[] (devm_spi_release_controller) from [] (release_nodes+0x84/0xc4)
 r5:b6700180 r4:b6700100
[] (release_nodes) from [] (devres_release_all+0x5c/0x60)
 r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10
[] (devres_release_all) from [] (__device_release_driver+0x144/0x1ec)
 r5:b117ad94 r4:b163dc10
[] (__device_release_driver) from [] (device_driver_detach+0x84/0xa0)
 r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10
[] (device_driver_detach) from [] (unbind_store+0xe4/0xf8)

Instead, determine the devm allocation state as a flag on the
controller which is guaranteed to be stable during cleanup.

Fixes: 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
Signed-off-by: William A. Kennington III 
Link: https://lore.kernel.org/r/20210407095527.2771582-1-wak@google.com
Signed-off-by: Mark Brown 
[lukas: backport to v4.4.270]
Signed-off-by: Lukas Wunner 
Signed-off-by: Greg Kroah-Hartman

mac80211: check defrag PN against current frame

2021-06-03T06:22:05+00:00

commit bf30ca922a0c0176007e074b0acc77ed345e9990 upstream.

As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.

Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df90bb0e3fd55930bc8a0@changeid
Signed-off-by: Johannes Berg 
Signed-off-by: Greg Kroah-Hartman

netfilter: x_tables: Use correct memory barriers.

2021-06-03T06:22:04+00:00

commit 175e476b8cdf2a4de7432583b49c871345e4f8a1 upstream.

When a new table value was assigned, it was followed by a write memory
barrier. This ensured that all writes before this point would complete
before any writes after this point. However, to determine whether the
rules are unused, the sequence counter is read. To ensure that all
writes have been done before these reads, a full memory barrier is
needed, not just a write memory barrier. The same argument applies when
incrementing the counter, before the rules are read.

Changing to using smp_mb() instead of smp_wmb() fixes the kernel panic
reported in cc00bcaa5899 (which is still present), while still
maintaining the same speed of replacing tables.

The smb_mb() barriers potentially slow the packet path, however testing
has shown no measurable change in performance on a 4-core MIPS64
platform.

Fixes: 7f5c6d4f665b ("netfilter: get rid of atomic ops in fast path")
Signed-off-by: Mark Tomlinson 
Signed-off-by: Pablo Neira Ayuso 
[Ported to stable, affected barrier is added by d3d40f237480abf3268956daf18cdc56edd32834 in mainline]
Signed-off-by: Pavel Machek (CIP) 
Signed-off-by: Nobuhiro Iwamatsu (CIP) 
Signed-off-by: Greg Kroah-Hartman

vt: Fix character height handling with VT_RESIZEX

2021-05-26T09:27:34+00:00

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream.

Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter
which is the number of pixel rows per character (cell) rather than the
height of the font used.

For framebuffer devices the two values are always the same, because the
former is inferred from the latter one.  For VGA used as a true text
mode device these two parameters are independent from each other: the
number of pixel rows per character is set in the CRT controller, while
font height is in fact hardwired to 32 pixel rows and fonts of heights
below that value are handled by padding their data with blanks when
loaded to hardware for use by the character generator.  One can change
the setting in the CRT controller and it will update the screen contents
accordingly regardless of the font loaded.

The `v_clin' parameter is used by the `vgacon' driver to set the height
of the character cell and then the cursor position within.  Make the
parameter explicit then, by defining a new `vc_cell_height' struct
member of `vc_data', set it instead of `vc_font.height' from `v_clin' in
the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver
except where actual font data is accessed which as noted above is
independent from the CRTC setting.

This way the framebuffer console driver is free to ignore the `v_clin'
parameter as irrelevant, as it always should have, avoiding any issues
attempts to give the parameter a meaning there could have caused, such
as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX
behave like VT_RESIZE"):

 "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2],
  for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height
  larger than actual font height calculated by con_font_set() from
  ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates
  minimal amount of memory based on actual font height calculated by
  con_font_set(), use of vt_resizex() can cause UAF/OOB read for font
  data."

The problem first appeared around Linux 2.5.66 which predates our repo
history, but the origin could be identified with the old MIPS/Linux repo
also at: 
as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX
code in `vt_ioctl' was updated as follows:

 		if (clin)
-			video_font_height = clin;
+			vc->vc_font.height = clin;

making the parameter apply to framebuffer devices as well, perhaps due
to the use of "font" in the name of the original `video_font_height'
variable.  Use "cell" in the new struct member then to avoid ambiguity.

References:

[1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837
[2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3

Signed-off-by: Maciej W. Rozycki 
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org # v2.6.12+
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

HID: plantronics: Workaround for double volume key presses

2021-05-22T08:38:24+00:00

[ Upstream commit f567d6ef8606fb427636e824c867229ecb5aefab ]

Plantronics Blackwire 3220 Series (047f:c056) sends HID reports twice
for each volume key press. This patch adds a quirk to hid-plantronics
for this product ID, which will ignore the second volume key press if
it happens within 5 ms from the last one that was handled.

The patch was tested on the mentioned model only, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected, because the
rate is about 3 times per second, which is far less frequent than once
in 5 ms.

Fixes: 81bb773faed7 ("HID: plantronics: Update to map volume up/down controls")
Signed-off-by: Maxim Mikityanskiy 
Signed-off-by: Jiri Kosina 
Signed-off-by: Sasha Levin

tty: fix return value for unsupported ioctls

2021-05-22T08:38:23+00:00

[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ]

Drivers should return -ENOTTY ("Inappropriate I/O control operation")
when an ioctl isn't supported, while -EINVAL is used for invalid
arguments.

Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned
-EINVAL when a tty driver did not implement the corresponding
operations.

Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a
corresponding Fixes tag below.

Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler")
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

overflow.h: Add allocation size calculation helpers

2021-04-28T10:05:47+00:00

commit 610b15c50e86eb1e4b77274fabcaea29ac72d6a8 upstream.

In preparation for replacing unchecked overflows for memory allocations,
this creates helpers for the 3 most common calculations:

array_size(a, b): 2-dimensional array
array3_size(a, b, c): 3-dimensional array
struct_size(ptr, member, n): struct followed by n-many trailing members

Each of these return SIZE_MAX on overflow instead of wrapping around.

(Additionally renames a variable named "array_size" to avoid future
collision.)

Co-developed-by: Matthew Wilcox 
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman

compiler.h: enable builtin overflow checkers and add fallback code

2021-04-28T10:05:47+00:00

commit f0907827a8a9152aedac2833ed1b674a7b2a44f2 upstream.

This adds wrappers for the __builtin overflow checkers present in gcc
5.1+ as well as fallback implementations for earlier compilers. It's not
that easy to implement the fully generic __builtin_X_overflow(T1 a, T2
b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are
the same. We obviously don't want the wrappers to have different
semantics depending on $GCC_VERSION, so we also insist on that even when
using the builtins.

There are a few problems with the 'a+b < a' idiom for checking for
overflow: For signed types, it relies on undefined behaviour and is
not actually complete (it doesn't check underflow;
e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it
is wrong for all types (signed and unsigned) narrower than
int. Similarly, when a and b does not have the same type, there are
subtle cases like

  u32 a;

  if (a + sizeof(foo) < a)
    return -EOVERFLOW;
  a += sizeof(foo);

where the test is always false on 64 bit platforms. Add to that that it
is not always possible to determine the types involved at a glance.

The new overflow.h is somewhat bulky, but that's mostly a result of
trying to be type-generic, complete (e.g. catching not only overflow
but also signed underflow) and not relying on undefined behaviour.

Linus is of course right [1] that for unsigned subtraction a-b, the
right way to check for overflow (underflow) is "b > a" and not
"__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases
covered here, and included mostly for completeness.

So is it worth it? I think it is, if nothing else for the documentation
value of seeing

  if (check_add_overflow(a, b, &d))
    return -EGOAWAY;
  do_stuff_with(d);

instead of the open-coded (and possibly wrong and/or incomplete and/or
UBsan-tickling)

  if (a+b < a)
    return -EGOAWAY;
  do_stuff_with(a+b);

While gcc does recognize the 'a+b < a' idiom for testing unsigned add
overflow, it doesn't do nearly as good for unsigned multiplication
(there's also no single well-established idiom). So using
check_mul_overflow in kcalloc and friends may also make gcc generate
slightly better code.

[1] https://lkml.org/lkml/2015/11/2/658

Signed-off-by: Rasmus Villemoes 
Signed-off-by: Kees Cook 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

macvlan: macvlan_count_rx() needs to be aware of preemption

2021-03-30T12:45:00+00:00

[ Upstream commit dd4fa1dae9f4847cc1fd78ca468ad69e16e5db3e ]

macvlan_count_rx() can be called from process context, it is thus
necessary to disable preemption before calling u64_stats_update_begin()

syzbot was able to spot this on 32bit arch:

WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert include/linux/seqlock.h:271 [inline]
WARNING: CPU: 1 PID: 4632 at include/linux/seqlock.h:271 __seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269
Modules linked in:
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 4632 Comm: kworker/1:3 Not tainted 5.12.0-rc2-syzkaller #0
Hardware name: ARM-Versatile Express
Workqueue: events macvlan_process_broadcast
Backtrace:
[<82740468>] (dump_backtrace) from [<827406dc>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
 r7:00000080 r6:60000093 r5:00000000 r4:8422a3c4
[<827406c4>] (show_stack) from [<82751b58>] (__dump_stack lib/dump_stack.c:79 [inline])
[<827406c4>] (show_stack) from [<82751b58>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<82751aa0>] (dump_stack) from [<82741270>] (panic+0x130/0x378 kernel/panic.c:231)
 r7:830209b4 r6:84069ea4 r5:00000000 r4:844350d0
[<82741140>] (panic) from [<80244924>] (__warn+0xb0/0x164 kernel/panic.c:605)
 r3:8404ec8c r2:00000000 r1:00000000 r0:830209b4
 r7:0000010f
[<80244874>] (__warn) from [<82741520>] (warn_slowpath_fmt+0x68/0xd4 kernel/panic.c:628)
 r7:81363f70 r6:0000010f r5:83018e50 r4:00000000
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert include/linux/seqlock.h:271 [inline])
[<827414bc>] (warn_slowpath_fmt) from [<81363f70>] (__seqprop_assert.constprop.0+0xf0/0x11c include/linux/seqlock.h:269)
 r8:5a109000 r7:0000000f r6:a568dac0 r5:89802300 r4:00000001
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (u64_stats_update_begin include/linux/u64_stats_sync.h:128 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_count_rx include/linux/if_macvlan.h:47 [inline])
[<81363e80>] (__seqprop_assert.constprop.0) from [<81364af0>] (macvlan_broadcast+0x154/0x26c drivers/net/macvlan.c:291)
 r5:89802300 r4:8a927740
[<8136499c>] (macvlan_broadcast) from [<81365020>] (macvlan_process_broadcast+0x258/0x2d0 drivers/net/macvlan.c:317)
 r10:81364f78 r9:8a86d000 r8:8a9c7e7c r7:8413aa5c r6:00000000 r5:00000000
 r4:89802840
[<81364dc8>] (macvlan_process_broadcast) from [<802696a4>] (process_one_work+0x2d4/0x998 kernel/workqueue.c:2275)
 r10:00000008 r9:8404ec98 r8:84367a02 r7:ddfe6400 r6:ddfe2d40 r5:898dac80
 r4:8a86d43c
[<802693d0>] (process_one_work) from [<80269dcc>] (worker_thread+0x64/0x54c kernel/workqueue.c:2421)
 r10:00000008 r9:8a9c6000 r8:84006d00 r7:ddfe2d78 r6:898dac94 r5:ddfe2d40
 r4:898dac80
[<80269d68>] (worker_thread) from [<80271f40>] (kthread+0x184/0x1a4 kernel/kthread.c:292)
 r10:85247e64 r9:898dac80 r8:80269d68 r7:00000000 r6:8a9c6000 r5:89a2ee40
 r4:8a97bd00
[<80271dbc>] (kthread) from [<80200114>] (ret_from_fork+0x14/0x20 arch/arm/kernel/entry-common.S:158)
Exception stack(0x8a9c7fb0 to 0x8a9c7ff8)

Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue")
Signed-off-by: Eric Dumazet 
Cc: Herbert Xu 
Reported-by: syzbot 
Acked-by: Herbert Xu 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin