linux-stable.git/include/linux, branch v4.4.147

ring_buffer: tracing: Inherit the tracing setting to next ring buffer

2018-08-09T10:19:28+00:00

commit 73c8d8945505acdcbae137c2e00a1232e0be709f upstream.

Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.

Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:

  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 0 > tracing_on
  /sys/kernel/debug/tracing # cat tracing_on
  0
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  1
  /sys/kernel/debug/tracing # echo 1 > snapshot
  /sys/kernel/debug/tracing # cat tracing_on
  0

We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.

Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox

Cc: Ingo Molnar 
Cc: Shuah Khan 
Cc: Tom Zanussi 
Cc: Hiraku Toyooka 
Cc: stable@vger.kernel.org
Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu 
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

brcmfmac: Add support for bcm43364 wireless chipset

2018-08-06T14:24:36+00:00

[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ]

Add support for the BCM43364 chipset via an SDIO interface, as used in
e.g. the Murata 1FX module.

The BCM43364 uses the same firmware as the BCM43430 (which is already
included), the only difference is the omission of Bluetooth.

However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS
of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't
load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place
triggers the brcmfmac driver to load, and then correctly use the
firmware file 'brcmfmac43430-sdio.bin'.

Signed-off-by: Sean Lanigan 
Acked-by: Ulf Hansson 
Signed-off-by: Kalle Valo 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

dma-iommu: Fix compilation when !CONFIG_IOMMU_DMA

2018-08-06T14:24:36+00:00

[ Upstream commit 8a22a3e1e768c309b718f99bd86f9f25a453e0dc ]

Inclusion of include/dma-iommu.h when CONFIG_IOMMU_DMA is not selected
results in the following splat:

In file included from drivers/irqchip/irq-gic-v3-mbi.c:20:0:
./include/linux/dma-iommu.h:95:69: error: unknown type name ‘dma_addr_t’
 static inline int iommu_get_msi_cookie(struct iommu_domain *domain, dma_addr_t base)
                                                                     ^~~~~~~~~~
./include/linux/dma-iommu.h:108:74: warning: ‘struct list_head’ declared inside parameter list will not be visible outside of this definition or declaration
 static inline void iommu_dma_get_resv_regions(struct device *dev, struct list_head *list)
                                                                          ^~~~~~~~~
scripts/Makefile.build:312: recipe for target 'drivers/irqchip/irq-gic-v3-mbi.o' failed

Fix it by including linux/types.h.

Signed-off-by: Marc Zyngier 
Signed-off-by: Thomas Gleixner 
Cc: Rob Herring 
Cc: Jason Cooper 
Cc: Ard Biesheuvel 
Cc: Srinivas Kandagatla 
Cc: Thomas Petazzoni 
Cc: Miquel Raynal 
Link: https://lkml.kernel.org/r/20180508121438.11301-5-marc.zyngier@arm.com
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

netfilter: ipset: List timing out entries with "timeout 1" instead of zero

2018-08-06T14:24:31+00:00

[ Upstream commit bd975e691486ba52790ba23cc9b4fecab7bc0d31 ]

When listing sets with timeout support, there's a probability that
just timing out entries with "0" timeout value is listed/saved.
However when restoring the saved list, the zero timeout value means
permanent elelements.

The new behaviour is that timing out entries are listed with "timeout 1"
instead of zero.

Fixes netfilter bugzilla #1258.

Signed-off-by: Jozsef Kadlecsik 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

seccomp: Move speculation migitation control to arch code

2018-07-25T08:18:27+00:00

commit 8bf37d8c067bb7eb8e7c381bdadf9bd89182b6bc upstream

The migitation control is simpler to implement in architecture code as it
avoids the extra function call to check the mode. Aside of that having an
explicit seccomp enabled mode in the architecture mitigations would require
even more workarounds.

Move it into architecture code and provide a weak function in the seccomp
code. Remove the 'which' argument as this allows the architecture to decide
which mitigations are relevant for seccomp.

Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

seccomp: Add filter flag to opt-out of SSB mitigation

2018-07-25T08:18:27+00:00

commit 00a02d0c502a06d15e07b857f8ff921e3e402675 upstream

If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.

Signed-off-by: Kees Cook 
Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

prctl: Add force disable speculation

2018-07-25T08:18:27+00:00

commit 356e4bfff2c5489e016fdb925adbf12a1e3950ee upstream

For certain use cases it is desired to enforce mitigations so they cannot
be undone afterwards. That's important for loader stubs which want to
prevent a child from disabling the mitigation again. Will also be used for
seccomp(). The extra state preserving of the prctl state for SSB is a
preparatory step for EBPF dymanic speculation control.

Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

nospec: Allow getting/setting on non-current task

2018-07-25T08:18:26+00:00

commit 7bbf1373e228840bb0295a2ca26d548ef37f448e upstream

Adjust arch_prctl_get/set_spec_ctrl() to operate on tasks other than
current.

This is needed both for /proc/$pid/status queries and for seccomp (since
thread-syncing can trigger seccomp in non-current threads).

Signed-off-by: Kees Cook 
Signed-off-by: Thomas Gleixner 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

prctl: Add speculation control prctls

2018-07-25T08:18:25+00:00

commit b617cfc858161140d69cc0b5cc211996b557a1c7 upstream

Add two new prctls to control aspects of speculation related vulnerabilites
and their mitigations to provide finer grained control over performance
impacting mitigations.

PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
which is selected with arg2 of prctl(2). The return value uses bit 0-2 with
the following meaning:

Bit  Define           Description
0    PR_SPEC_PRCTL    Mitigation can be controlled per task by
                      PR_SET_SPECULATION_CTRL
1    PR_SPEC_ENABLE   The speculation feature is enabled, mitigation is
                      disabled
2    PR_SPEC_DISABLE  The speculation feature is disabled, mitigation is
                      enabled

If all bits are 0 the CPU is not affected by the speculation misfeature.

If PR_SPEC_PRCTL is set, then the per task control of the mitigation is
available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
misfeature will fail.

PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
is selected by arg2 of prctl(2) per task. arg3 is used to hand in the
control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE.

The common return values are:

EINVAL  prctl is not implemented by the architecture or the unused prctl()
        arguments are not 0
ENODEV  arg2 is selecting a not supported speculation misfeature

PR_SET_SPECULATION_CTRL has these additional return values:

ERANGE  arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE
ENXIO   prctl control of the selected speculation misfeature is disabled

The first supported controlable speculation misfeature is
PR_SPEC_STORE_BYPASS. Add the define so this can be shared between
architectures.

Based on an initial patch from Tim Chen and mostly rewritten.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Reviewed-by: Konrad Rzeszutek Wilk 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman

x86/bugs: Expose /sys/../spec_store_bypass

2018-07-25T08:18:24+00:00

commit c456442cd3a59eeb1d60293c26cbe2ff2c4e42cf upstream

Add the sysfs file for the new vulerability. It does not do much except
show the words 'Vulnerable' for recent x86 cores.

Intel cores prior to family 6 are known not to be vulnerable, and so are
some Atoms and some Xeon Phi.

It assumes that older Cyrix, Centaur, etc. cores are immune.

Signed-off-by: Konrad Rzeszutek Wilk 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Borislav Petkov 
Reviewed-by: Ingo Molnar 
Signed-off-by: David Woodhouse 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Srivatsa S. Bhat 
Reviewed-by: Matt Helsley (VMware) 
Reviewed-by: Alexey Makhalov 
Reviewed-by: Bo Gan 
Signed-off-by: Greg Kroah-Hartman