linux-stable.git/include/linux, branch v4.19.9

Drivers: hv: vmbus: Offload the handling of channels to two workqueues

2018-12-13T08:16:22+00:00

commit 37c2578c0c40e286bc0d30bdc05290b2058cf66e upstream.

vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.

The above is also true for primary channels, if the related device
drivers use sync probing mode by default.

And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.

The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).

The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.

So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b1396ec8.

Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger 
Cc: K. Y. Srinivasan 
Cc: Haiyang Zhang 
Signed-off-by: Dexuan Cui 
Signed-off-by: K. Y. Srinivasan 
Signed-off-by: Greg Kroah-Hartman

USB: serial: console: fix reported terminal settings

2018-12-13T08:16:15+00:00

commit f51ccf46217c28758b1f3b5bc0ccfc00eca658b2 upstream.

The USB-serial console implementation has never reported the actual
terminal settings used. Despite storing the corresponding cflags in its
struct console, these were never honoured on later tty open() where the
tty termios would be left initialised to the driver defaults.

Unlike the serial console implementation, the USB-serial code calls
subdriver open() already at console setup. While calling set_termios()
and write() before open() looks like it could work for some USB-serial
drivers, others definitely do not expect this, so modelling this after
serial core is going to be intrusive, if at all possible.

Instead, use a (renamed) tty helper to save the termios data used at
console setup so that the tty termios reflects the actual terminal
settings after a subsequent tty open().

Note that the calls to tty_init_termios() (tty_driver_install()) and
tty_save_termios() are serialised using the disconnect mutex.

This specifically fixes a regression that was triggered by a recent
change adding software flow control to the pl2303 driver: a getty trying
to disable flow control while leaving the baud rate unchanged would now
also set the baud rate to the driver default (prior to the flow-control
change this had been a noop).

Fixes: 7041d9c3f01b ("USB: serial: pl2303: add support for tx xon/xoff flow control")
Cc: stable 	# 4.18
Cc: Florian Zumbiehl 
Reported-by: Jarkko Nikula 
Tested-by: Jarkko Nikula 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Greg Kroah-Hartman

USB: check usb_get_extra_descriptor for proper size

2018-12-13T08:16:15+00:00

commit 704620afc70cf47abb9d6a1a57f3825d2bca49cf upstream.

When reading an extra descriptor, we need to properly check the minimum
and maximum size allowed, to prevent from invalid data being sent by a
device.

Reported-by: Hui Peng 
Reported-by: Mathias Payer 
Co-developed-by: Linus Torvalds 
Signed-off-by: Hui Peng 
Signed-off-by: Mathias Payer 
Signed-off-by: Linus Torvalds 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique

2018-12-08T11:59:07+00:00

commit 0c7a52e4d4b5c4d35b31f3c3ad32af814f1bf491 upstream.

After enabling KVM event tracing, almost all of trace_kvm_exit()'s
printk shows

	"kvm_exit: IRQ: ..."

even if the actual exception_type is NOT IRQ.  More specifically,
trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT.

This slight problem may have existed after commit e6753f23d961
("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are
two variables in trace_kvm_exit() and __DO_TRACE() which have the
same name, *idx*. Thus the actual value of *idx* will be overwritten
when tracing. Fix it by adding a simple prefix.

Cc: Joel Fernandes 
Cc: Wang Haibin 
Cc: linux-trace-devel@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Reviewed-by: Joel Fernandes (Google) 
Signed-off-by: Zenghui Yu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers

2018-12-05T18:32:13+00:00

commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad upstream.

Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.

This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.

While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.

Signed-off-by: Hans de Goede 
Acked-by: Srinivas Pandruvada 
Acked-by: Benjamin Tissoires 
Cc: 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman

function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack

2018-12-05T18:32:10+00:00

commit 39eb456dacb543de90d3bc6a8e0ac5cf51ac475e upstream.

Currently, the depth of the ret_stack is determined by curr_ret_stack index.
The issue is that there's a race between setting of the curr_ret_stack and
calling of the callback attached to the return of the function.

Commit 03274a3ffb44 ("tracing/fgraph: Adjust fgraph depth before calling
trace return callback") moved the calling of the callback to after the
setting of the curr_ret_stack, even stating that it was safe to do so, when
in fact, it was the reason there was a barrier() there (yes, I should have
commented that barrier()).

Not only does the curr_ret_stack keep track of the current call graph depth,
it also keeps the ret_stack content from being overwritten by new data.

The function profiler, uses the "subtime" variable of ret_stack structure
and by moving the curr_ret_stack, it allows for interrupts to use the same
structure it was using, corrupting the data, and breaking the profiler.

To fix this, there needs to be two variables to handle the call stack depth
and the pointer to where the ret_stack is being used, as they need to change
at two different locations.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

function_graph: Make ftrace_push_return_trace() static

2018-12-05T18:32:10+00:00

commit d125f3f866df88da5a85df00291f88f0baa89f7c upstream.

As all architectures now call function_graph_enter() to do the entry work,
no architecture should ever call ftrace_push_return_trace(). Make it static.

This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

function_graph: Create function_graph_enter() to consolidate architecture code

2018-12-05T18:32:09+00:00

commit 8114865ff82e200b383e46821c25cb0625b842b5 upstream.

Currently all the architectures do basically the same thing in preparing the
function graph tracer on entry to a function. This code can be pulled into a
generic location and then this will allow the function graph tracer to be
fixed, as well as extended.

Create a new function graph helper function_graph_enter() that will call the
hook function (ftrace_graph_entry) and the shadow stack operation
(ftrace_push_return_trace), and remove the need of the architecture code to
manage the shadow stack.

This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.

Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu 
Signed-off-by: Steven Rostedt (VMware) 
Signed-off-by: Greg Kroah-Hartman

x86/speculation: Add prctl() control for indirect branch speculation

2018-12-05T18:32:04+00:00

commit 9137bb27e60e554dab694eafa4cca241fa3a694f upstream

Add the PR_SPEC_INDIRECT_BRANCH option for the PR_GET_SPECULATION_CTRL and
PR_SET_SPECULATION_CTRL prctls to allow fine grained per task control of
indirect branch speculation via STIBP and IBPB.

Invocations:
 Check indirect branch speculation status with
 - prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);

 Enable indirect branch speculation with
 - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);

 Disable indirect branch speculation with
 - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);

 Force disable indirect branch speculation with
 - prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);

See Documentation/userspace-api/spec_ctrl.rst.

Signed-off-by: Tim Chen 
Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Jiri Kosina 
Cc: Tom Lendacky 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc: David Woodhouse 
Cc: Andi Kleen 
Cc: Dave Hansen 
Cc: Casey Schaufler 
Cc: Asit Mallick 
Cc: Arjan van de Ven 
Cc: Jon Masters 
Cc: Waiman Long 
Cc: Greg KH 
Cc: Dave Stewart 
Cc: Kees Cook 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.866780996@linutronix.de
Signed-off-by: Greg Kroah-Hartman

ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS

2018-12-05T18:32:03+00:00

commit 46f7ecb1e7359f183f5bbd1e08b90e10e52164f9 upstream

The IBPB control code in x86 removed the usage. Remove the functionality
which was introduced for this.

Signed-off-by: Thomas Gleixner 
Reviewed-by: Ingo Molnar 
Cc: Peter Zijlstra 
Cc: Andy Lutomirski 
Cc: Linus Torvalds 
Cc: Jiri Kosina 
Cc: Tom Lendacky 
Cc: Josh Poimboeuf 
Cc: Andrea Arcangeli 
Cc: David Woodhouse 
Cc: Tim Chen 
Cc: Andi Kleen 
Cc: Dave Hansen 
Cc: Casey Schaufler 
Cc: Asit Mallick 
Cc: Arjan van de Ven 
Cc: Jon Masters 
Cc: Waiman Long 
Cc: Greg KH 
Cc: Dave Stewart 
Cc: Kees Cook 
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.559149393@linutronix.de
Signed-off-by: Greg Kroah-Hartman