linux-stable.git/include/linux, branch v4.19.60

linux/kernel.h: fix overflow for DIV_ROUND_UP_ULL

2019-07-21T07:03:11+00:00

[ Upstream commit 8f9fab480c7a87b10bb5440b5555f370272a5d59 ]

DIV_ROUND_UP_ULL adds the two arguments and then invokes
DIV_ROUND_DOWN_ULL.  But on a 32bit system the addition of two 32 bit
values can overflow.  DIV_ROUND_DOWN_ULL does it correctly and stashes
the addition into a unsigned long long so cast the result to unsigned
long long here to avoid the overflow condition.

[akpm@linux-foundation.org: DIV_ROUND_UP_ULL must be an rval]
Link: http://lkml.kernel.org/r/20190625100518.30753-1-vkoul@kernel.org
Signed-off-by: Vinod Koul 
Reviewed-by: Andrew Morton 
Cc: Bjorn Andersson 
Cc: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin

drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT

2019-07-21T07:03:03+00:00

commit 83b44fe343b5abfcb1b2261289bd0cfcfcfd60a8 upstream.

The cacheinfo structures are alloced/freed by cpu online/offline
callbacks. Originally these were only used by sysfs to expose the
cache topology to user space. Without any in-kernel dependencies
CPUHP_AP_ONLINE_DYN was an appropriate choice.

resctrl has started using these structures to identify CPUs that
share a cache. It updates its 'domain' structures from cpu
online/offline callbacks. These depend on the cacheinfo structures
(resctrl_online_cpu()->domain_add_cpu()->get_cache_id()->
 get_cpu_cacheinfo()).
These also run as CPUHP_AP_ONLINE_DYN.

Now that there is an in-kernel dependency, move the cacheinfo
work earlier so we know its done before resctrl's CPUHP_AP_ONLINE_DYN
work runs.

Fixes: 2264d9c74dda1 ("x86/intel_rdt: Build structures for each resource based on cache topology")
Cc: 
Cc: Fenghua Yu 
Cc: Reinette Chatre 
Signed-off-by: James Morse 
Link: https://lore.kernel.org/r/20190624173656.202407-1-james.morse@arm.com
Signed-off-by: Greg Kroah-Hartman

VMCI: Fix integer overflow in VMCI handle arrays

2019-07-14T06:11:21+00:00

commit 1c2eb5b2853c9f513690ba6b71072d8eb65da16a upstream.

The VMCI handle array has an integer overflow in
vmci_handle_arr_append_entry when it tries to expand the array. This can be
triggered from a guest, since the doorbell link hypercall doesn't impose a
limit on the number of doorbell handles that a VM can create in the
hypervisor, and these handles are stored in a handle array.

In this change, we introduce a mandatory max capacity for handle
arrays/lists to avoid excessive memory usage.

Signed-off-by: Vishnu Dasa 
Reviewed-by: Adit Ranadive 
Reviewed-by: Jorgen Hansen 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K

2019-07-10T07:53:47+00:00

[ Upstream commit fdadd04931c2d7cd294dc5b2b342863f94be53a3 ]

Michael and Sandipan report:

  Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
  JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
  and is adjusted again at init time if MODULES_VADDR is defined.

  For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
  the compile-time default at boot-time, which is 0x9c400000 when
  using 64K page size. This overflows the signed 32-bit bpf_jit_limit
  value:

  root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
  -1673527296

  and can cause various unexpected failures throughout the network
  stack. In one case `strace dhclient eth0` reported:

  setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
             16) = -1 ENOTSUPP (Unknown error 524)

  and similar failures can be seen with tools like tcpdump. This doesn't
  always reproduce however, and I'm not sure why. The more consistent
  failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
  host would time out on systemd/netplan configuring a virtio-net NIC
  with no noticeable errors in the logs.

Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().

Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.

Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.

Fixes: ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das 
Reported-by: Michael Roth 
Signed-off-by: Daniel Borkmann 
Tested-by: Michael Roth 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Sasha Levin

bpf: fix unconnected udp hooks

2019-07-03T11:14:48+00:00

commit 983695fa676568fc0fe5ddd995c7267aabc24632 upstream.

Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e3779 ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.

Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:

  # cat /etc/resolv.conf
  nameserver 147.75.207.207
  nameserver 147.75.207.208

For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:

  # nslookup 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]
  ;; connection timed out; no servers could be reached

  # dig 1.1.1.1
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
  ;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
  [...]

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; connection timed out; no servers could be reached

For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:

  # nslookup 1.1.1.1 8.8.8.8
  1.1.1.1.in-addr.arpa	name = one.one.one.one.

In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.

Same example after this fix:

  # cilium service list
  ID   Frontend            Backend
  1    147.75.207.207:53   1 => 8.8.8.8:53
  2    147.75.207.208:53   1 => 8.8.8.8:53

Lookups work fine now:

  # nslookup 1.1.1.1
  1.1.1.1.in-addr.arpa    name = one.one.one.one.

  Authoritative answers can be found from:

  # dig 1.1.1.1

  ; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
  ;; global options: +cmd
  ;; Got answer:
  ;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550
  ;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1

  ;; OPT PSEUDOSECTION:
  ; EDNS: version: 0, flags:; udp: 512
  ;; QUESTION SECTION:
  ;1.1.1.1.                       IN      A

  ;; AUTHORITY SECTION:
  .                       23426   IN      SOA     a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400

  ;; Query time: 17 msec
  ;; SERVER: 147.75.207.207#53(147.75.207.207)
  ;; WHEN: Tue May 21 12:59:38 UTC 2019
  ;; MSG SIZE  rcvd: 111

And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:

  # tcpdump -i any udp
  [...]
  12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
  [...]

In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.

The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.

For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.

Fixes: 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
Signed-off-by: Daniel Borkmann 
Acked-by: Andrey Ignatov 
Acked-by: Martin KaFai Lau 
Acked-by: Martynas Pumputis 
Signed-off-by: Alexei Starovoitov 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Greg Kroah-Hartman

SUNRPC: Clean up initialisation of the struct rpc_rqst

2019-07-03T11:14:46+00:00

commit 9dc6edcf676fe188430e8b119f91280bbf285163 upstream.

Move the initialisation back into xprt.c.

Signed-off-by: Trond Myklebust 
Cc: Yihao Wu 
Cc: Caspar Zhang 
Signed-off-by: Greg Kroah-Hartman

mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()

2019-06-25T03:35:53+00:00

commit b4c9f938d542d5f88c501744d2d12fad4fd2915f upstream.

We want SDIO drivers to be able to temporarily stop retuning when the
driver knows that the SDIO card is not in a state where retuning will
work (maybe because the card is asleep).  We'll move the relevant
functions to a place where drivers can call them.

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson 
Acked-by: Adrian Hunter 
Acked-by: Kalle Valo 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

mmc: core: API to temporarily disable retuning for SDIO CRC errors

2019-06-25T03:35:53+00:00

commit 0a55f4ab9678413a01e740c86e9367ba0c612b36 upstream.

Normally when the MMC core sees an "-EILSEQ" error returned by a host
controller then it will trigger a retuning of the card.  This is
generally a good idea.

However, if a command is expected to sometimes cause transfer errors
then these transfer errors shouldn't cause a re-tuning.  This
re-tuning will be a needless waste of time.  One example case where a
transfer is expected to cause errors is when transitioning between
idle (sometimes referred to as "sleep" in Broadcom code) and active
state on certain Broadcom WiFi SDIO cards.  Specifically if the card
was already transitioning between states when the command was sent it
could cause an error on the SDIO bus.

Let's add an API that the SDIO function drivers can call that will
temporarily disable the auto-tuning functionality.  Then we can add a
call to this in the Broadcom WiFi driver and any other driver that
might have similar needs.

NOTE: this makes the assumption that the card is already tuned well
enough that it's OK to disable the auto-retuning during one of these
error-prone situations.  Presumably the driver code performing the
error-prone transfer knows how to recover / retry from errors.  ...and
after we can get back to a state where transfers are no longer
error-prone then we can enable the auto-retuning again.  If we truly
find ourselves in a case where the card needs to be retuned sometimes
to handle one of these error-prone transfers then we can always try a
few transfers first without auto-retuning and then re-try with
auto-retuning if the first few fail.

Without this change on rk3288-veyron-minnie I periodically see this in
the logs of a machine just sitting there idle:
  dwmmc_rockchip ff0d0000.dwmmc: Successfully tuned phase to XYZ

Cc: stable@vger.kernel.org #v4.18+
Signed-off-by: Douglas Anderson 
Acked-by: Adrian Hunter 
Acked-by: Kalle Valo 
Signed-off-by: Ulf Hansson 
Signed-off-by: Greg Kroah-Hartman

coredump: fix race condition between collapse_huge_page() and core dumping

2019-06-22T06:15:21+00:00

commit 59ea6d06cfa9247b586a695c21f94afa7183af74 upstream.

When fixing the race conditions between the coredump and the mmap_sem
holders outside the context of the process, we focused on
mmget_not_zero()/get_task_mm() callers in 04f5866e41fb70 ("coredump: fix
race condition between mmget_not_zero()/get_task_mm() and core
dumping"), but those aren't the only cases where the mmap_sem can be
taken outside of the context of the process as Michal Hocko noticed
while backporting that commit to older -stable kernels.

If mmgrab() is called in the context of the process, but then the
mm_count reference is transferred outside the context of the process,
that can also be a problem if the mmap_sem has to be taken for writing
through that mm_count reference.

khugepaged registration calls mmgrab() in the context of the process,
but the mmap_sem for writing is taken later in the context of the
khugepaged kernel thread.

collapse_huge_page() after taking the mmap_sem for writing doesn't
modify any vma, so it's not obvious that it could cause a problem to the
coredump, but it happens to modify the pmd in a way that breaks an
invariant that pmd_trans_huge_lock() relies upon.  collapse_huge_page()
needs the mmap_sem for writing just to block concurrent page faults that
call pmd_trans_huge_lock().

Specifically the invariant that "!pmd_trans_huge()" cannot become a
"pmd_trans_huge()" doesn't hold while collapse_huge_page() runs.

The coredump will call __get_user_pages() without mmap_sem for reading,
which eventually can invoke a lockless page fault which will need a
functional pmd_trans_huge_lock().

So collapse_huge_page() needs to use mmget_still_valid() to check it's
not running concurrently with the coredump...  as long as the coredump
can invoke page faults without holding the mmap_sem for reading.

This has "Fixes: khugepaged" to facilitate backporting, but in my view
it's more a bug in the coredump code that will eventually have to be
rewritten to stop invoking page faults without the mmap_sem for reading.
So the long term plan is still to drop all mmget_still_valid().

Link: http://lkml.kernel.org/r/20190607161558.32104-1-aarcange@redhat.com
Fixes: ba76149f47d8 ("thp: khugepaged")
Signed-off-by: Andrea Arcangeli 
Reported-by: Michal Hocko 
Acked-by: Michal Hocko 
Acked-by: Kirill A. Shutemov 
Cc: Oleg Nesterov 
Cc: Jann Horn 
Cc: Hugh Dickins 
Cc: Mike Rapoport 
Cc: Mike Kravetz 
Cc: Peter Xu 
Cc: Jason Gunthorpe 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback

2019-06-19T06:18:06+00:00

commit 78f4e932f7760d965fb1569025d1576ab77557c5 upstream.

Adric Blake reported the following warning during suspend-resume:

  Enabling non-boot CPUs ...
  x86: Booting SMP configuration:
  smpboot: Booting Node 0 Processor 1 APIC 0x2
  unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
   at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
  Call Trace:
   intel_set_tfa
   intel_pmu_cpu_starting
   ? x86_pmu_dead_cpu
   x86_pmu_starting_cpu
   cpuhp_invoke_callback
   ? _raw_spin_lock_irqsave
   notify_cpu_starting
   start_secondary
   secondary_startup_64
  microcode: sig=0x806ea, pf=0x80, revision=0x96
  microcode: updated to revision 0xb4, date = 2019-04-01
  CPU1 is up

The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.

Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.

Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake 
Signed-off-by: Borislav Petkov 
Reviewed-by: Thomas Gleixner 
Cc: Peter Zijlstra 
Cc: 
Cc: x86@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
Signed-off-by: Greg Kroah-Hartman