linux-stable.git/include/linux, branch v4.19.151

mm: khugepaged: recalculate min_free_kbytes after memory hotplug as expected by khugepaged

2020-10-14T08:31:26+00:00

commit 4aab2be0983031a05cb4a19696c9da5749523426 upstream.

When memory is hotplug added or removed the min_free_kbytes should be
recalculated based on what is expected by khugepaged.  Currently after
hotplug, min_free_kbytes will be set to a lower default and higher
default set when THP enabled is lost.

This change restores min_free_kbytes as expected for THP consumers.

[vijayb@linux.microsoft.com: v5]
  Link: https://lkml.kernel.org/r/1601398153-5517-1-git-send-email-vijayb@linux.microsoft.com

Fixes: f000565adb77 ("thp: set recommended min free kbytes")
Signed-off-by: Vijay Balakrishna 
Signed-off-by: Andrew Morton 
Reviewed-by: Pavel Tatashin 
Acked-by: Michal Hocko 
Cc: Allen Pais 
Cc: Andrea Arcangeli 
Cc: "Kirill A. Shutemov" 
Cc: Oleg Nesterov 
Cc: Song Liu 
Cc: 
Link: https://lkml.kernel.org/r/1600305709-2319-2-git-send-email-vijayb@linux.microsoft.com
Link: https://lkml.kernel.org/r/1600204258-13683-1-git-send-email-vijayb@linux.microsoft.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

Fonts: Support FONT_EXTRA_WORDS macros for built-in fonts

2020-10-14T08:31:21+00:00

commit 6735b4632def0640dbdf4eb9f99816aca18c4f16 upstream.

syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.

In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.

For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:

Recently we have gathered all the above macros to . Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.

This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".

Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman

fbdev, newport_con: Move FONT_EXTRA_WORDS macros into linux/font.h

2020-10-14T08:31:21+00:00

commit bb0890b4cd7f8203e3aa99c6d0f062d6acdaad27 upstream.

drivers/video/console/newport_con.c is borrowing FONT_EXTRA_WORDS macros
from drivers/video/fbdev/core/fbcon.h. To keep things simple, move all
definitions into .

Since newport_con now uses four extra words, initialize the fourth word in
newport_set_font() properly.

Cc: stable@vger.kernel.org
Signed-off-by: Peilin Ye 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Daniel Vetter 
Link: https://patchwork.freedesktop.org/patch/msgid/7fb8bc9b0abc676ada6b7ac0e0bd443499357267.1600953813.git.yepeilin.cs@gmail.com
Signed-off-by: Greg Kroah-Hartman

mm: don't rely on system state to detect hot-plug operations

2020-10-07T06:00:08+00:00

commit f85086f95fa36194eb0db5cd5c12e56801b98523 upstream.

In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation.  Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state.  In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1].  So checking against the system state is not
enough.

The consequence is that on system with interleaved node's ranges like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done.  At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:

  $ ls -l /sys/devices/system/memory/memory21/node*
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -> ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -> ../../node/node2

In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  Oops: Exception in kernel mode, sig: 5 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation.  An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.

[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:

  $QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
        -m size=$MEM,slots=255,maxmem=4294967296k  \
        -numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
        -object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
        -object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
        -object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
        -object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
        -object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
        -object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
        -object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \

Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour 
Signed-off-by: Andrew Morton 
Reviewed-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Acked-by: Michal Hocko 
Cc: Greg Kroah-Hartman 
Cc: "Rafael J. Wysocki" 
Cc: Fenghua Yu 
Cc: Nathan Lynch 
Cc: Scott Cheloha 
Cc: Tony Luck 
Cc: 
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: replace memmap_context by meminit_context

2020-10-07T06:00:08+00:00

commit c1d0da83358a2316d9be7f229f26126dbaa07468 upstream.

Patch series "mm: fix memory to node bad links in sysfs", v3.

Sometimes, firmware may expose interleaved memory layout like this:

 Early memory node ranges
   node   1: [mem 0x0000000000000000-0x000000011fffffff]
   node   2: [mem 0x0000000120000000-0x000000014fffffff]
   node   1: [mem 0x0000000150000000-0x00000001ffffffff]
   node   0: [mem 0x0000000200000000-0x000000048fffffff]
   node   2: [mem 0x0000000490000000-0x00000007ffffffff]

In that case, we can see memory blocks assigned to multiple nodes in
sysfs:

  $ ls -l /sys/devices/system/memory/memory21
  total 0
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node1 -> ../../node/node1
  lrwxrwxrwx 1 root root     0 Aug 24 05:27 node2 -> ../../node/node2
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 online
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
  -r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
  drwxr-xr-x 2 root root     0 Aug 24 05:27 power
  -r--r--r-- 1 root root 65536 Aug 24 05:27 removable
  -rw-r--r-- 1 root root 65536 Aug 24 05:27 state
  lrwxrwxrwx 1 root root     0 Aug 24 05:25 subsystem -> ../../../../bus/memory
  -rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
  -r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones

The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.

This is wrong but doesn't prevent the system to run.  However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:

  kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
  CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
  Call Trace:
    add_memory_resource+0x23c/0x340 (unreliable)
    __add_memory+0x5c/0xf0
    dlpar_add_lmb+0x1b4/0x500
    dlpar_memory+0x1f8/0xb80
    handle_dlpar_errorlog+0xc0/0x190
    dlpar_store+0x198/0x4a0
    kobj_attr_store+0x30/0x50
    sysfs_kf_write+0x64/0x90
    kernfs_fop_write+0x1b0/0x290
    vfs_write+0xe8/0x290
    ksys_write+0xdc/0x130
    system_call_exception+0x160/0x270
    system_call_common+0xf0/0x27c

This has been seen on PowerPC LPAR.

The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.

There are two issues here:

 (a) The sysfs memory and node's layouts are broken due to these
     multiple links

 (b) The link errors in link_mem_sections() should not lead to a system
     panic.

To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not.  This is addressed by the patches 1 and 2 of this
series.

Issue (b) will be addressed separately.

This patch (of 2):

The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.

Make it general to the hotplug operation and rename it as
meminit_context.

There is no functional change introduced by this patch

Suggested-by: David Hildenbrand 
Signed-off-by: Laurent Dufour 
Signed-off-by: Andrew Morton 
Reviewed-by: David Hildenbrand 
Reviewed-by: Oscar Salvador 
Acked-by: Michal Hocko 
Cc: Greg Kroah-Hartman 
Cc: "Rafael J . Wysocki" 
Cc: Nathan Lynch 
Cc: Scott Cheloha 
Cc: Tony Luck 
Cc: Fenghua Yu 
Cc: 
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()

2020-10-07T06:00:05+00:00

[ Upstream commit 4c7246dc45e2706770d5233f7ce1597a07e069ba ]

We are going to add 'struct vsock_sock *' parameter to
virtio_transport_get_ops().

In some cases, like in the virtio_transport_reset_no_sock(),
we don't have any socket assigned to the packet received,
so we can't use the virtio_transport_get_ops().

In order to allow virtio_transport_reset_no_sock() to use the
'.send_pkt' callback from the 'vhost_transport' or 'virtio_transport',
we add the 'struct virtio_transport *' to it and to its caller:
virtio_transport_recv_pkt().

We moved the 'vhost_transport' and 'virtio_transport' definition,
to pass their address to the virtio_transport_recv_pkt().

Reviewed-by: Stefan Hajnoczi 
Signed-off-by: Stefano Garzarella 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin

ata: make qc_prep return ata_completion_errors

2020-10-01T11:14:54+00:00

commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream.

In case a driver wants to return an error from qc_prep, return enum
ata_completion_errors. sata_mv is one of those drivers -- see the next
patch. Other drivers return the newly defined AC_ERR_OK.

[v2] use enum ata_completion_errors and AC_ERR_OK.

Signed-off-by: Jiri Slaby 
Cc: Jens Axboe 
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

ata: define AC_ERR_OK

2020-10-01T11:14:54+00:00

commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream.

Since we will return enum ata_completion_errors from qc_prep in the next
patch, let's define AC_ERR_OK to mark the OK status.

Signed-off-by: Jiri Slaby 
Cc: Jens Axboe 
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jens Axboe 
Signed-off-by: Greg Kroah-Hartman

NFS: Fix races nfs_page_group_destroy() vs nfs_destroy_unlinked_subrequests()

2020-10-01T11:14:41+00:00

[ Upstream commit 08ca8b21f760c0ed5034a5c122092eec22ccf8f4 ]

When a subrequest is being detached from the subgroup, we want to
ensure that it is not holding the group lock, or in the process
of waiting for the group lock.

Fixes: 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Signed-off-by: Trond Myklebust 
Signed-off-by: Sasha Levin

PCI: Use ioremap(), not phys_to_virt() for platform ROM

2020-10-01T11:14:40+00:00

[ Upstream commit 72e0ef0e5f067fd991f702f0b2635d911d0cf208 ]

On some EFI systems, the video BIOS is provided by the EFI firmware.  The
boot stub code stores the physical address of the ROM image in pdev->rom.
Currently we attempt to access this pointer using phys_to_virt(), which
doesn't work with CONFIG_HIGHMEM.

On these systems, attempting to load the radeon module on a x86_32 kernel
can result in the following:

  BUG: unable to handle page fault for address: 3e8ed03c
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  *pde = 00000000
  Oops: 0000 [#1] PREEMPT SMP
  CPU: 0 PID: 317 Comm: systemd-udevd Not tainted 5.6.0-rc3-next-20200228 #2
  Hardware name: Apple Computer, Inc. MacPro1,1/Mac-F4208DC8, BIOS     MP11.88Z.005C.B08.0707021221 07/02/07
  EIP: radeon_get_bios+0x5ed/0xe50 [radeon]
  Code: 00 00 84 c0 0f 85 12 fd ff ff c7 87 64 01 00 00 00 00 00 00 8b 47 08 8b 55 b0 e8 1e 83 e1 d6 85 c0 74 1a 8b 55 c0 85 d2 74 13 <80> 38 55 75 0e 80 78 01 aa 0f 84 a4 03 00 00 8d 74 26 00 68 dc 06
  EAX: 3e8ed03c EBX: 00000000 ECX: 3e8ed03c EDX: 00010000
  ESI: 00040000 EDI: eec04000 EBP: eef3fc60 ESP: eef3fbe0
  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010206
  CR0: 80050033 CR2: 3e8ed03c CR3: 2ec77000 CR4: 000006d0
  Call Trace:
   r520_init+0x26/0x240 [radeon]
   radeon_device_init+0x533/0xa50 [radeon]
   radeon_driver_load_kms+0x80/0x220 [radeon]
   drm_dev_register+0xa7/0x180 [drm]
   radeon_pci_probe+0x10f/0x1a0 [radeon]
   pci_device_probe+0xd4/0x140

Fix the issue by updating all drivers which can access a platform provided
ROM. Instead of calling the helper function pci_platform_rom() which uses
phys_to_virt(), call ioremap() directly on the pdev->rom.

radeon_read_platform_bios() previously directly accessed an __iomem
pointer. Avoid this by calling memcpy_fromio() instead of kmemdup().

pci_platform_rom() now has no remaining callers, so remove it.

Link: https://lore.kernel.org/r/20200319021623.5426-1-mikel@mikelr.com
Signed-off-by: Mikel Rychliski 
Signed-off-by: Bjorn Helgaas 
Acked-by: Alex Deucher 
Signed-off-by: Sasha Levin