linux-stable.git/include/linux, branch v3.4.83

nbd: correct disconnect behavior

2014-03-11T23:10:06+00:00

commit c378f70adbc1bbecd9e6db145019f14b2f688c7c upstream.

Currently, when a disconnect is requested by the user (via NBD_DISCONNECT
ioctl) the return from NBD_DO_IT is undefined (it is usually one of
several error codes).  This means that nbd-client does not know if a
manual disconnect was performed or whether a network error occurred.
Because of this, nbd-client's persist mode (which tries to reconnect after
error, but not after manual disconnect) does not always work correctly.

This change fixes this by causing NBD_DO_IT to always return 0 if a user
requests a disconnect.  This means that nbd-client can correctly either
persist the connection (if an error occurred) or disconnect (if the user
requested it).

Signed-off-by: Paul Clements 
Acked-by: Rob Landley 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
[xr: Backported to 3.4: adjust context]
Signed-off-by: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

ext4/jbd2: don't wait (forever) for stale tid caused by wraparound

2014-03-11T23:10:05+00:00

commit d76a3a77113db020d9bb1e894822869410450bd9 upstream.

In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" 
Reported-by: Ben Hutchings 
Reported-by: George Barnett 
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings 
Cc: Rui Xiang 
Signed-off-by: Greg Kroah-Hartman

cgroup: fix RCU accesses to task->cgroups

2014-03-11T23:10:04+00:00

commit 14611e51a57df10240817d8ada510842faf0ec51 upstream.

task->cgroups is a RCU pointer pointing to struct css_set.  A task
switches to a different css_set on cgroup migration but a css_set
doesn't change once created and its pointers to cgroup_subsys_states
aren't RCU protected.

task_subsys_state[_check]() is the macro to acquire css given a task
and subsys_id pair.  It RCU-dereferences task->cgroups->subsys[] not
task->cgroups, so the RCU pointer task->cgroups ends up being
dereferenced without read_barrier_depends() after it.  It's broken.

Fix it by introducing task_css_set[_check]() which does
RCU-dereference on task->cgroups.  task_subsys_state[_check]() is
reimplemented to directly dereference ->subsys[] of the css_set
returned from task_css_set[_check]().

This removes some of sparse RCU warnings in cgroup.

v2: Fixed unbalanced parenthsis and there's no need to use
    rcu_dereference_raw() when !CONFIG_PROVE_RCU.  Both spotted by Li.

Signed-off-by: Tejun Heo 
Reported-by: Fengguang Wu 
Acked-by: Li Zefan 
[bwh: Backported to 3.2:
 - Adjust context
 - Remove CONFIG_PROVE_RCU condition
 - s/lockdep_is_held(&cgroup_mutex)/cgroup_lock_is_held()/]
Signed-off-by: Ben Hutchings 
Cc: Qiang Huang 
Signed-off-by: Greg Kroah-Hartman

cgroup: cgroup_subsys->fork() should be called after the task is added to css_set

2014-03-11T23:10:03+00:00

commit 5edee61edeaaebafe584f8fb7074c1ef4658596b upstream.

cgroup core has a bug which violates a basic rule about event
notifications - when a new entity needs to be added, you add that to
the notification list first and then make the new entity conform to
the current state.  If done in the reverse order, an event happening
inbetween will be lost.

cgroup_subsys->fork() is invoked way before the new task is added to
the css_set.  Currently, cgroup_freezer is the only user of ->fork()
and uses it to make new tasks conform to the current state of the
freezer.  If FROZEN state is requested while fork is in progress
between cgroup_fork_callbacks() and cgroup_post_fork(), the child
could escape freezing - the cgroup isn't frozen when ->fork() is
called and the freezer couldn't see the new task on the css_set.

This patch moves cgroup_subsys->fork() invocation to
cgroup_post_fork() after the new task is added to the css_set.
cgroup_fork_callbacks() is removed.

Because now a task may be migrated during cgroup_subsys->fork(),
freezer_fork() is updated so that it adheres to the usual RCU locking
and the rather pointless comment on why locking can be different there
is removed (if it doesn't make anything simpler, why even bother?).

Signed-off-by: Tejun Heo 
Cc: Oleg Nesterov 
Cc: Rafael J. Wysocki 
[hq: Backported to 3.4:
 - Adjust context
 - Iterate over first CGROUP_BUILTIN_SUBSYS_COUNT elements of subsys]
Signed-off-by: Qiang Huang 
Signed-off-by: Greg Kroah-Hartman

net: ip, ipv6: handle gso skbs in forwarding path

2014-03-11T23:09:59+00:00

commit fe6cc55f3a9a053482a76f5a6b2257cee51b4663 upstream.

[ use zero netdev_feature mask to avoid backport of
  netif_skb_dev_features function ]

Marcelo Ricardo Leitner reported problems when the forwarding link path
has a lower mtu than the incoming one if the inbound interface supports GRO.

Given:
Host  R1  R2

Host sends tcp stream which is routed via R1 and R2.  R1 performs GRO.

In this case, the kernel will fail to send ICMP fragmentation needed
messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu
checks in forward path. Instead, Linux tries to send out packets exceeding
the mtu.

When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does
not fragment the packets when forwarding, and again tries to send out
packets exceeding R1-R2 link mtu.

This alters the forwarding dstmtu checks to take the individual gso
segment lengths into account.

For ipv6, we send out pkt too big error for gso if the individual
segments are too big.

For ipv4, we either send icmp fragmentation needed, or, if the DF bit
is not set, perform software segmentation and let the output path
create fragments when the packet is leaving the machine.
It is not 100% correct as the error message will contain the headers of
the GRO skb instead of the original/segmented one, but it seems to
work fine in my (limited) tests.

Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid
sofware segmentation.

However it turns out that skb_segment() assumes skb nr_frags is related
to mss size so we would BUG there.  I don't want to mess with it considering
Herbert and Eric disagree on what the correct behavior should be.

Hannes Frederic Sowa notes that when we would shrink gso_size
skb_segment would then also need to deal with the case where
SKB_MAX_FRAGS would be exceeded.

This uses sofware segmentation in the forward path when we hit ipv4
non-DF packets and the outgoing link mtu is too small.  Its not perfect,
but given the lack of bug reports wrt. GRO fwd being broken this is a
rare case anyway.  Also its not like this could not be improved later
once the dust settles.

Acked-by: Herbert Xu 
Reported-by: Marcelo Ricardo Leitner 
Signed-off-by: Florian Westphal 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: add and use skb_gso_transport_seglen()

2014-03-11T23:09:59+00:00

commit de960aa9ab4decc3304959f69533eef64d05d8e8 upstream.

[ no skb_gso_seglen helper in 3.4, leave tbf alone ]

This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to
skbuff core so it may be reused by upcoming ip forwarding path patch.

Signed-off-by: Florian Westphal 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

sched/nohz: Fix rq->cpu_load calculations some more

2014-02-20T18:45:32+00:00

commit 5aaa0b7a2ed5b12692c9ffb5222182bd558d3146 upstream.

Follow up on commit 556061b00 ("sched/nohz: Fix rq->cpu_load[]
calculations") since while that fixed the busy case it regressed the
mostly idle case.

Add a callback from the nohz exit to also age the rq->cpu_load[]
array. This closes the hole where either there was no nohz load
balance pass during the nohz, or there was a 'significant' amount of
idle time between the last nohz balance and the nohz exit.

So we'll update unconditionally from the tick to not insert any
accidental 0 load periods while busy, and we try and catch up from
nohz idle balance and nohz exit. Both these are still prone to missing
a jiffy, but that has always been the case.

Signed-off-by: Peter Zijlstra 
Cc: pjt@google.com
Cc: Venkatesh Pallipadi 
Link: http://lkml.kernel.org/n/tip-kt0trz0apodbf84ucjfdbr1a@git.kernel.org
Signed-off-by: Ingo Molnar 
Cc: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

sched/rt: Avoid updating RT entry timeout twice within one tick period

2014-02-13T19:51:19+00:00

commit 57d2aa00dcec67afa52478730f2b524521af14fb upstream.

The issue below was found in 2.6.34-rt rather than mainline rt
kernel, but the issue still exists upstream as well.

So please let me describe how it was noticed on 2.6.34-rt:

On this version, each softirq has its own thread, it means there
is at least one RT FIFO task per cpu. The priority of these
tasks is set to 49 by default. If user launches an RT FIFO task
with priority lower than 49 of softirq RT tasks, it's possible
there are two RT FIFO tasks enqueued one cpu runqueue at one
moment. By current strategy of balancing RT tasks, when it comes
to RT tasks, we really need to put them off to a CPU that they
can run on as soon as possible. Even if it means a bit of cache
line flushing, we want RT tasks to be run with the least latency.

When the user RT FIFO task which just launched before is
running, the sched timer tick of the current cpu happens. In this
tick period, the timeout value of the user RT task will be
updated once. Subsequently, we try to wake up one softirq RT
task on its local cpu. As the priority of current user RT task
is lower than the softirq RT task, the current task will be
preempted by the higher priority softirq RT task. Before
preemption, we check to see if current can readily move to a
different cpu. If so, we will reschedule to allow the RT push logic
to try to move current somewhere else. Whenever the woken
softirq RT task runs, it first tries to migrate the user FIFO RT
task over to a cpu that is running a task of lesser priority. If
migration is done, it will send a reschedule request to the found
cpu by IPI interrupt. Once the target cpu responds the IPI
interrupt, it will pick the migrated user RT task to preempt its
current task. When the user RT task is running on the new cpu,
the sched timer tick of the cpu fires. So it will tick the user
RT task again. This also means the RT task timeout value will be
updated again. As the migration may be done in one tick period,
it means the user RT task timeout value will be updated twice
within one tick.

If we set a limit on the amount of cpu time for the user RT task
by setrlimit(RLIMIT_RTTIME), the SIGXCPU signal should be posted
upon reaching the soft limit.

But exactly when the SIGXCPU signal should be sent depends on the
RT task timeout value. In fact the timeout mechanism of sending
the SIGXCPU signal assumes the RT task timeout is increased once
every tick.

However, currently the timeout value may be added twice per
tick. So it results in the SIGXCPU signal being sent earlier
than expected.

To solve this issue, we prevent the timeout value from increasing
twice within one tick time by remembering the jiffies value of
last updating the timeout. As long as the RT task's jiffies is
different with the global jiffies value, we allow its timeout to
be updated.

Signed-off-by: Ying Xue 
Signed-off-by: Fan Du 
Reviewed-by: Yong Zhang 
Acked-by: Steven Rostedt 
Cc: 
Link: http://lkml.kernel.org/r/1342508623-2887-1-git-send-email-ying.xue@windriver.com
Signed-off-by: Ingo Molnar 
[ lizf: backported to 3.4: adjust context ]
Signed-off-by: Li Zefan 
Signed-off-by: Greg Kroah-Hartman

audit: correct a type mismatch in audit_syscall_exit()

2014-02-13T19:51:08+00:00

commit 06bdadd7634551cfe8ce071fe44d0311b3033d9e upstream.

audit_syscall_exit() saves a result of regs_return_value() in intermediate
"int" variable and passes it to __audit_syscall_exit(), which expects its
second argument as a "long" value.  This will result in truncating the
value returned by a system call and making a wrong audit record.

I don't know why gcc compiler doesn't complain about this, but anyway it
causes a problem at runtime on arm64 (and probably most 64-bit archs).

Signed-off-by: AKASHI Takahiro 
Cc: Al Viro 
Cc: Eric Paris 
Signed-off-by: Andrew Morton 
Signed-off-by: Eric Paris 
Signed-off-by: Greg Kroah-Hartman

mm: hugetlbfs: fix hugetlbfs optimization

2014-02-06T19:05:46+00:00

commit 27c73ae759774e63313c1fbfeb17ba076cea64c5 upstream.

Commit 7cb2ef56e6a8 ("mm: fix aio performance regression for database
caused by THP") can cause dereference of a dangling pointer if
split_huge_page runs during PageHuge() if there are updates to the
tail_page->private field.

Also it is repeating compound_head twice for hugetlbfs and it is running
compound_head+compound_trans_head for THP when a single one is needed in
both cases.

The new code within the PageSlab() check doesn't need to verify that the
THP page size is never bigger than the smallest hugetlbfs page size, to
avoid memory corruption.

A longstanding theoretical race condition was found while fixing the
above (see the change right after the skip_unlock label, that is
relevant for the compound_lock path too).

By re-establishing the _mapcount tail refcounting for all compound
pages, this also fixes the below problem:

  echo 0 >/sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages

  BUG: Bad page state in process bash  pfn:59a01
  page:ffffea000139b038 count:0 mapcount:10 mapping:          (null) index:0x0
  page flags: 0x1c00000000008000(tail)
  Modules linked in:
  CPU: 6 PID: 2018 Comm: bash Not tainted 3.12.0+ #25
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    dump_stack+0x55/0x76
    bad_page+0xd5/0x130
    free_pages_prepare+0x213/0x280
    __free_pages+0x36/0x80
    update_and_free_page+0xc1/0xd0
    free_pool_huge_page+0xc2/0xe0
    set_max_huge_pages.part.58+0x14c/0x220
    nr_hugepages_store_common.isra.60+0xd0/0xf0
    nr_hugepages_store+0x13/0x20
    kobj_attr_store+0xf/0x20
    sysfs_write_file+0x189/0x1e0
    vfs_write+0xc5/0x1f0
    SyS_write+0x55/0xb0
    system_call_fastpath+0x16/0x1b

Signed-off-by: Khalid Aziz 
Signed-off-by: Andrea Arcangeli 
Tested-by: Khalid Aziz 
Cc: Pravin Shelar 
Cc: Greg Kroah-Hartman 
Cc: Ben Hutchings 
Cc: Christoph Lameter 
Cc: Johannes Weiner 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Minchan Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Guillaume Morin 
Signed-off-by: Greg Kroah-Hartman