linux-stable.git/include/linux, branch v3.4.110

jbd2: avoid infinite loop when destroying aborted journal

2015-10-22T01:20:08+00:00

commit 841df7df196237ea63233f0f9eaa41db53afd70f upstream.

Commit 6f6a6fda2945 "jbd2: fix ocfs2 corrupt when updating journal
superblock fails" changed jbd2_cleanup_journal_tail() to return EIO
when the journal is aborted. That makes logic in
jbd2_log_do_checkpoint() bail out which is fine, except that
jbd2_journal_destroy() expects jbd2_log_do_checkpoint() to always make
a progress in cleaning the journal. Without it jbd2_journal_destroy()
just loops in an infinite loop.

Fix jbd2_journal_destroy() to cleanup journal checkpoint lists of
jbd2_log_do_checkpoint() fails with error.

Reported-by: Eryu Guan 
Tested-by: Eryu Guan 
Fixes: 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a
Signed-off-by: Jan Kara 
Signed-off-by: Theodore Ts'o 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

nfs: increase size of EXCHANGE_ID name string buffer

2015-10-22T01:20:05+00:00

commit 764ad8ba8cd4c6f836fca9378f8c5121aece0842 upstream.

The current buffer is much too small if you have a relatively long
hostname. Bring it up to the size of the one that SETCLIENTID has.

Reported-by: Michael Skralivetsky 
Signed-off-by: Jeff Layton 
Signed-off-by: Trond Myklebust 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

jbd2: fix ocfs2 corrupt when updating journal superblock fails

2015-10-22T01:20:04+00:00

commit 6f6a6fda294506dfe0e3e0a253bb2d2923f28f0a upstream.

If updating journal superblock fails after journal data has been
flushed, the error is omitted and this will mislead the caller as a
normal case.  In ocfs2, the checkpoint will be treated successfully
and the other node can get the lock to update. Since the sb_start is
still pointing to the old log block, it will rewrite the journal data
during journal recovery by the other node. Thus the new updates will
be overwritten and ocfs2 corrupts.  So in above case we have to return
the error, and ocfs2_commit_cache will take care of the error and
prevent the other node to do update first.  And only after recovering
journal it can do the new updates.

The issue discussion mail can be found at:
https://oss.oracle.com/pipermail/ocfs2-devel/2015-June/010856.html
http://comments.gmane.org/gmane.comp.file-systems.ext4/48841

[ Fixed bug in patch which allowed a non-negative error return from
  jbd2_cleanup_journal_tail() to leak out of jbd2_fjournal_flush(); this
  was causing xfstests ext4/306 to fail. -- Ted ]

Reported-by: Yiwen Jiang 
Signed-off-by: Joseph Qi 
Signed-off-by: Theodore Ts'o 
Tested-by: Yiwen Jiang 
Cc: Junxiao Bi 
Signed-off-by: Zefan Li

libata: Ignore spurious PHY event on LPM policy change

2015-09-18T01:20:37+00:00

commit 09c5b4803a80a5451d950d6a539d2eb311dc0fb1 upstream.

When the LPM policy is set to ATA_LPM_MAX_POWER, the device might
generate a spurious PHY event that cuases errors on the link.
Ignore this event if it occured within 10s after the policy change.

The timeout was chosen observing that on a Dell XPS13 9333 these
spurious events can occur up to roughly 6s after the policy change.

Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13
Signed-off-by: Gabriele Mazzotta 
Signed-off-by: Tejun Heo 
[lizf: Backported to 3.4: adjust context]
Signed-off-by: Zefan Li

libata: Add helper to determine when PHY events should be ignored

2015-09-18T01:20:37+00:00

commit 8393b811f38acdf7fd8da2028708edad3e68ce1f upstream.

This is a preparation commit that will allow to add other criteria
according to which PHY events should be dropped.

Signed-off-by: Gabriele Mazzotta 
Signed-off-by: Tejun Heo 
Signed-off-by: Zefan Li

nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()

2015-09-18T01:20:36+00:00

commit d8fd150fe3935e1692bf57c66691e17409ebb9c1 upstream.

The range check for b-tree level parameter in nilfs_btree_root_broken()
is wrong; it accepts the case of "level == NILFS_BTREE_LEVEL_MAX" even
though the level is limited to values in the range of 0 to
(NILFS_BTREE_LEVEL_MAX - 1).

Since the level parameter is read from storage device and used to index
nilfs_btree_path array whose element count is NILFS_BTREE_LEVEL_MAX, it
can cause memory overrun during btree operations if the boundary value
is set to the level parameter on device.

This fixes the broken sanity check and adds a comment to clarify that
the upper bound NILFS_BTREE_LEVEL_MAX is exclusive.

Signed-off-by: Ryusuke Konishi 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Zefan Li

jhash: Update jhash_[321]words functions to use correct initval

2015-09-18T01:20:27+00:00

commit 2e7056c433216f406b90a003aa0ba42e19d3bdcf upstream.

Looking over the implementation for jhash2 and comparing it to jhash_3words
I realized that the two hashes were in fact very different.  Doing a bit of
digging led me to "The new jhash implementation" in which lookup2 was
supposed to have been replaced with lookup3.

In reviewing the patch I noticed that jhash2 had originally initialized a
and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and
c were initialized to initval + (length << 2) + JHASH_INITVAL.  However the
changes in jhash_3words simply replaced the initialization of a and b with
JHASH_INITVAL.

This change corrects what I believe was an oversight so that a, b, and c in
jhash_3words all have the same value added consisting of initval + (length
<< 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the
same hash result given the same inputs.

Fixes: 60d509c823cca ("The new jhash implementation")
Signed-off-by: Alexander Duyck 
Signed-off-by: David S. Miller 
Signed-off-by: Zefan Li

PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev

2015-06-19T03:40:34+00:00

commit fc2798502f860b18f3c7121e4dc659d3d9d28d74 upstream.

These interfaces:

  pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region)

took a pci_dev, but they really depend only on the pci_bus.  And we want to
use them in resource allocation paths where we have the bus but not a
device, so this patch converts them to take the pci_bus instead of the
pci_dev:

  pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource)
  pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region)

In fact, with standard PCI-PCI bridges, they only depend on the host
bridge, because that's the only place address translation occurs, but
we aren't going that far yet.

[bhelgaas: changelog]
Signed-off-by: Yinghai Lu 
Signed-off-by: Bjorn Helgaas 
Cc: Dirk Behme 
[lizf: Backported to 3.4:
 - make changes to pci_host_bridge() instead of find_pci_root_bus()
 - adjust context]
Signed-off-by: Zefan Li

Defer processing of REQ_PREEMPT requests for blocked devices

2015-06-19T03:40:31+00:00

commit bba0bdd7ad4713d82338bcd9b72d57e9335a664b upstream.

SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:

BUG: unable to handle kernel paging request at ffffc9001a6bc084
IP: [] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
Call Trace:
 [] srp_post_send+0x65/0x70 [ib_srp]
 [] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
 [] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
 [] scsi_request_fn+0x411/0x4d0 [scsi_mod]
 [] __blk_run_queue+0x27/0x30
 [] blk_execute_rq_nowait+0x82/0x110
 [] blk_execute_rq+0x62/0xf0
 [] scsi_execute+0xe8/0x190 [scsi_mod]
 [] scsi_execute_req+0xa3/0x130 [scsi_mod]
 [] scsi_probe_lun+0x17a/0x450 [scsi_mod]
 [] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
 [] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
 [] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
 [] scsi_scan+0xdb/0xe0 [scsi_mod]
 [] store_scan+0x13/0x20 [scsi_mod]
 [] sysfs_write_file+0xcb/0x160
 [] vfs_write+0xce/0x140
 [] sys_write+0x53/0xa0
 [] system_call_fastpath+0x16/0x1b
 [<00007f611c9d9300>] 0x7f611c9d92ff

Reported-by: Max Gurtuvoy 
Signed-off-by: Bart Van Assche 
Reviewed-by: Mike Christie 
Signed-off-by: James Bottomley 
Signed-off-by: Zefan Li

fsnotify: fix handling of renames in audit

2015-06-19T03:40:14+00:00

commit 6ee8e25fc3e916193bce4ebb43d5439e1e2144ab upstream.

Commit e9fd702a58c4 ("audit: convert audit watches to use fsnotify
instead of inotify") broke handling of renames in audit.  Audit code
wants to update inode number of an inode corresponding to watched name
in a directory.  When something gets renamed into a directory to a
watched name, inotify previously passed moved inode to audit code
however new fsnotify code passes directory inode where the change
happened.  That confuses audit and it starts watching parent directory
instead of a file in a directory.

This can be observed for example by doing:

  cd /tmp
  touch foo bar
  auditctl -w /tmp/foo
  touch foo
  mv bar foo
  touch foo

In audit log we see events like:

  type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1
  ...
  type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE
  type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE
  ...

and that's it - we see event for the first touch after creating the
audit rule, we see events for rename but we don't see any event for the
last touch.  However we start seeing events for unrelated stuff
happening in /tmp.

Fix the problem by passing moved inode as data in the FS_MOVED_FROM and
FS_MOVED_TO events instead of the directory where the change happens.
This doesn't introduce any new problems because noone besides
audit_watch.c cares about the passed value:

  fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events.
  fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all.
  fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH.
  kernel/audit_tree.c doesn't care about passed 'data' at all.
  kernel/audit_watch.c expects moved inode as 'data'.

Fixes: e9fd702a58c49db ("audit: convert audit watches to use fsnotify instead of inotify")
Signed-off-by: Jan Kara 
Cc: Paul Moore 
Cc: Eric Paris 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Zefan Li