linux-stable.git/include/linux, branch v3.18.89

mm: Handle 0 flags in _calc_vm_trans() macro

2017-12-20T09:01:33+00:00

[ Upstream commit 592e254502041f953e84d091eae2c68cba04c10b ]

_calc_vm_trans() does not handle the situation when some of the passed
flags are 0 (which can happen if these VM flags do not make sense for
the architecture). Improve the _calc_vm_trans() macro to return 0 in
such situation. Since all passed flags are constant, this does not add
any runtime overhead.

Signed-off-by: Jan Kara 
Signed-off-by: Dan Williams 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

lib/genalloc.c: make the avail variable an atomic_long_t

2017-12-16T09:32:30+00:00

[ Upstream commit 36a3d1dd4e16bcd0d2ddfb4a2ec7092f0ae0d931 ]

If the amount of resources allocated to a gen_pool exceeds 2^32 then the
avail atomic overflows and this causes problems when clients try and
borrow resources from the pool.  This is only expected to be an issue on
64 bit systems.

Add the  header to pull in atomic_long* operations.  So
that 32 bit systems continue to use atomic32_t but 64 bit systems can
use atomic64_t.

Link: http://lkml.kernel.org/r/1509033843-25667-1-git-send-email-sbates@raithlin.com
Signed-off-by: Stephen Bates 
Reviewed-by: Logan Gunthorpe 
Reviewed-by: Mathieu Desnoyers 
Reviewed-by: Daniel Mentz 
Cc: Jonathan Corbet 
Cc: Andrew Morton 
Cc: Will Deacon 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

efi: Move some sysfs files to be read-only by root

2017-12-16T09:32:26+00:00

commit af97a77bc01ce49a466f9d4c0125479e2e2230b6 upstream.

Thanks to the scripts/leaking_addresses.pl script, it was found that
some EFI values should not be readable by non-root users.

So make them root-only, and to do that, add a __ATTR_RO_MODE() macro to
make this easier, and use it in other places at the same time.

Reported-by: Linus Torvalds 
Tested-by: Dave Young 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ard Biesheuvel 
Cc: H. Peter Anvin 
Cc: Matt Fleming 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20171206095010.24170-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

2017-12-09T17:29:47+00:00

[ Upstream commit 0911d0041c22922228ca52a977d7b0b0159fee4b ]

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return
code (GFS2 or Lustre can definitely do this).  However VM_FAULT_RETRY
from ->page_mkwrite is completely unhandled by the mm code and results
in locking and writeably mapping the page which definitely is not what
the caller wanted.

Fix Lustre and block_page_mkwrite_ret() used by other filesystems
(notably GFS2) to return VM_FAULT_NOPAGE instead which results in
bailing out from the fault code, the CPU then retries the access, and we
fault again effectively doing what the handler wanted.

Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz
Signed-off-by: Jan Kara 
Reported-by: Al Viro 
Reviewed-by: Jinshan Xiong 
Cc: Matthew Wilcox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

netlink: add a start callback for starting a netlink dump

2017-12-05T10:20:46+00:00

commit fc9e50f5a5a4e1fa9ba2756f745a13e693cf6a06 upstream.

The start callback allows the caller to set up a context for the
dump callbacks. Presumably, the context can then be destroyed in
the done callback.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller 
Cc: Guenter Roeck 
Signed-off-by: Greg Kroah-Hartman

netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed

2017-11-24T07:30:04+00:00

[ Upstream commit 2b5ec1a5f9738ee7bf8f5ec0526e75e00362c48f ]

When run ipvs in two different network namespace at the same host, and one
ipvs transport network traffic to the other network namespace ipvs.
'ipvs_property' flag will make the second ipvs take no effect. So we should
clear 'ipvs_property' when SKB network namespace changed.

Fixes: 621e84d6f373 ("dev: introduce skb_scrub_packet()")
Signed-off-by: Ye Yin 
Signed-off-by: Wei Zhou 
Signed-off-by: Julian Anastasov 
Signed-off-by: Simon Horman 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

tun: call dev_get_valid_name() before register_netdevice()

2017-11-18T10:06:30+00:00

[ Upstream commit 0ad646c81b2182f7fa67ec0c8c825e0ee165696d ]

register_netdevice() could fail early when we have an invalid
dev name, in which case ->ndo_uninit() is not called. For tun
device, this is a problem because a timer etc. are already
initialized and it expects ->ndo_uninit() to clean them up.

We could move these initializations into a ->ndo_init() so
that register_netdevice() knows better, however this is still
complicated due to the logic in tun_detach().

Therefore, I choose to just call dev_get_valid_name() before
register_netdevice(), which is quicker and much easier to audit.
And for this specific case, it is already enough.

Fixes: 96442e42429e ("tuntap: choose the txq based on rxq")
Reported-by: Dmitry Alexeev 
Cc: Jason Wang 
Cc: "Michael S. Tsirkin" 
Signed-off-by: Cong Wang 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

phy: increase size of MII_BUS_ID_SIZE and bus_id

2017-11-15T09:04:12+00:00

[ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ]

Some bus names are pretty long and do not fit into
17 chars. Increase therefore MII_BUS_ID_SIZE and
phy_fixup.bus_id to larger number. Now mii_bus.id
can host larger name.

Signed-off-by: Volodymyr Bendiuga 
Signed-off-by: Magnus Öberg 
Reviewed-by: Andrew Lunn 
Signed-off-by: David S. Miller 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

bus: mbus: fix window size calculation for 4GB windows

2017-10-27T08:17:23+00:00

commit 2bbbd96357ce76cc45ec722c00f654aa7b189112 upstream.

At least the Armada XP SoC supports 4GB on a single DRAM window. Because
the size register values contain the actual size - 1, the MSB is set in
that case. For example, the SDRAM window's control register's value is
0xffffffe1 for 4GB (bits 31 to 24 contain the size).

The MBUS driver reads back each window's size from registers and
calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which
overflows for 32 bit values, resulting in other miscalculations further
on (a bad RAM window for the CESA crypto engine calculated by
mvebu_mbus_setup_cpu_target_nooverlap() in my case).

This patch changes the type in 'struct mbus_dram_window' from u32 to
u64, which allows us to keep using the same register calculation code in
most MBUS-using drivers (which calculate ->size - 1 again).

Fixes: fddddb52a6c4 ("bus: introduce an Marvell EBU MBus driver")
Signed-off-by: Jan Luebbe 
Signed-off-by: Gregory CLEMENT 
Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T07:18:02+00:00

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream.

Since most of the SD ADCs have the option of reseting the serial
interface by sending a number of SCLKs with CS = 0 and DIN = 1,
a dedicated function that can do this is usefull.

Needed for the patch:  iio: ad7793: Fix the serial interface reset
Signed-off-by: Dragos Bogdan 
Acked-by: Lars-Peter Clausen 
Signed-off-by: Jonathan Cameron 
Signed-off-by: Greg Kroah-Hartman