linux-stable.git/include/linux, branch v3.18.71

cs5536: add support for IDE controller variant

2017-09-13T21:03:46+00:00

commit 591b6bb605785c12a21e8b07a08a277065b655a5 upstream.

Several legacy devices such as Geode-based Cisco ASA appliances
and DB800 development board do possess CS5536 IDE controller
with different PCI id than existing one. Using pata_generic is
not always feasible as at least DB800 requires MSR quirk from
pata_cs5536 to be used with vendor firmware.

Signed-off-by: Andrey Korolyov 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

workqueue: Fix flag collision

2017-09-13T21:03:46+00:00

commit fbf1c41fc0f4d3574ac2377245efd666c1fa3075 upstream.

Commit 0a94efb5acbb ("workqueue: implicit ordered attribute should be
overridable") introduced a __WQ_ORDERED_EXPLICIT flag but gave it the
same value as __WQ_LEGACY.  I don't believe these were intended to
mean the same thing, so renumber __WQ_ORDERED_EXPLICIT.

Fixes: 0a94efb5acbb ("workqueue: implicit ordered attribute should be ...")
Signed-off-by: Ben Hutchings 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

mm: cma: fix incorrect type conversion for size during dma allocation

2017-09-02T05:05:46+00:00

commit 67a2e213e7e937c41c52ab5bc46bf3f4de469f6e upstream.

This was found during userspace fuzzing test when a large size dma cma
allocation is made by driver(like ion) through userspace.

  show_stack+0x10/0x1c
  dump_stack+0x74/0xc8
  kasan_report_error+0x2b0/0x408
  kasan_report+0x34/0x40
  __asan_storeN+0x15c/0x168
  memset+0x20/0x44
  __dma_alloc_coherent+0x114/0x18c

Signed-off-by: Rohit Vaswani 
Acked-by: Greg Kroah-Hartman 
Cc: Marek Szyprowski 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Cc: Miles Chen 
Signed-off-by: Greg Kroah-Hartman

mm: cma: constify and use correct signness in mm/cma.c

2017-09-02T05:05:46+00:00

commit ac173824959adeb489f9fcf88858774c4535a241 upstream.

Constify function parameters and use correct signness where needed.

Signed-off-by: Sasha Levin 
Cc: Michal Nazarewicz 
Cc: Marek Szyprowski 
Cc: Joonsoo Kim 
Cc: Laurent Pinchart 
Acked-by: Gregory Fong 
Cc: Pintu Kumar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: cma: split cma-reserved in dmesg log

2017-09-02T05:05:46+00:00

commit e48322abb061d75096fe52d71886b237e7ae7bfb upstream.

When the system boots up, in the dmesg logs we can see the memory
statistics along with total reserved as below.  Memory: 458840k/458840k
available, 65448k reserved, 0K highmem

When CMA is enabled, still the total reserved memory remains the same.
However, the CMA memory is not considered as reserved.  But, when we see
/proc/meminfo, the CMA memory is part of free memory.  This creates
confusion.  This patch corrects the problem by properly subtracting the
CMA reserved memory from the total reserved memory in dmesg logs.

Below is the dmesg snapshot from an arm based device with 512MB RAM and
12MB single CMA region.

Before this change:
  Memory: 458840k/458840k available, 65448k reserved, 0K highmem

After this change:
  Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem

Signed-off-by: Pintu Kumar 
Signed-off-by: Vishnu Pratap Singh 
Acked-by: Michal Nazarewicz 
Cc: Rafael Aquini 
Cc: Jerome Marchand 
Cc: Marek Szyprowski 
Cc: Joonsoo Kim 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

lib: bitmap: add alignment offset for bitmap_find_next_zero_area()

2017-09-02T05:05:45+00:00

commit 5e19b013f55a884c59a14391b22138899d1cc4cc upstream.

Add a bitmap_find_next_zero_area_off() function which works like
bitmap_find_next_zero_area() function except it allows an offset to be
specified when alignment is checked.  This lets caller request a bit such
that its number plus the offset is aligned according to the mask.

[gregory.0xf0@gmail.com: Retrieved from https://patchwork.linuxtv.org/patch/6254/ and updated documentation]
Signed-off-by: Michal Nazarewicz 
Signed-off-by: Kyungmin Park 
Signed-off-by: Marek Szyprowski 
Signed-off-by: Gregory Fong 
Cc: Joonsoo Kim 
Cc: Kukjin Kim 
Cc: Laurent Pinchart 
Cc: Laura Abbott 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

pids: make task_tgid_nr_ns() safe

2017-08-25T00:00:10+00:00

commit dd1c1f2f2028a7b851f701fc6a8ebe39dcb95e7c upstream.

This was reported many times, and this was even mentioned in commit
52ee2dfdd4f5 ("pids: refactor vnr/nr_ns helpers to make them safe") but
somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is
not safe because task->group_leader points to nowhere after the exiting
task passes exit_notify(), rcu_read_lock() can not help.

We really need to change __unhash_process() to nullify group_leader,
parent, and real_parent, but this needs some cleanups.  Until then we
can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and
fix the problem.

Reported-by: Troy Kensinger 
Signed-off-by: Oleg Nesterov 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

workqueue: implicit ordered attribute should be overridable

2017-08-11T16:30:16+00:00

commit 0a94efb5acbb6980d7c9ab604372d93cd507e4d8 upstream.

5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be
ordered") automatically enabled ordered attribute for unbound
workqueues w/ max_active == 1.  Because ordered workqueues reject
max_active and some attribute changes, this implicit ordered mode
broke cases where the user creates an unbound workqueue w/ max_active
== 1 and later explicitly changes the related attributes.

This patch distinguishes explicit and implicit ordered setting and
overrides from attribute changes if implict.

Signed-off-by: Tejun Heo 
Fixes: 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
Cc: Holger Hoffstätte 
Signed-off-by: Greg Kroah-Hartman

signal: protect SIGNAL_UNKILLABLE from unintentional clearing.

2017-08-11T16:30:16+00:00

[ Upstream commit 2d39b3cd34e6d323720d4c61bd714f5ae202c022 ]

Since commit 00cd5c37afd5 ("ptrace: permit ptracing of /sbin/init") we
can now trace init processes.  init is initially protected with
SIGNAL_UNKILLABLE which will prevent fatal signals such as SIGSTOP, but
there are a number of paths during tracing where SIGNAL_UNKILLABLE can
be implicitly cleared.

This can result in init becoming stoppable/killable after tracing.  For
example, running:

  while true; do kill -STOP 1; done &
  strace -p 1

and then stopping strace and the kill loop will result in init being
left in state TASK_STOPPED.  Sending SIGCONT to init will resume it, but
init will now respond to future SIGSTOP signals rather than ignoring
them.

Make sure that when setting SIGNAL_STOP_CONTINUED/SIGNAL_STOP_STOPPED
that we don't clear SIGNAL_UNKILLABLE.

Link: http://lkml.kernel.org/r/20170104122017.25047-1-jamie.iles@oracle.com
Signed-off-by: Jamie Iles 
Acked-by: Oleg Nesterov 
Cc: Alexander Viro 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER

2017-08-11T16:30:16+00:00

[ Upstream commit bb1107f7c6052c863692a41f78c000db792334bf ]

Andrey Konovalov has reported the following warning triggered by the
syzkaller fuzzer.

  WARNING: CPU: 1 PID: 9935 at mm/page_alloc.c:3511 __alloc_pages_nodemask+0x159c/0x1e20
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 9935 Comm: syz-executor0 Not tainted 4.9.0-rc7+ #34
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Call Trace:
    __alloc_pages_slowpath mm/page_alloc.c:3511
    __alloc_pages_nodemask+0x159c/0x1e20 mm/page_alloc.c:3781
    alloc_pages_current+0x1c7/0x6b0 mm/mempolicy.c:2072
    alloc_pages include/linux/gfp.h:469
    kmalloc_order+0x1f/0x70 mm/slab_common.c:1015
    kmalloc_order_trace+0x1f/0x160 mm/slab_common.c:1026
    kmalloc_large include/linux/slab.h:422
    __kmalloc+0x210/0x2d0 mm/slub.c:3723
    kmalloc include/linux/slab.h:495
    ep_write_iter+0x167/0xb50 drivers/usb/gadget/legacy/inode.c:664
    new_sync_write fs/read_write.c:499
    __vfs_write+0x483/0x760 fs/read_write.c:512
    vfs_write+0x170/0x4e0 fs/read_write.c:560
    SYSC_write fs/read_write.c:607
    SyS_write+0xfb/0x230 fs/read_write.c:599
    entry_SYSCALL_64_fastpath+0x1f/0xc2

The issue is caused by a lack of size check for the request size in
ep_write_iter which should be fixed.  It, however, points to another
problem, that SLUB defines KMALLOC_MAX_SIZE too large because the its
KMALLOC_SHIFT_MAX is (MAX_ORDER + PAGE_SHIFT) which means that the
resulting page allocator request might be MAX_ORDER which is too large
(see __alloc_pages_slowpath).

The same applies to the SLOB allocator which allows even larger sizes.
Make sure that they are capped properly and never request more than
MAX_ORDER order.

Link: http://lkml.kernel.org/r/20161220130659.16461-2-mhocko@kernel.org
Signed-off-by: Michal Hocko 
Reported-by: Andrey Konovalov 
Acked-by: Christoph Lameter 
Cc: Alexei Starovoitov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman