linux-stable.git/include/linux, branch linux-3.19.y

ebpf: verifier: check that call reg with ARG_ANYTHING is initialized

2015-05-06T20:02:04+00:00

commit 80f1d68ccba70b1060c9c7360ca83da430f66bed upstream.

I noticed that a helper function with argument type ARG_ANYTHING does
not need to have an initialized value (register).

This can worst case lead to unintented stack memory leakage in future
helper functions if they are not carefully designed, or unintended
application behaviour in case the application developer was not careful
enough to match a correct helper function signature in the API.

The underlying issue is that ARG_ANYTHING should actually be split
into two different semantics:

  1) ARG_DONTCARE for function arguments that the helper function
     does not care about (in other words: the default for unused
     function arguments), and

  2) ARG_ANYTHING that is an argument actually being used by a
     helper function and *guaranteed* to be an initialized register.

The current risk is low: ARG_ANYTHING is only used for the 'flags'
argument (r4) in bpf_map_update_elem() that internally does strict
checking.

Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Daniel Borkmann 
Acked-by: Alexei Starovoitov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

usb: define a generic USB_RESUME_TIMEOUT macro

2015-05-06T20:01:49+00:00

commit 62f0342de1f012f3e90607d39e20fce811391169 upstream.

Every USB Host controller should use this new
macro to define for how long resume signalling
should be driven on the bus.

Currently, almost every single USB controller
is using a 20ms timeout for resume signalling.

That's problematic for two reasons:

a) sometimes that 20ms timer expires a little
before 20ms, which makes us fail certification

b) some (many) devices actually need more than
20ms resume signalling.

Sure, in case of (b) we can state that the device
is against the USB spec, but the fact is that
we have no control over which device the certification
lab will use. We also have no control over which host
they will use. Most likely they'll be using a Windows
PC which, again, we have no control over how that
USB stack is written and how long resume signalling
they are using.

At the end of the day, we must make sure Linux passes
electrical compliance when working as Host or as Device
and currently we don't pass compliance as host because
we're driving resume signallig for exactly 20ms and
that confuses certification test setup resulting in
Certification failure.

Acked-by: Greg Kroah-Hartman 
Acked-by: Peter Chen 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

net: fix crash in build_skb()

2015-05-06T20:01:38+00:00

[ Upstream commit 2ea2f62c8bda242433809c7f4e9eae1c52c40bbe ]

When I added pfmemalloc support in build_skb(), I forgot netlink
was using build_skb() with a vmalloc() area.

In this patch I introduce __build_skb() for netlink use,
and build_skb() is a wrapper handling both skb->head_frag and
skb->pfmemalloc

This means netlink no longer has to hack skb->head_frag

[ 1567.700067] kernel BUG at arch/x86/mm/physaddr.c:26!
[ 1567.700067] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1567.700067] Dumping ftrace buffer:
[ 1567.700067]    (ftrace buffer empty)
[ 1567.700067] Modules linked in:
[ 1567.700067] CPU: 9 PID: 16186 Comm: trinity-c182 Not tainted 4.0.0-next-20150424-sasha-00037-g4796e21 #2167
[ 1567.700067] task: ffff880127efb000 ti: ffff880246770000 task.ti: ffff880246770000
[ 1567.700067] RIP: __phys_addr (arch/x86/mm/physaddr.c:26 (discriminator 3))
[ 1567.700067] RSP: 0018:ffff8802467779d8  EFLAGS: 00010202
[ 1567.700067] RAX: 000041000ed8e000 RBX: ffffc9008ed8e000 RCX: 000000000000002c
[ 1567.700067] RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffffb3fd6049
[ 1567.700067] RBP: ffff8802467779f8 R08: 0000000000000019 R09: ffff8801d0168000
[ 1567.700067] R10: ffff8801d01680c7 R11: ffffed003a02d019 R12: ffffc9000ed8e000
[ 1567.700067] R13: 0000000000000f40 R14: 0000000000001180 R15: ffffc9000ed8e000
[ 1567.700067] FS:  00007f2a7da3f700(0000) GS:ffff8801d1000000(0000) knlGS:0000000000000000
[ 1567.700067] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1567.700067] CR2: 0000000000738308 CR3: 000000022e329000 CR4: 00000000000007e0
[ 1567.700067] Stack:
[ 1567.700067]  ffffc9000ed8e000 ffff8801d0168000 ffffc9000ed8e000 ffff8801d0168000
[ 1567.700067]  ffff880246777a28 ffffffffad7c0a21 0000000000001080 ffff880246777c08
[ 1567.700067]  ffff88060d302e68 ffff880246777b58 ffff880246777b88 ffffffffad9a6821
[ 1567.700067] Call Trace:
[ 1567.700067] build_skb (include/linux/mm.h:508 net/core/skbuff.c:316)
[ 1567.700067] netlink_sendmsg (net/netlink/af_netlink.c:1633 net/netlink/af_netlink.c:2329)
[ 1567.774369] ? sched_clock_cpu (kernel/sched/clock.c:311)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] ? netlink_unicast (net/netlink/af_netlink.c:2273)
[ 1567.774369] sock_sendmsg (net/socket.c:614 net/socket.c:623)
[ 1567.774369] sock_write_iter (net/socket.c:823)
[ 1567.774369] ? sock_sendmsg (net/socket.c:806)
[ 1567.774369] __vfs_write (fs/read_write.c:479 fs/read_write.c:491)
[ 1567.774369] ? get_lock_stats (kernel/locking/lockdep.c:249)
[ 1567.774369] ? default_llseek (fs/read_write.c:487)
[ 1567.774369] ? vtime_account_user (kernel/sched/cputime.c:701)
[ 1567.774369] ? rw_verify_area (fs/read_write.c:406 (discriminator 4))
[ 1567.774369] vfs_write (fs/read_write.c:539)
[ 1567.774369] SyS_write (fs/read_write.c:586 fs/read_write.c:577)
[ 1567.774369] ? SyS_read (fs/read_write.c:577)
[ 1567.774369] ? __this_cpu_preempt_check (lib/smp_processor_id.c:63)
[ 1567.774369] ? trace_hardirqs_on_caller (kernel/locking/lockdep.c:2594 kernel/locking/lockdep.c:2636)
[ 1567.774369] ? trace_hardirqs_on_thunk (arch/x86/lib/thunk_64.S:42)
[ 1567.774369] system_call_fastpath (arch/x86/kernel/entry_64.S:261)

Fixes: 79930f5892e ("net: do not deplete pfmemalloc reserve")
Signed-off-by: Eric Dumazet 
Reported-by: Sasha Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: add skb_checksum_complete_unset

2015-05-06T20:01:38+00:00

[ Upstream commit 4e18b9adf2f910ec4d30b811a74a5b626e6c6125 ]

This function changes ip_summed to CHECKSUM_NONE if CHECKSUM_COMPLETE
is set. This is called to discard checksum-complete when packet
is being modified and checksum is not pulled for headers in a layer.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: take page table lock in follow_huge_pmd()

2015-04-29T08:23:47+00:00

commit e66f17ff71772b209eed39de35aaa99ba819c93d upstream.

We have a race condition between move_pages() and freeing hugepages, where
move_pages() calls follow_page(FOLL_GET) for hugepages internally and
tries to get its refcount without preventing concurrent freeing.  This
race crashes the kernel, so this patch fixes it by moving FOLL_GET code
for hugepages into follow_huge_pmd() with taking the page table lock.

This patch intentionally removes page==NULL check after pte_page.
This is justified because pte_page() never returns NULL for any
architectures or configurations.

This patch changes the behavior of follow_huge_pmd() for tail pages and
then tail pages can be pinned/returned.  So the caller must be changed to
properly handle the returned tail pages.

We could have a choice to add the similar locking to
follow_huge_(addr|pud) for consistency, but it's not necessary because
currently these functions don't support FOLL_GET flag, so let's leave it
for future development.

Here is the reproducer:

  $ cat movepages.c
  #include 
  #include 
  #include 

  #define ADDR_INPUT      0x700000000000UL
  #define HPS             0x200000
  #define PS              0x1000

  int main(int argc, char *argv[]) {
          int i;
          int nr_hp = strtol(argv[1], NULL, 0);
          int nr_p  = nr_hp * HPS / PS;
          int ret;
          void **addrs;
          int *status;
          int *nodes;
          pid_t pid;

          pid = strtol(argv[2], NULL, 0);
          addrs  = malloc(sizeof(char *) * nr_p + 1);
          status = malloc(sizeof(char *) * nr_p + 1);
          nodes  = malloc(sizeof(char *) * nr_p + 1);

          while (1) {
                  for (i = 0; i < nr_p; i++) {
                          addrs[i] = (void *)ADDR_INPUT + i * PS;
                          nodes[i] = 1;
                          status[i] = 0;
                  }
                  ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
                                        MPOL_MF_MOVE_ALL);
                  if (ret == -1)
                          err("move_pages");

                  for (i = 0; i < nr_p; i++) {
                          addrs[i] = (void *)ADDR_INPUT + i * PS;
                          nodes[i] = 0;
                          status[i] = 0;
                  }
                  ret = numa_move_pages(pid, nr_p, addrs, nodes, status,
                                        MPOL_MF_MOVE_ALL);
                  if (ret == -1)
                          err("move_pages");
          }
          return 0;
  }

  $ cat hugepage.c
  #include 
  #include 
  #include 

  #define ADDR_INPUT      0x700000000000UL
  #define HPS             0x200000

  int main(int argc, char *argv[]) {
          int nr_hp = strtol(argv[1], NULL, 0);
          char *p;

          while (1) {
                  p = mmap((void *)ADDR_INPUT, nr_hp * HPS, PROT_READ | PROT_WRITE,
                           MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
                  if (p != (void *)ADDR_INPUT) {
                          perror("mmap");
                          break;
                  }
                  memset(p, 0, nr_hp * HPS);
                  munmap(p, nr_hp * HPS);
          }
  }

  $ sysctl vm.nr_hugepages=40
  $ ./hugepage 10 &
  $ ./movepages 10 $(pgrep -f hugepage)


[n-horiguchi@ah.jp.nec.com: resolve conflict to apply to v3.19.1]
Fixes: e632a938d914 ("mm: migrate: add hugepage migration code to move_pages()")
Signed-off-by: Naoya Horiguchi 
Reported-by: Hugh Dickins 
Cc: James Hogan 
Cc: David Rientjes 
Cc: Mel Gorman 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: Rik van Riel 
Cc: Andrea Arcangeli 
Cc: Luiz Capitulino 
Cc: Nishanth Aravamudan 
Cc: Lee Schermerhorn 
Cc: Steve Capper 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

usbnet: Fix tx_bytes statistic running backward in cdc_ncm

2015-04-29T08:23:44+00:00

[ Upstream commit 7a1e890e2168e33fb62d84528e996b8b4b478fea ]

cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path.  But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space.  Also, tx_bytes is only incremented by usbnet in the
completion path.

Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.

Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings 
Signed-off-by: Bjørn Mork 
Signed-off-by: Greg Kroah-Hartman

usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME drivers

2015-04-29T08:23:44+00:00

[ Upstream commit 1e9e39f4a29857a396ac7b669d109f697f66695e ]

Currently the usbnet core does not update the tx_packets statistic for
drivers with FLAG_MULTI_PACKET and there is no hook in the TX
completion path where they could do this.

cdc_ncm and dependent drivers are bumping tx_packets stat on the
transmit path while asix and sr9800 aren't updating it at all.

Add a packet count in struct skb_data so these drivers can fill it
in, initialise it to 1 for other drivers, and add the packet count
to the tx_packets statistic on completion.

Signed-off-by: Ben Hutchings 
Tested-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ipv6: protect skb->sk accesses from recursive dereference inside the stack

2015-04-29T08:23:42+00:00

[ Upstream commit f60e5990d9c1424af9dbca60a23ba2a1c7c1ce90 ]

We should not consult skb->sk for output decisions in xmit recursion
levels > 0 in the stack. Otherwise local socket settings could influence
the result of e.g. tunnel encapsulation process.

ipv6 does not conform with this in three places:

1) ip6_fragment: we do consult ipv6_npinfo for frag_size

2) sk_mc_loop in ipv6 uses skb->sk and checks if we should
   loop the packet back to the local socket

3) ip6_skb_dst_mtu could query the settings from the user socket and
   force a wrong MTU

Furthermore:
In sk_mc_loop we could potentially land in WARN_ON(1) if we use a
PF_PACKET socket ontop of an IPv6-backed vxlan device.

Reuse xmit_recursion as we are currently only interested in protecting
tunnel devices.

Cc: Jiri Pirko 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

cpuidle: remove state_count field from struct cpuidle_device

2015-04-19T08:10:21+00:00

commit d75e4af14e228bbe3f86e29bcecb8e6be98d4e04 upstream.

Thomas Schlichter reports the following issue on his Samsung NC20:

"The C-states C1 and C2 to the OS when connected to AC, and additionally
 provides the C3 C-state when disconnected from AC.  However, the number
 of C-states shown in sysfs is fixed to the number of C-states present
 at boot.
   If I boot with AC connected, I always only see the C-states up to C2
   even if I disconnect AC.

   The reason is commit 130a5f692425 (ACPI / cpuidle: remove dev->state_count
   setting).  It removes the update of dev->state_count, but sysfs uses
   exactly this variable to show the C-states.

   The fix is to use drv->state_count in sysfs.  As this is currently the
   last user of dev->state_count, this variable can be completely removed."

Remove dev->state_count as per the above.

Reported-by: Thomas Schlichter 
Signed-off-by: Bartlomiej Zolnierkiewicz 
Signed-off-by: Kyungmin Park 
Acked-by: Daniel Lezcano 
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

Defer processing of REQ_PREEMPT requests for blocked devices

2015-04-19T08:10:19+00:00

commit bba0bdd7ad4713d82338bcd9b72d57e9335a664b upstream.

SCSI transport drivers and SCSI LLDs block a SCSI device if the
transport layer is not operational. This means that in this state
no requests should be processed, even if the REQ_PREEMPT flag has
been set. This patch avoids that a rescan shortly after a cable
pull sporadically triggers the following kernel oops:

BUG: unable to handle kernel paging request at ffffc9001a6bc084
IP: [] mlx4_ib_post_send+0xd2/0xb30 [mlx4_ib]
Process rescan-scsi-bus (pid: 9241, threadinfo ffff88053484a000, task ffff880534aae100)
Call Trace:
 [] srp_post_send+0x65/0x70 [ib_srp]
 [] srp_queuecommand+0x1cf/0x3e0 [ib_srp]
 [] scsi_dispatch_cmd+0x101/0x280 [scsi_mod]
 [] scsi_request_fn+0x411/0x4d0 [scsi_mod]
 [] __blk_run_queue+0x27/0x30
 [] blk_execute_rq_nowait+0x82/0x110
 [] blk_execute_rq+0x62/0xf0
 [] scsi_execute+0xe8/0x190 [scsi_mod]
 [] scsi_execute_req+0xa3/0x130 [scsi_mod]
 [] scsi_probe_lun+0x17a/0x450 [scsi_mod]
 [] scsi_probe_and_add_lun+0x156/0x480 [scsi_mod]
 [] __scsi_scan_target+0xdf/0x1f0 [scsi_mod]
 [] scsi_scan_host_selected+0x183/0x1c0 [scsi_mod]
 [] scsi_scan+0xdb/0xe0 [scsi_mod]
 [] store_scan+0x13/0x20 [scsi_mod]
 [] sysfs_write_file+0xcb/0x160
 [] vfs_write+0xce/0x140
 [] sys_write+0x53/0xa0
 [] system_call_fastpath+0x16/0x1b
 [<00007f611c9d9300>] 0x7f611c9d92ff

Reported-by: Max Gurtuvoy 
Signed-off-by: Bart Van Assche 
Reviewed-by: Mike Christie 
Signed-off-by: James Bottomley 
Signed-off-by: Greg Kroah-Hartman