linux-stable.git/include/linux, branch linux-3.12.y Linux kernel stable tree ACPI / PNP: Reserve ACPI resources at the fs_initcall_sync stage 2017-04-11T06:04:33+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2015-07-04T01:09:03+00:00 042cde428837482efa80660fee45e18b01249472 commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream. This effectively reverts the following three commits: 7bc10388ccdd ACPI / resources: free memory on error in add_region_before() 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources() (commit b9a5e5e18fbf introduced regressions some of which, but not all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd was a fixup on top of the latter) and causes ACPI fixed hardware resources to be reserved at the fs_initcall_sync stage of system initialization. The story is as follows. First, a boot regression was reported due to an apparent resource reservation ordering change after a commit that shouldn't lead to such changes. Investigation led to the conclusion that the problem happened because acpi_reserve_resources() was executed at the device_initcall() stage of system initialization which wasn't strictly ordered with respect to driver initialization (and with respect to the initialization of the pcieport driver in particular), so a random change causing the device initcalls to be run in a different order might break things. The response to that was to attempt to run acpi_reserve_resources() as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf). However, that turned out to be too early, because it caused resource reservations made by the PNP system driver to fail on at least one system and that failure was addressed by commit 0f1b414d1907. That fix still turned out to be insufficient, though, because calling acpi_reserve_resources() before the fs_initcall stage of system initialization caused a boot regression to happen on the eCAFE EC-800-H20G/S netbook. That meant that we only could call acpi_reserve_resources() at the fs_initcall initialization stage or later, but then we might just as well call it after the PNP initalization in which case commit 0f1b414d1907 wouldn't be necessary any more. For this reason, the changes made by commit 0f1b414d1907 are reverted (along with a memory leak fixup on top of that commit), the changes made by commit b9a5e5e18fbf that went too far are reverted too and acpi_reserve_resources() is changed into fs_initcall_sync, which will cause it to be executed after the PNP subsystem initialization (which is an fs_initcall) and before device initcalls (including the pcieport driver initialization) which should avoid the initial issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581 Link: http://marc.info/?t=143092384600002&r=1&w=2 Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 0294112ee3135fbd15eaa70015af8283642dd970 upstream.

This effectively reverts the following three commits:

 7bc10388ccdd ACPI / resources: free memory on error in add_region_before()
 0f1b414d1907 ACPI / PNP: Avoid conflicting resource reservations
 b9a5e5e18fbf ACPI / init: Fix the ordering of acpi_reserve_resources()

(commit b9a5e5e18fbf introduced regressions some of which, but not
all, were addressed by commit 0f1b414d1907 and commit 7bc10388ccdd
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.

The story is as follows.  First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes.  Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.

The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18fbf).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d1907.

That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook.  That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d1907 wouldn't be
necessary any more.

For this reason, the changes made by commit 0f1b414d1907 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18fbf that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&r=1&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
ACPI / PNP: Avoid conflicting resource reservations 2017-04-11T06:04:31+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2015-06-18T16:32:02+00:00 543cacc7dbdba02e8f73c221606d16f4ceb55079 commit 0f1b414d190724617eb1cdd615592fa8cd9d0b50 upstream. Commit b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" overlooked the fact that the memory and/or I/O regions reserved by acpi_reserve_resources() may conflict with those reserved by the PNP "system" driver. If that conflict actually takes place, it causes the reservations made by the "system" driver to fail while before commit b9a5e5e18fbf all reservations made by it and by acpi_reserve_resources() would be successful. In turn, that allows the resources that haven't been reserved by the "system" driver to be used by others (e.g. PCI) which sometimes leads to functional problems (up to and including boot failures). To fix that issue, introduce a common resource reservation routine, acpi_reserve_region(), to be used by both acpi_reserve_resources() and the "system" driver, that will track all resources reserved by it and avoid making conflicting requests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831 Link: http://marc.info/?t=143389402600001&r=1&w=2 Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()" Reported-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 0f1b414d190724617eb1cdd615592fa8cd9d0b50 upstream.

Commit b9a5e5e18fbf "ACPI / init: Fix the ordering of
acpi_reserve_resources()" overlooked the fact that the memory
and/or I/O regions reserved by acpi_reserve_resources() may
conflict with those reserved by the PNP "system" driver.

If that conflict actually takes place, it causes the reservations
made by the "system" driver to fail while before commit b9a5e5e18fbf
all reservations made by it and by acpi_reserve_resources() would be
successful.  In turn, that allows the resources that haven't been
reserved by the "system" driver to be used by others (e.g. PCI) which
sometimes leads to functional problems (up to and including boot
failures).

To fix that issue, introduce a common resource reservation routine,
acpi_reserve_region(), to be used by both acpi_reserve_resources()
and the "system" driver, that will track all resources reserved by
it and avoid making conflicting requests.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18fbf "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
KVM: kvm_io_bus_unregister_dev() should never fail 2017-04-10T13:09:47+00:00 David Hildenbrand david@redhat.com 2017-03-23T17:24:19+00:00 a517ec56d0e201f8cb10913ce00b06df4d8a368a commit 90db10434b163e46da413d34db8d0e77404cc645 upstream. No caller currently checks the return value of kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on freeing their device. A stale reference will remain in the io_bus, getting at least used again, when the iobus gets teared down on kvm_destroy_vm() - leading to use after free errors. There is nothing the callers could do, except retrying over and over again. So let's simply remove the bus altogether, print an error and make sure no one can access this broken bus again (returning -ENOMEM on any attempt to access it). Fixes: e93f8a0f821e ("KVM: convert io_bus to SRCU") Reported-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 90db10434b163e46da413d34db8d0e77404cc645 upstream.

No caller currently checks the return value of
kvm_io_bus_unregister_dev(). This is evil, as all callers silently go on
freeing their device. A stale reference will remain in the io_bus,
getting at least used again, when the iobus gets teared down on
kvm_destroy_vm() - leading to use after free errors.

There is nothing the callers could do, except retrying over and over
again.

So let's simply remove the bus altogether, print an error and make
sure no one can access this broken bus again (returning -ENOMEM on any
attempt to access it).

Fixes: e93f8a0f821e ("KVM: convert io_bus to SRCU")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk 2017-04-07T08:38:25+00:00 Samuel Thibault samuel.thibault@ens-lyon.org 2017-03-13T19:50:08+00:00 1f3fa7c0617ef1136efc9ecec4f404a1f351a341 commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream. Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream.

Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.

The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms.  It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies.  The generic config code does not
catch this case because the 64ms is considered a sane enough value.

This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.

Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
give up on gcc ilog2() constant optimizations 2017-03-28T13:49:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-03-02T20:17:22+00:00 44fd5d00c835f410ee76880006aad568fdc07246 commit 474c90156c8dcc2fa815e6716cc9394d7930cb9c upstream. gcc-7 has an "optimization" pass that completely screws up, and generates the code expansion for the (impossible) case of calling ilog2() with a zero constant, even when the code gcc compiles does not actually have a zero constant. And we try to generate a compile-time error for anybody doing ilog2() on a constant where that doesn't make sense (be it zero or negative). So now gcc7 will fail the build due to our sanity checking, because it created that constant-zero case that didn't actually exist in the source code. There's a whole long discussion on the kernel mailing about how to work around this gcc bug. The gcc people themselevs have discussed their "feature" in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785 but it's all water under the bridge, because while it looked at one point like it would be solved by the time gcc7 was released, that was not to be. So now we have to deal with this compiler braindamage. And the only simple approach seems to be to just delete the code that tries to warn about bad uses of ilog2(). So now "ilog2()" will just return 0 not just for the value 1, but for any non-positive value too. It's not like I can recall anybody having ever actually tried to use this function on any invalid value, but maybe the sanity check just meant that such code never made it out in public. [js] no tools/include/linux/log2.h copy of that yet Reported-by: Laura Abbott <labbott@redhat.com> Cc: John Stultz <john.stultz@linaro.org>, Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 474c90156c8dcc2fa815e6716cc9394d7930cb9c upstream.

gcc-7 has an "optimization" pass that completely screws up, and
generates the code expansion for the (impossible) case of calling
ilog2() with a zero constant, even when the code gcc compiles does not
actually have a zero constant.

And we try to generate a compile-time error for anybody doing ilog2() on
a constant where that doesn't make sense (be it zero or negative).  So
now gcc7 will fail the build due to our sanity checking, because it
created that constant-zero case that didn't actually exist in the source
code.

There's a whole long discussion on the kernel mailing about how to work
around this gcc bug.  The gcc people themselevs have discussed their
"feature" in

   https://gcc.gnu.org/bugzilla/show_bug.cgi?id=72785

but it's all water under the bridge, because while it looked at one
point like it would be solved by the time gcc7 was released, that was
not to be.

So now we have to deal with this compiler braindamage.

And the only simple approach seems to be to just delete the code that
tries to warn about bad uses of ilog2().

So now "ilog2()" will just return 0 not just for the value 1, but for
any non-positive value too.

It's not like I can recall anybody having ever actually tried to use
this function on any invalid value, but maybe the sanity check just
meant that such code never made it out in public.

[js] no tools/include/linux/log2.h copy of that yet

Reported-by: Laura Abbott <labbott@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>,
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
locking/static_keys: Add static_key_{en,dis}able() helpers 2017-03-28T13:49:18+00:00 Peter Zijlstra peterz@infradead.org 2015-07-24T13:03:40+00:00 7511dee587205498e3d71234ee89ce9c81ae17e9 commit e33886b38cc82a9fc3b2d655dfc7f50467594138 upstream. Add two helpers to make it easier to treat the refcount as boolean. [js] do not involve WARN_ON_ONCE as it causes build failures Suggested-by: Jason Baron <jasonbaron0@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit e33886b38cc82a9fc3b2d655dfc7f50467594138 upstream.

Add two helpers to make it easier to treat the refcount as boolean.

[js] do not involve WARN_ON_ONCE as it causes build failures

Suggested-by: Jason Baron <jasonbaron0@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
nlm: Ensure callback code also checks that the files match 2017-03-13T20:40:48+00:00 Trond Myklebust trond.myklebust@primarydata.com 2017-02-11T15:37:38+00:00 db93e51d674ee33fad1f3210cf41997ffccd5fb4 commit 251af29c320d86071664f02c76f0d063a19fefdf upstream. It is not sufficient to just check that the lock pids match when granting a callback, we also need to ensure that we're granting the callback on the right file. Reported-by: Pankaj Singh <psingh.ait@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 251af29c320d86071664f02c76f0d063a19fefdf upstream.

It is not sufficient to just check that the lock pids match when
granting a callback, we also need to ensure that we're granting
the callback on the right file.

Reported-by: Pankaj Singh <psingh.ait@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
can: Fix kernel panic at security_sock_rcv_skb 2017-03-01T08:59:46+00:00 Eric Dumazet edumazet@google.com 2017-01-27T16:11:44+00:00 d900adb41aa0f6cc03c217950ee0655c137997bd [ Upstream commit f1712c73714088a7252d276a57126d56c7d37e64 ] Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
[ Upstream commit f1712c73714088a7252d276a57126d56c7d37e64 ]

Zhang Yanmin reported crashes [1] and provided a patch adding a
synchronize_rcu() call in can_rx_unregister()

The main problem seems that the sockets themselves are not RCU
protected.

If CAN uses RCU for delivery, then sockets should be freed only after
one RCU grace period.

Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's
ease stable backports with the following fix instead.

[1]
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0

Call Trace:
 <IRQ>
 [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60
 [<ffffffff81d55771>] sk_filter+0x41/0x210
 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0
 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0
 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370
 [<ffffffff81f07af9>] can_receive+0xd9/0x120
 [<ffffffff81f07beb>] can_rcv+0xab/0x100
 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0
 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0
 [<ffffffff81d37f67>] process_backlog+0x127/0x280
 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0
 [<ffffffff810c88d4>] __do_softirq+0x184/0x440
 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30
 <EOI>
 [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40
 [<ffffffff810c8bed>] do_softirq+0x1d/0x20
 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110
 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520
 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230
 [<ffffffff810e3baf>] process_one_work+0x24f/0x670
 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0
 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480
 [<ffffffff810ebafc>] kthread+0x12c/0x150
 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70

Reported-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
SUNRPC: cleanup ida information when removing sunrpc module 2017-02-15T10:56:08+00:00 Kinglong Mee kinglongmee@gmail.com 2017-01-20T08:48:39+00:00 9afd28b10f904129136609cab1310b82cd083555 commit c929ea0b910355e1876c64431f3d5802f95b3d75 upstream. After removing sunrpc module, I get many kmemleak information as, unreferenced object 0xffff88003316b1e0 (size 544): comm "gssproxy", pid 2148, jiffies 4294794465 (age 4200.081s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffb0cfb58a>] kmemleak_alloc+0x4a/0xa0 [<ffffffffb03507fe>] kmem_cache_alloc+0x15e/0x1f0 [<ffffffffb0639baa>] ida_pre_get+0xaa/0x150 [<ffffffffb0639cfd>] ida_simple_get+0xad/0x180 [<ffffffffc06054fb>] nlmsvc_lookup_host+0x4ab/0x7f0 [lockd] [<ffffffffc0605e1d>] lockd+0x4d/0x270 [lockd] [<ffffffffc06061e5>] param_set_timeout+0x55/0x100 [lockd] [<ffffffffc06cba24>] svc_defer+0x114/0x3f0 [sunrpc] [<ffffffffc06cbbe7>] svc_defer+0x2d7/0x3f0 [sunrpc] [<ffffffffc06c71da>] rpc_show_info+0x8a/0x110 [sunrpc] [<ffffffffb044a33f>] proc_reg_write+0x7f/0xc0 [<ffffffffb038e41f>] __vfs_write+0xdf/0x3c0 [<ffffffffb0390f1f>] vfs_write+0xef/0x240 [<ffffffffb0392fbd>] SyS_write+0xad/0x130 [<ffffffffb0d06c37>] entry_SYSCALL_64_fastpath+0x1a/0xa9 [<ffffffffffffffff>] 0xffffffffffffffff I found, the ida information (dynamic memory) isn't cleanup. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Fixes: 2f048db4680a ("SUNRPC: Add an identifier for struct rpc_clnt") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit c929ea0b910355e1876c64431f3d5802f95b3d75 upstream.

After removing sunrpc module, I get many kmemleak information as,
unreferenced object 0xffff88003316b1e0 (size 544):
  comm "gssproxy", pid 2148, jiffies 4294794465 (age 4200.081s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffffb0cfb58a>] kmemleak_alloc+0x4a/0xa0
    [<ffffffffb03507fe>] kmem_cache_alloc+0x15e/0x1f0
    [<ffffffffb0639baa>] ida_pre_get+0xaa/0x150
    [<ffffffffb0639cfd>] ida_simple_get+0xad/0x180
    [<ffffffffc06054fb>] nlmsvc_lookup_host+0x4ab/0x7f0 [lockd]
    [<ffffffffc0605e1d>] lockd+0x4d/0x270 [lockd]
    [<ffffffffc06061e5>] param_set_timeout+0x55/0x100 [lockd]
    [<ffffffffc06cba24>] svc_defer+0x114/0x3f0 [sunrpc]
    [<ffffffffc06cbbe7>] svc_defer+0x2d7/0x3f0 [sunrpc]
    [<ffffffffc06c71da>] rpc_show_info+0x8a/0x110 [sunrpc]
    [<ffffffffb044a33f>] proc_reg_write+0x7f/0xc0
    [<ffffffffb038e41f>] __vfs_write+0xdf/0x3c0
    [<ffffffffb0390f1f>] vfs_write+0xef/0x240
    [<ffffffffb0392fbd>] SyS_write+0xad/0x130
    [<ffffffffb0d06c37>] entry_SYSCALL_64_fastpath+0x1a/0xa9
    [<ffffffffffffffff>] 0xffffffffffffffff

I found, the ida information (dynamic memory) isn't cleanup.

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 2f048db4680a ("SUNRPC: Add an identifier for struct rpc_clnt")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
nfs: Don't increment lock sequence ID after NFS4ERR_MOVED 2017-02-15T10:56:08+00:00 Chuck Lever chuck.lever@oracle.com 2017-01-22T19:04:29+00:00 9e69a51c9bebd9bf991eed4429635c75da196947 commit 059aa734824165507c65fd30a55ff000afd14983 upstream. Xuan Qi reports that the Linux NFSv4 client failed to lock a file that was migrated. The steps he observed on the wire: 1. The client sent a LOCK request to the source server 2. The source server replied NFS4ERR_MOVED 3. The client switched to the destination server 4. The client sent the same LOCK request to the destination server with a bumped lock sequence ID 5. The destination server rejected the LOCK request with NFS4ERR_BAD_SEQID RFC 3530 section 8.1.5 provides a list of NFS errors which do not bump a lock sequence ID. However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section 9.1.7, this list has been updated by the addition of NFS4ERR_MOVED. Reported-by: Xuan Qi <xuan.qi@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> 
commit 059aa734824165507c65fd30a55ff000afd14983 upstream.

Xuan Qi reports that the Linux NFSv4 client failed to lock a file
that was migrated. The steps he observed on the wire:

1. The client sent a LOCK request to the source server
2. The source server replied NFS4ERR_MOVED
3. The client switched to the destination server
4. The client sent the same LOCK request to the destination
   server with a bumped lock sequence ID
5. The destination server rejected the LOCK request with
   NFS4ERR_BAD_SEQID

RFC 3530 section 8.1.5 provides a list of NFS errors which do not
bump a lock sequence ID.

However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section
9.1.7, this list has been updated by the addition of NFS4ERR_MOVED.

Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>