linux-stable.git/include/linux/vm_event_item.h, branch v4.5.3

mm: support madvise(MADV_FREE)

2016-01-16T01:56:32+00:00

Linux doesn't have an ability to free pages lazy while other OS already
have been supported that named by madvise(MADV_FREE).

The gain is clear that kernel can discard freed pages rather than
swapping out or OOM if memory pressure happens.

Without memory pressure, freed pages would be reused by userspace
without another additional overhead(ex, page fault + allocation +
zeroing).

Jason Evans said:

: Facebook has been using MAP_UNINITIALIZED
: (https://lkml.org/lkml/2012/1/18/308) in some of its applications for
: several years, but there are operational costs to maintaining this
: out-of-tree in our kernel and in jemalloc, and we are anxious to retire it
: in favor of MADV_FREE.  When we first enabled MAP_UNINITIALIZED it
: increased throughput for much of our workload by ~5%, and although the
: benefit has decreased using newer hardware and kernels, there is still
: enough benefit that we cannot reasonably retire it without a replacement.
:
: Aside from Facebook operations, there are numerous broadly used
: applications that would benefit from MADV_FREE.  The ones that immediately
: come to mind are redis, varnish, and MariaDB.  I don't have much insight
: into Android internals and development process, but I would hope to see
: MADV_FREE support eventually end up there as well to benefit applications
: linked with the integrated jemalloc.
:
: jemalloc will use MADV_FREE once it becomes available in the Linux kernel.
: In fact, jemalloc already uses MADV_FREE or equivalent everywhere it's
: available: *BSD, OS X, Windows, and Solaris -- every platform except Linux
: (and AIX, but I'm not sure it even compiles on AIX).  The lack of
: MADV_FREE on Linux forced me down a long series of increasingly
: sophisticated heuristics for madvise() volume reduction, and even so this
: remains a common performance issue for people using jemalloc on Linux.
: Please integrate MADV_FREE; many people will benefit substantially.

How it works:

When madvise syscall is called, VM clears dirty bit of ptes of the
range.  If memory pressure happens, VM checks dirty bit of page table
and if it found still "clean", it means it's a "lazyfree pages" so VM
could discard the page instead of swapping out.  Once there was store
operation for the page before VM peek a page to reclaim, dirty bit is
set so VM can swap out the page instead of discarding.

One thing we should notice is that basically, MADV_FREE relies on dirty
bit in page table entry to decide whether VM allows to discard the page
or not.  IOW, if page table entry includes marked dirty bit, VM
shouldn't discard the page.

However, as a example, if swap-in by read fault happens, page table
entry doesn't have dirty bit so MADV_FREE could discard the page
wrongly.

For avoiding the problem, MADV_FREE did more checks with PageDirty and
PageSwapCache.  It worked out because swapped-in page lives on swap
cache and since it is evicted from the swap cache, the page has PG_dirty
flag.  So both page flags check effectively prevent wrong discarding by
MADV_FREE.

However, a problem in above logic is that swapped-in page has PG_dirty
still after they are removed from swap cache so VM cannot consider the
page as freeable any more even if madvise_free is called in future.

Look at below example for detail.

    ptr = malloc();
    memset(ptr);
    ..
    ..
    .. heavy memory pressure so all of pages are swapped out
    ..
    ..
    var = *ptr; -> a page swapped-in and could be removed from
                   swapcache. Then, page table doesn't mark
                   dirty bit and page descriptor includes PG_dirty
    ..
    ..
    madvise_free(ptr); -> It doesn't clear PG_dirty of the page.
    ..
    ..
    ..
    .. heavy memory pressure again.
    .. In this time, VM cannot discard the page because the page
    .. has *PG_dirty*

To solve the problem, this patch clears PG_dirty if only the page is
owned exclusively by current process when madvise is called because
PG_dirty represents ptes's dirtiness in several processes so we could
clear it only if we own it exclusively.

Firstly, heavy users would be general allocators(ex, jemalloc, tcmalloc
and hope glibc supports it) and jemalloc/tcmalloc already have supported
the feature for other OS(ex, FreeBSD)

  barrios@blaptop:~/benchmark/ebizzy$ lscpu
  Architecture:          x86_64
  CPU op-mode(s):        32-bit, 64-bit
  Byte Order:            Little Endian
  CPU(s):                12
  On-line CPU(s) list:   0-11
  Thread(s) per core:    1
  Core(s) per socket:    1
  Socket(s):             12
  NUMA node(s):          1
  Vendor ID:             GenuineIntel
  CPU family:            6
  Model:                 2
  Stepping:              3
  CPU MHz:               3200.185
  BogoMIPS:              6400.53
  Virtualization:        VT-x
  Hypervisor vendor:     KVM
  Virtualization type:   full
  L1d cache:             32K
  L1i cache:             32K
  L2 cache:              4096K
  NUMA node0 CPU(s):     0-11
  ebizzy benchmark(./ebizzy -S 10 -n 512)

  Higher avg is better.

   vanilla-jemalloc             MADV_free-jemalloc

  1 thread
  records: 10                   records: 10
  avg:   2961.90                avg:  12069.70
  std:     71.96(2.43%)         std:    186.68(1.55%)
  max:   3070.00                max:  12385.00
  min:   2796.00                min:  11746.00

  2 thread
  records: 10                   records: 10
  avg:   5020.00                avg:  17827.00
  std:    264.87(5.28%)         std:    358.52(2.01%)
  max:   5244.00                max:  18760.00
  min:   4251.00                min:  17382.00

  4 thread
  records: 10                   records: 10
  avg:   8988.80                avg:  27930.80
  std:   1175.33(13.08%)        std:   3317.33(11.88%)
  max:   9508.00                max:  30879.00
  min:   5477.00                min:  21024.00

  8 thread
  records: 10                   records: 10
  avg:  13036.50                avg:  33739.40
  std:    170.67(1.31%)         std:   5146.22(15.25%)
  max:  13371.00                max:  40572.00
  min:  12785.00                min:  24088.00

  16 thread
  records: 10                   records: 10
  avg:  11092.40                avg:  31424.20
  std:    710.60(6.41%)         std:   3763.89(11.98%)
  max:  12446.00                max:  36635.00
  min:   9949.00                min:  25669.00

  32 thread
  records: 10                   records: 10
  avg:  11067.00                avg:  34495.80
  std:    971.06(8.77%)         std:   2721.36(7.89%)
  max:  12010.00                max:  38598.00
  min:   9002.00                min:  30636.00

In summary, MADV_FREE is about much faster than MADV_DONTNEED.

This patch (of 12):

Add core MADV_FREE implementation.

[akpm@linux-foundation.org: small cleanups]
Signed-off-by: Minchan Kim 
Acked-by: Michal Hocko 
Acked-by: Hugh Dickins 
Cc: Mika Penttil 
Cc: Michael Kerrisk 
Cc: Johannes Weiner 
Cc: Rik van Riel 
Cc: Mel Gorman 
Cc: KOSAKI Motohiro 
Cc: Jason Evans 
Cc: Daniel Micay 
Cc: "Kirill A. Shutemov" 
Cc: Shaohua Li 
Cc: 
Cc: Andy Lutomirski 
Cc: "James E.J. Bottomley" 
Cc: "Kirill A. Shutemov" 
Cc: "Shaohua Li" 
Cc: Andrea Arcangeli 
Cc: Arnd Bergmann 
Cc: Benjamin Herrenschmidt 
Cc: Catalin Marinas 
Cc: Chen Gang 
Cc: Chris Zankel 
Cc: Darrick J. Wong 
Cc: David S. Miller 
Cc: Helge Deller 
Cc: Ivan Kokshaysky 
Cc: Matt Turner 
Cc: Max Filippov 
Cc: Ralf Baechle 
Cc: Richard Henderson 
Cc: Roland Dreier 
Cc: Russell King 
Cc: Shaohua Li 
Cc: Will Deacon 
Cc: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, vmstats: new THP splitting event

2016-01-16T01:56:32+00:00

The patch replaces THP_SPLIT with tree events: THP_SPLIT_PAGE,
THP_SPLIT_PAGE_FAILED and THP_SPLIT_PMD.  It reflects the fact that we
are going to be able split PMD without the compound page and that
split_huge_page() can fail.

Signed-off-by: Kirill A.  Shutemov 
Acked-by: Christoph Lameter 
Tested-by: Sasha Levin 
Tested-by: Aneesh Kumar K.V 
Acked-by: Jerome Marchand 
Acked-by: Vlastimil Babka 
Cc: Andrea Arcangeli 
Cc: Hugh Dickins 
Cc: Dave Hansen 
Cc: Mel Gorman 
Cc: Rik van Riel 
Cc: Naoya Horiguchi 
Cc: Steve Capper 
Cc: Johannes Weiner 
Cc: Michal Hocko 
Cc: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

include/linux/vm_event_item.h: change HIGHMEM_ZONE macro definition

2015-11-06T03:34:48+00:00

Change HIGHMEM_ZONE to be the same as the DMA_ZONE macro.

Signed-off-by: yalin wang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm,vmacache: count number of system-wide flushes

2014-12-13T20:42:48+00:00

These flushes deal with sequence number overflows, such as for long lived
threads.  These are rare, but interesting from a debugging PoV.  As such,
display the number of flushes when vmacache debugging is enabled.

Signed-off-by: Davidlohr Bueso 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm/balloon_compaction: add vmstat counters and kpageflags bit

2014-10-10T02:26:01+00:00

Always mark pages with PageBalloon even if balloon compaction is disabled
and expose this mark in /proc/kpageflags as KPF_BALLOON.

Also this patch adds three counters into /proc/vmstat: "balloon_inflate",
"balloon_deflate" and "balloon_migrate".  They accumulate balloon
activity.  Current size of balloon is (balloon_inflate - balloon_deflate)
pages.

All generic balloon code now gathered under option CONFIG_MEMORY_BALLOON.
It should be selected by ballooning driver which wants use this feature.
Currently virtio-balloon is the only user.

Signed-off-by: Konstantin Khlebnikov 
Cc: Rafael Aquini 
Cc: Andrey Ryabinin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm,vmacache: add debug data

2014-06-04T23:53:57+00:00

Introduce a CONFIG_DEBUG_VM_VMACACHE option to enable counting the cache
hit rate -- exported in /proc/vmstat.

Any updates to the caching scheme needs this kind of data, thus it can
save some work re-implementing the counting all the time.

Signed-off-by: Davidlohr Bueso 
Cc: Aswin Chandramouleeswaran 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

drop_caches: add some documentation and info message

2014-04-03T23:21:04+00:00

There is plenty of anecdotal evidence and a load of blog posts
suggesting that using "drop_caches" periodically keeps your system
running in "tip top shape".  Perhaps adding some kernel documentation
will increase the amount of accurate data on its use.

If we are not shrinking caches effectively, then we have real bugs.
Using drop_caches will simply mask the bugs and make them harder to
find, but certainly does not fix them, nor is it an appropriate
"workaround" to limit the size of the caches.  On the contrary, there
have been bug reports on issues that turned out to be misguided use of
cache dropping.

Dropping caches is a very drastic and disruptive operation that is good
for debugging and running tests, but if it creates bug reports from
production use, kernel developers should be aware of its use.

Add a bit more documentation about it, a syslog message to track down
abusers, and vmstat drop counters to help analyze problem reports.

[akpm@linux-foundation.org: checkpatch fixes]
[hannes@cmpxchg.org: add runtime suppression control]
Signed-off-by: Dave Hansen 
Signed-off-by: Michal Hocko 
Acked-by: KOSAKI Motohiro 
Acked-by: KAMEZAWA Hiroyuki 
Signed-off-by: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm, x86: Account for TLB flushes only when debugging

2014-01-25T08:10:41+00:00

Bisection between 3.11 and 3.12 fingered commit 9824cf97 ("mm:
vmstats: tlb flush counters") to cause overhead problems.

The counters are undeniably useful but how often do we really
need to debug TLB flush related issues?  It does not justify
taking the penalty everywhere so make it a debugging option.

Signed-off-by: Mel Gorman 
Tested-by: Davidlohr Bueso 
Reviewed-by: Rik van Riel 
Signed-off-by: Andrew Morton 
Cc: Hugh Dickins 
Cc: Alex Shi 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Link: http://lkml.kernel.org/n/tip-XzxjntugxuwpxXhcrxqqh53b@git.kernel.org
Signed-off-by: Ingo Molnar

mm: numa: return the number of base pages altered by protection changes

2013-11-13T03:09:11+00:00

Commit 0255d4918480 ("mm: Account for a THP NUMA hinting update as one
PTE update") was added to account for the number of PTE updates when
marking pages prot_numa.  task_numa_work was using the old return value
to track how much address space had been updated.  Altering the return
value causes the scanner to do more work than it is configured or
documented to in a single unit of work.

This patch reverts that commit and accounts for the number of THP
updates separately in vmstat.  It is up to the administrator to
interpret the pair of values correctly.  This is a straight-forward
operation and likely to only be of interest when actively debugging NUMA
balancing problems.

The impact of this patch is that the NUMA PTE scanner will scan slower
when THP is enabled and workloads may converge slower as a result.  On
the flip size system CPU usage should be lower than recent tests
reported.  This is an illustrative example of a short single JVM specjbb
test

specjbb
                       3.12.0                3.12.0
                      vanilla      acctupdates
TPut 1      26143.00 (  0.00%)     25747.00 ( -1.51%)
TPut 7     185257.00 (  0.00%)    183202.00 ( -1.11%)
TPut 13    329760.00 (  0.00%)    346577.00 (  5.10%)
TPut 19    442502.00 (  0.00%)    460146.00 (  3.99%)
TPut 25    540634.00 (  0.00%)    549053.00 (  1.56%)
TPut 31    512098.00 (  0.00%)    519611.00 (  1.47%)
TPut 37    461276.00 (  0.00%)    474973.00 (  2.97%)
TPut 43    403089.00 (  0.00%)    414172.00 (  2.75%)

              3.12.0      3.12.0
             vanillaacctupdates
User         5169.64     5184.14
System        100.45       80.02
Elapsed       252.75      251.85

Performance is similar but note the reduction in system CPU time.  While
this showed a performance gain, it will not be universal but at least
it'll be behaving as documented.  The vmstats are obviously different but
here is an obvious interpretation of them from mmtests.

                                3.12.0      3.12.0
                               vanillaacctupdates
NUMA page range updates        1408326    11043064
NUMA huge PMD updates                0       21040
NUMA PTE updates               1408326      291624

"NUMA page range updates" == nr_pte_updates and is the value returned to
the NUMA pte scanner.  NUMA huge PMD updates were the number of THP
updates which in combination can be used to calculate how many ptes were
updated from userspace.

Signed-off-by: Mel Gorman 
Reported-by: Alex Thorlton 
Reviewed-by: Rik van Riel 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: vmstats: track TLB flush stats on UP too

2013-09-11T22:57:09+00:00

The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Dave Hansen 
Cc: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds