linux-stable.git/include/linux/usb, branch linux-4.1.y

usb: gadget: fix usb_ep_align_maybe endianness and new usb_ep_align

2018-05-23T01:33:55+00:00

[ Upstream commit 16b114a6d7973cf027e4c2b23eae1076eaf98c25 ]

USB spec specifies wMaxPacketSize to be little endian (as other properties),
so when using this variable in the driver we should convert to the current
CPU endianness if necessary.

This patch also introduces usb_ep_align() which does always returns the
aligned buffer size for an endpoint. This is useful to be used by USB requests
allocator functions.

Signed-off-by: Felipe F. Tonello 
Signed-off-by: Felipe Balbi 
Signed-off-by: Sasha Levin

usb: quirks: add control message delay for 1b1c:1b20

2018-03-21T03:49:54+00:00

[ Upstream commit cb88a0588717ba6c756cb5972d75766b273a6817 ]

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: Fix typo in the definition of Endpoint[out]Request

2017-07-31T17:37:52+00:00

[ Upstream commit 7cf916bd639bd26db7214f2205bccdb4b9306256 ]

The current definition is wrong. This breaks my upcoming
Aspeed virtual hub driver.

Signed-off-by: Benjamin Herrenschmidt 
Acked-by: Alan Stern 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-05-17T19:07:01+00:00

[ Upstream commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 ]

Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.

The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms.  It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies.  The generic config code does not
catch this case because the 64ms is considered a sane enough value.

This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.

Signed-off-by: Samuel Thibault 
Acked-by: Alan Stern 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

USB: EHCI: declare hostpc register as zero-length array

2016-07-11T02:27:10+00:00

[ Upstream commit 7e8b3dfef16375dbfeb1f36a83eb9f27117c51fd ]

The HOSTPC extension registers found in some EHCI implementations form
a variable-length array, with one element for each port.  Therefore
the hostpc field in struct ehci_regs should be declared as a
zero-length array, not a single-element array.

This fixes a problem reported by UBSAN.

Signed-off-by: Alan Stern 
Reported-by: Wilfried Klaebe 
Tested-by: Wilfried Klaebe 
CC: 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

usb: core: hub: hub_port_init lock controller instead of bus

2016-06-03T23:15:35+00:00

[ Upstream commit feb26ac31a2a5cb88d86680d9a94916a6343e9e6 ]

The XHCI controller presents two USB buses to the system - one for USB2
and one for USB3. The hub init code (hub_port_init) is reentrant but
only locks one bus per thread, leading to a race condition failure when
two threads attempt to simultaneously initialise a USB2 and USB3 device:

[    8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[   13.183701] usb 3-3: device descriptor read/all, error -110

On a test system this failure occurred on 6% of all boots.

The call traces at the point of failure are:

Call Trace:
 [] schedule+0x37/0x90
 [] usb_kill_urb+0x8d/0xd0
 [] ? wake_up_atomic_t+0x30/0x30
 [] usb_start_wait_urb+0xbe/0x150
 [] usb_control_msg+0xbc/0xf0
 [] hub_port_init+0x51e/0xb70
 [] hub_event+0x817/0x1570
 [] process_one_work+0x1ff/0x620
 [] ? process_one_work+0x15f/0x620
 [] worker_thread+0x64/0x4b0
 [] ? rescuer_thread+0x390/0x390
 [] kthread+0x105/0x120
 [] ? kthread_create_on_node+0x200/0x200
 [] ret_from_fork+0x3f/0x70
 [] ? kthread_create_on_node+0x200/0x200

Call Trace:
 [] xhci_setup_device+0x53d/0xa40
 [] xhci_address_device+0xe/0x10
 [] hub_port_init+0x1bf/0xb70
 [] ? trace_hardirqs_on+0xd/0x10
 [] hub_event+0x817/0x1570
 [] process_one_work+0x1ff/0x620
 [] ? process_one_work+0x15f/0x620
 [] worker_thread+0x64/0x4b0
 [] ? rescuer_thread+0x390/0x390
 [] kthread+0x105/0x120
 [] ? kthread_create_on_node+0x200/0x200
 [] ret_from_fork+0x3f/0x70
 [] ? kthread_create_on_node+0x200/0x200

Which results from the two call chains:

hub_port_init
 usb_get_device_descriptor
  usb_get_descriptor
   usb_control_msg
    usb_internal_control_msg
     usb_start_wait_urb
      usb_submit_urb / wait_for_completion_timeout / usb_kill_urb

hub_port_init
 hub_set_address
  xhci_address_device
   xhci_setup_device

Mathias Nyman explains the current behaviour violates the XHCI spec:

 hub_port_reset() will end up moving the corresponding xhci device slot
 to default state.

 As hub_port_reset() is called several times in hub_port_init() it
 sounds reasonable that we could end up with two threads having their
 xhci device slots in default state at the same time, which according to
 xhci 4.5.3 specs still is a big no no:

 "Note: Software shall not transition more than one Device Slot to the
  Default State at a time"

 So both threads fail at their next task after this.
 One fails to read the descriptor, and the other fails addressing the
 device.

Fix this in hub_port_init by locking the USB controller (instead of an
individual bus) to prevent simultaneous initialisation of both buses.

Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.org/lkml/2016/2/8/312
Link: https://lkml.org/lkml/2016/2/4/748
Signed-off-by: Chris Bainbridge 
Cc: stable 
Acked-by: Mathias Nyman 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

net: cdc_ncm: avoid changing RX/TX buffers on MTU changes

2016-01-31T19:23:35+00:00

[ Upstream commit 1dfddff5fcd869fcab0c52fafae099dfa435a935 ]

NCM buffer sizes are negotiated with the device independently of
the network device MTU.  The RX buffers are allocated by the
usbnet framework based on the rx_urb_size value set by cdc_ncm. A
single RX buffer can hold a number of MTU sized packets.

The default usbnet change_mtu ndo only modifies rx_urb_size if it
is equal to hard_mtu.  And the cdc_ncm driver will set rx_urb_size
and hard_mtu independently of each other, based on dwNtbInMaxSize
and dwNtbOutMaxSize respectively. It was therefore assumed that
usbnet_change_mtu() would never touch rx_urb_size.  This failed to
consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens
to be equal.

Fix by implementing an NCM specific change_mtu ndo, modifying the
netdev MTU without touching the buffer size settings.

Signed-off-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

USB: add quirk for devices with broken LPM

2016-01-23T04:54:10+00:00

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream.

Some USB device / host controller combinations seem to have problems
with Link Power Management.  For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.

This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.

Signed-off-by: Alan Stern 
Reported-by: Steinar H. Gunderson 
Signed-off-by: Greg Kroah-Hartman

Merge 4.0-rc7 into usb-next

2015-04-07T09:17:34+00:00

We want the fixes in here, and to help resolve merge issues.

Signed-off-by: Greg Kroah-Hartman

usbnet: Fix tx_bytes statistic running backward in cdc_ncm

2015-03-29T19:06:45+00:00

cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path.  But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space.  Also, tx_bytes is only incremented by usbnet in the
completion path.

Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.

Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings 
Signed-off-by: Bjørn Mork