linux-stable.git/include/linux/usb, branch linux-3.16.y

USB: serial: ir-usb: fix link-speed handling

2020-05-22T20:19:32+00:00

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: Felipe Balbi 
Reviewed-by: Greg Kroah-Hartman 
Signed-off-by: Johan Hovold 
Signed-off-by: Ben Hutchings

USB: core: add endpoint-blacklist quirk

2020-04-28T18:03:11+00:00

commit 73f8bda9b5dc1c69df2bc55c0cbb24461a6391a9 upstream.

Add a new device quirk that can be used to blacklist endpoints.

Since commit 3e4f8e21c4f2 ("USB: core: fix check for duplicate
endpoints") USB core ignores any duplicate endpoints found during
descriptor parsing.

In order to handle devices where the first interfaces with duplicate
endpoints are the ones that should have their endpoints ignored, we need
to add a blacklist.

Tested-by: edes 
Signed-off-by: Johan Hovold 
Link: https://lore.kernel.org/r/20200203153830.26394-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

USB: gadget: Reject endpoints with 0 maxpacket value

2019-12-19T15:58:49+00:00

commit 54f83b8c8ea9b22082a496deadf90447a326954e upstream.

Endpoints with a maxpacket length of 0 are probably useless.  They
can't transfer any data, and it's not at all unlikely that a UDC will
crash or hang when trying to handle a non-zero-length usb_request for
such an endpoint.  Indeed, dummy-hcd gets a divide error when trying
to calculate the remainder of a transfer length by the maxpacket
value, as discovered by the syzbot fuzzer.

Currently the gadget core does not check for endpoints having a
maxpacket value of 0.  This patch adds a check to usb_ep_enable(),
preventing such endpoints from being used.

As far as I know, none of the gadget drivers in the kernel tries to
create an endpoint with maxpacket = 0, but until now there has been
nothing to prevent userspace programs under gadgetfs or configfs from
doing it.

Signed-off-by: Alan Stern 
Reported-and-tested-by: syzbot+8ab8bf161038a8768553@syzkaller.appspotmail.com
Acked-by: Felipe Balbi 

Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281052370.1485-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16: adjust context]
Signed-off-by: Ben Hutchings

USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub

2019-02-11T17:53:50+00:00

commit 781f0766cc41a9dd2e5d118ef4b1d5d89430257b upstream.

Devices connected under Terminus Technology Inc. Hub (1a40:0101) may
fail to work after the system resumes from suspend:
[  206.063325] usb 3-2.4: reset full-speed USB device number 4 using xhci_hcd
[  206.143691] usb 3-2.4: device descriptor read/64, error -32
[  206.351671] usb 3-2.4: device descriptor read/64, error -32

Info for this hub:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=480 MxCh= 4
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1a40 ProdID=0101 Rev=01.11
S:  Product=USB 2.0 Hub
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Some expirements indicate that the USB devices connected to the hub are
innocent, it's the hub itself is to blame. The hub needs extra delay
time after it resets its port.

Hence wait for extra delay, if the device is connected to this quirky
hub.

Signed-off-by: Kai-Heng Feng 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
[bwh: Backported to 3.16:
 - Drop module parameter changes
 - We don't have a USB_PORT_QUIRK_FAST_ENUM quirk]
Signed-off-by: Ben Hutchings

usb: quirks: add control message delay for 1b1c:1b20

2018-06-16T21:22:33+00:00

commit cb88a0588717ba6c756cb5972d75766b273a6817 upstream.

Corsair Strafe RGB keyboard does not respond to usb control messages
sometimes and hence generates timeouts.

Commit de3af5bf259d ("usb: quirks: add delay init quirk for Corsair
Strafe RGB keyboard") tried to fix those timeouts by adding
USB_QUIRK_DELAY_INIT.

Unfortunately, even with this quirk timeouts of usb_control_msg()
can still be seen, but with a lower frequency (approx. 1 out of 15):

[   29.103520] usb 1-8: string descriptor 0 read error: -110
[   34.363097] usb 1-8: can't set config #1, error -110

Adding further delays to different locations where usb control
messages are issued just moves the timeouts to other locations,
e.g.:

[   35.400533] usbhid 1-8:1.0: can't add hid device: -110
[   35.401014] usbhid: probe of 1-8:1.0 failed with error -110

The only way to reliably avoid those issues is having a pause after
each usb control message. In approx. 200 boot cycles no more timeouts
were seen.

Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary
to have the delay in hub_port_connect() after hub_port_init().

The overall boot time seems not to be influenced by these additional
delays, even on fast machines and lightweight distributions.

Fixes: de3af5bf259d ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard")
Signed-off-by: Danilo Krummrich 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

usb: Fix typo in the definition of Endpoint[out]Request

2017-10-12T14:27:48+00:00

commit 7cf916bd639bd26db7214f2205bccdb4b9306256 upstream.

The current definition is wrong. This breaks my upcoming
Aspeed virtual hub driver.

Signed-off-by: Benjamin Herrenschmidt 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk

2017-07-18T17:40:14+00:00

commit 3243367b209faed5c320a4e5f9a565ee2a2ba958 upstream.

Some USB 2.0 devices erroneously report millisecond values in
bInterval. The generic config code manages to catch most of them,
but in some cases it's not completely enough.

The case at stake here is a USB 2.0 braille device, which wants to
announce 10ms and thus sets bInterval to 10, but with the USB 2.0
computation that yields to 64ms.  It happens that one can type fast
enough to reach this interval and get the device buffers overflown,
leading to problematic latencies.  The generic config code does not
catch this case because the 64ms is considered a sane enough value.

This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk
to mark devices which actually report milliseconds in bInterval,
and marks Vario Ultra devices as needing it.

Signed-off-by: Samuel Thibault 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Ben Hutchings

USB: add quirk for devices with broken LPM

2016-01-18T22:27:28+00:00

commit ad87e03213b552a5c33d5e1e7a19a73768397010 upstream.

Some USB device / host controller combinations seem to have problems
with Link Power Management.  For example, Steinar found that his xHCI
controller wouldn't handle bandwidth calculations correctly for two
video cards simultaneously when LPM was enabled, even though the bus
had plenty of bandwidth available.

This patch introduces a new quirk flag for devices that should remain
disabled for LPM, and creates quirk entries for Steinar's devices.

Signed-off-by: Alan Stern 
Reported-by: Steinar H. Gunderson 
Signed-off-by: Greg Kroah-Hartman 
[ luis: backported to 3.16: adjusted context ]
Signed-off-by: Luis Henriques

usbnet: Fix tx_bytes statistic running backward in cdc_ncm

2015-04-27T08:48:14+00:00

commit 7a1e890e2168e33fb62d84528e996b8b4b478fea upstream.

cdc_ncm disagrees with usbnet about how much framing overhead should
be counted in the tx_bytes statistics, and tries 'fix' this by
decrementing tx_bytes on the transmit path.  But statistics must never
be decremented except due to roll-over; this will thoroughly confuse
user-space.  Also, tx_bytes is only incremented by usbnet in the
completion path.

Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a
tx_bytes delta along with the tx_packets count.

Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics")
Signed-off-by: Ben Hutchings 
Signed-off-by: Bjørn Mork 
Signed-off-by: Luis Henriques

usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME drivers

2015-04-27T08:48:14+00:00

commit 1e9e39f4a29857a396ac7b669d109f697f66695e upstream.

Currently the usbnet core does not update the tx_packets statistic for
drivers with FLAG_MULTI_PACKET and there is no hook in the TX
completion path where they could do this.

cdc_ncm and dependent drivers are bumping tx_packets stat on the
transmit path while asix and sr9800 aren't updating it at all.

Add a packet count in struct skb_data so these drivers can fill it
in, initialise it to 1 for other drivers, and add the packet count
to the tx_packets statistic on completion.

Signed-off-by: Ben Hutchings 
Tested-by: Bjørn Mork 
Signed-off-by: David S. Miller 
Signed-off-by: Luis Henriques