linux-stable.git/include/linux/ssb/ssb.h, branch v3.6.2

ssb: recognize ARM Cortex M3

2012-06-06T19:20:22+00:00

I found this core on a BCM4322, a PCI card in the Linksys WRT610N V1.
This core is not used by the driver, this patch just makes ssb show the
correct name.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: remove rev from boardinfo

2012-05-16T16:45:20+00:00

Previously the rev contained the revision read from the pci config
space and was used as board_rev in the wireless drivers. This is wrong
the board_rev is only fetched from the sprom accordingly to the open
source part of the Broadcom SDK and brcmsmac. This patch removes the
rev from the boardinfo structure and uses the board_rev attribute from
sprom instead. This attribute is filled by PCI, PCMCIA, SDIO and SoC
code.

Signed-off-by: Hauke Mehrtens 
Tested-by: Arend van Spriel 
Signed-off-by: John W. Linville

ssb: add some missing sprom attributes

2012-03-05T20:20:49+00:00

This patch extends the sprom struct to contain all sprom attributes
found in sprom version 1 to 9. This was done accordingly to the open
source part of the Broadcom SDK.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: add alpha2

2012-03-05T20:20:49+00:00

This member contains the country code encoded with two chars

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: fix per path sprom vars

2012-03-05T20:20:49+00:00

On sprom version 4 and 5 there are 4 values for pa_2g, pa_5gl, pa_5g
and pa_5gh, for sprom version 8 and 9 there are only 3. Make the per
path sprom store also work for older sprom versions.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: remove 5GHz antenna gain from sprom

2012-03-05T20:20:49+00:00

There is no 2.4 GHz or 5GHz antenna gain stored in sprom. The sprom
just stores the gain values for antenna 1 and 2 or 1 to 4 for more
recent sprom versions. On old devices antenna 2 was used for 5 GHz wifi.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: sprom fix some sizes / signedness

2012-03-05T20:20:48+00:00

Some parts of the sprom struct are bigger than needed.
The leddc and maxpwr values are just 8 bit long and not 16.
rxpo2g and rxpo5g are signed

I got these information for the open source part of the Broadcom SDK
covering sprom version 1 to 9. rxpo2g contained a negative number on my
bcm5354 based device, this cased an error and Broadcom SDK says this is
signed.

Signed-off-by: Hauke Mehrtens 
Signed-off-by: John W. Linville

ssb: SPROM: extract each core power info

2012-01-24T19:06:04+00:00

We already extract some basic info but it's incomplete, reads info
about the first core only. Used data structure doesn't allow easy
adding of more cores.
This patch adds new struct and array for storing power info. The plan
is to: switch all extractors (including the ones using NVRAM) to new
struct, switch drivers, then deprecate and finally drop old SSB fields.

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

ssb: extract FEM info from SPROM

2011-12-13T20:30:49+00:00

Signed-off-by: Rafał Miłecki 
Signed-off-by: John W. Linville

include: convert various register fcns to macros to avoid include chaining

2011-10-31T23:32:32+00:00

The original implementations reference THIS_MODULE in an inline.
We could include , but it is better to avoid chaining.

Fortunately someone else already thought of this, and made a similar
inline into a #define in  for device_schedule_callback(),
[see commit 523ded71de0] so follow that precedent here.

Also bubble up any __must_check that were used on the prev. wrapper inline
functions up one to the real __register functions, to preserve any prev.
sanity checks that were used in those instances.

Signed-off-by: Paul Gortmaker