The build fails with llvm 21/22:

  $ make LLVM=1 -j
    ...
    LD      vmlinux.o
    GEN     .vmlinux.objs
    ...
    BTF     .tmp_vmlinux1.btf.o
    ...
    AS      .tmp_vmlinux2.kallsyms.o
    LD      vmlinux.unstripped
    BTFIDS  vmlinux.unstripped
  WARN: resolve_btfids: unresolved symbol migrate_enable
  WARN: resolve_btfids: unresolved symbol migrate_disable
  make[2]: *** [vmlinux.unstripped] Error 255
  make[2]: *** Deleting file 'vmlinux.unstripped'
  make[1]: *** [Makefile:1242: vmlinux] Error 2
  make: *** [Makefile:248: __sub-make] Error 2

Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.

Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.

Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.

[note: Peter ok-ed the patch, Alexei rewrote commit log]

Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Menglong Dong <menglong.dong@linux.dev>
Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Pull scheduler updates from Ingo Molnar:
 "Core scheduler changes:

   - Make migrate_{en,dis}able() inline, to improve performance
     (Menglong Dong)

   - Move STDL_INIT() functions out-of-line (Peter Zijlstra)

   - Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)

  Fair scheduling:

   - Defer throttling to when tasks exit to user-space, to reduce the
     chance & impact of throttle-preemption with held locks and other
     resources (Aaron Lu, Valentin Schneider)

   - Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
     warning was getting triggered on certain topologies (Peter
     Zijlstra)

  Misc cleanups & fixes:

   - Header cleanups (Menglong Dong)

   - Fix race in push_dl_task() (Harshit Agarwal)"

* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix some typos in include/linux/preempt.h
  sched: Make migrate_{en,dis}able() inline
  rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
  arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
  sched/fair: Do not balance task to a throttled cfs_rq
  sched/fair: Do not special case tasks in throttled hierarchy
  sched/fair: update_cfs_group() for throttled cfs_rqs
  sched/fair: Propagate load for throttled cfs_rq
  sched/fair: Get rid of throttled_lb_pair()
  sched/fair: Task based throttle time accounting
  sched/fair: Switch to task based throttle model
  sched/fair: Implement throttle task work and related helpers
  sched/fair: Add related data structure for task based throttle
  sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
  sched: Move STDL_INIT() functions out-of-line
  sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
  sched/deadline: Fix race in push_dl_task()

For now, migrate_enable and migrate_disable are global, which makes them
become hotspots in some case. Take BPF for example, the function calling
to migrate_enable and migrate_disable in BPF trampoline can introduce
significant overhead, and following is the 'perf top' of FENTRY's
benchmark (./tools/testing/selftests/bpf/bench trig-fentry):

  54.63% bpf_prog_2dcccf652aac1793_bench_trigger_fentry [k]
                 bpf_prog_2dcccf652aac1793_bench_trigger_fentry
  10.43% [kernel] [k] migrate_enable
  10.07% bpf_trampoline_6442517037 [k] bpf_trampoline_6442517037
  8.06% [kernel] [k] __bpf_prog_exit_recur
  4.11% libc.so.6 [.] syscall
  2.15% [kernel] [k] entry_SYSCALL_64
  1.48% [kernel] [k] memchr_inv
  1.32% [kernel] [k] fput
  1.16% [kernel] [k] _copy_to_user
  0.73% [kernel] [k] bpf_prog_test_run_raw_tp

So in this commit, we make migrate_enable/migrate_disable inline to obtain
better performance. The struct rq is defined internally in
kernel/sched/sched.h, and the field "nr_pinned" is accessed in
migrate_enable/migrate_disable, which makes it hard to make them inline.

Alexei Starovoitov suggests to generate the offset of "nr_pinned" in [1],
so we can define the migrate_enable/migrate_disable in
include/linux/sched.h and access "this_rq()->nr_pinned" with
"(void *)this_rq() + RQ_nr_pinned".

The offset of "nr_pinned" is generated in include/generated/rq-offsets.h
by kernel/sched/rq-offsets.c.

Generally speaking, we move the definition of migrate_enable and
migrate_disable to include/linux/sched.h from kernel/sched/core.c. The
calling to __set_cpus_allowed_ptr() is leaved in ___migrate_enable().

The "struct rq" is not available in include/linux/sched.h, so we can't
access the "runqueues" with this_cpu_ptr(), as the compilation will fail
in this_cpu_ptr() -> raw_cpu_ptr() -> __verify_pcpu_ptr():
  typeof((ptr) + 0)

So we introduce the this_rq_raw() and access the runqueues with
arch_raw_cpu_ptr/PERCPU_PTR directly.

The variable "runqueues" is not visible in the kernel modules, and export
it is not a good idea. As Peter Zijlstra advised in [2], we define and
export migrate_enable/migrate_disable in kernel/sched/core.c too, and use
them for the modules.

Before this patch, the performance of BPF FENTRY is:

  fentry         :  113.030 ± 0.149M/s
  fentry         :  112.501 ± 0.187M/s
  fentry         :  112.828 ± 0.267M/s
  fentry         :  115.287 ± 0.241M/s

After this patch, the performance of BPF FENTRY increases to:

  fentry         :  143.644 ± 0.670M/s
  fentry         :  149.764 ± 0.362M/s
  fentry         :  149.642 ± 0.156M/s
  fentry         :  145.263 ± 0.221M/s

Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/bpf/CAADnVQ+5sEDKHdsJY5ZsfGDO_1SEhhQWHrt2SMBG5SYyQ+jt7w@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/20250819123214.GH4067720@noisy.programming.kicks-ass.net/ [2]

John reported undesirable behaviour with the dl_server since commit:
cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling").

When starving fair tasks on purpose (starting spinning FIFO tasks),
his fair workload, which often goes (briefly) idle, would delay fair
invocations for a second, running one invocation per second was both
unexpected and terribly slow.

The reason this happens is that when dl_se->server_pick_task() returns
NULL, indicating no runnable tasks, it would yield, pushing any later
jobs out a whole period (1 second).

Instead simply stop the server. This should restore behaviour in that
a later wakeup (which restarts the server) will be able to continue
running (subject to the CBS wakeup rules).

Notably, this does not re-introduce the behaviour cccb45d7c4295 set
out to solve, any start/stop cycle is naturally throttled by the timer
period (no active cancel).

Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>

John found it was easy to hit lockup warnings when running locktorture
on a 2 CPU VM, which he bisected down to: commit cccb45d7c429
("sched/deadline: Less agressive dl_server handling").

While debugging it seems there is a chance where we end up with the
dl_server dequeued, with dl_se->dl_server_active. This causes
dl_server_start() to return without enqueueing the dl_server, thus it
fails to run when RT tasks starve the cpu.

When this happens, dl_server_timer() catches the
'!dl_se->server_has_tasks(dl_se)' case, which then calls
replenish_dl_entity() and dl_server_stopped() and finally return
HRTIMER_NO_RESTART.

This ends in no new timer and also no enqueue, leaving the dl_server
'dead', allowing starvation.

What should have happened is for the bandwidth timer to start the
zero-laxity timer, which in turn would enqueue the dl_server and cause
dl_se->server_pick_task() to be called -- which will stop the
dl_server if no fair tasks are observed for a whole period.

IOW, it is totally irrelevant if there are fair tasks at the moment of
bandwidth refresh.

This removes all dl_se->server_has_tasks() users, so remove the whole
thing.

Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>

Add related data structures for this new throttle functionality.

Tesed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://lore.kernel.org/r/20250829081120.806-2-ziqianlu@bytedance.com

Pull locking fixes from Borislav Petkov:

 - Make sure sanity checks down in the mutex lock path happen on the
   correct type of task so that they don't trigger falsely

 - Use the write unsafe user access pairs when writing a futex value to
   prevent an error on PowerPC which does user read and write accesses
   differently

* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
  futex: Use user_write_access_begin/_end() in futex_put_value()

The __clear_task_blocked_on() helper added a number of sanity
checks ensuring we hold the mutex wait lock and that the task
we are clearing blocked_on pointer (if set) matches the mutex.

However, there is an edge case in the _ww_mutex_wound() logic
where we need to clear the blocked_on pointer for the task that
owns the mutex, not the task that is waiting on the mutex.

For this case the sanity checks aren't valid, so handle this
by allowing a NULL lock to skip the additional checks.

K Prateek Nayak and Maarten Lankhorst also pointed out that in
this case where we don't hold the owner's mutex wait_lock, we
need to be a bit more careful using READ_ONCE/WRITE_ONCE in both
the __clear_task_blocked_on() and __set_task_blocked_on()
implementations to avoid accidentally tripping WARN_ONs if two
instances race. So do that here as well.

This issue was easier to miss, I realized, as the test-ww_mutex
driver only exercises the wait-die class of ww_mutexes. I've
sent a patch[1] to address this so the logic will be easier to
test.

[1]: https://lore.kernel.org/lkml/20250801023358.562525-2-jstultz@google.com/

Fixes: a4f0b6fef4b0 ("locking/mutex: Add p->blocked_on wrappers for correctness checks")
Closes: https://lore.kernel.org/lkml/68894443.a00a0220.26d0e1.0015.GAE@google.com/
Reported-by: syzbot+602c4720aed62576cd79@syzkaller.appspotmail.com
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250805001026.2247040-1-jstultz@google.com

Pull initial deferred unwind infrastructure from Steven Rostedt:
 "This is the core infrastructure for the deferred unwinder that is
  required for sframes[1]. Several other patch series are based on this
  work although those patch series are not dependent on each other. In
  order to simplify the development, having this core series upstream
  will allow the other series to be worked on in parallel. The other
  series are:

    - The two patches to implement x86 support [2] [3]

    - The s390 work [4]

    - The perf work [5]

    - The ftrace work [6]

    - The sframe work [7]

  And more is on the way.

  The core infrastructure adds the following in kernel APIs:

    - int unwind_user_faultable(struct unwind_stacktrace *trace);

        Performs a user space stack trace that may fault user pages in.

    - int unwind_deferred_init(struct unwind_work *work, unwind_callback_t func);

        Allows a tracer to register with the unwind deferred
        infrastructure.

    - int unwind_deferred_request(struct unwind_work *work, u64 *cookie);

        Used when a tracer request a deferred trace. Can be called from
        interrupt or NMI context.

    - void unwind_deferred_cancel(struct unwind_work *work);

        Called by a tracer to unregister from the deferred unwind
        infrastructure.

    - void unwind_deferred_task_exit(struct task_struct *task);

        Called by task exit code to flush any pending unwind requests.

    - void unwind_task_init(struct task_struct *task);

        Called by do_fork() to initialize the task struct for the
        deferred unwinder.

    - void unwind_task_free(struct task_struct *task);

        Called by do_exit() to free up any resources used by the
        deferred unwinder.

    None of the above is actually compiled unless an architecture enables it,
    which none currently do"

Link: https://sourceware.org/binutils/wiki/sframe [1]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.260781923@kernel.org/ [2]
Link: https://lore.kernel.org/linux-trace-kernel/20250717004958.432327787@kernel.org/ [3]
Link: https://lore.kernel.org/linux-trace-kernel/20250710163522.3195293-1-jremus@linux.ibm.com/ [4]
Link: https://lore.kernel.org/linux-trace-kernel/20250718164119.089692174@kernel.org/ [5]
Link: https://lore.kernel.org/linux-trace-kernel/20250424192612.505622711@goodmis.org/ [6]
Link: https://lore.kernel.org/linux-trace-kernel/20250717012848.927473176@kernel.org/ [7]

* tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  unwind: Finish up unwind when a task exits
  unwind deferred: Use SRCU unwind_deferred_task_work()
  unwind: Add USED bit to only have one conditional on way back to user space
  unwind deferred: Add unwind_completed mask to stop spurious callbacks
  unwind deferred: Use bitmask to determine which callbacks to call
  unwind_user/deferred: Make unwind deferral requests NMI-safe
  unwind_user/deferred: Add deferred unwinding interface
  unwind_user/deferred: Add unwind cache
  unwind_user/deferred: Add unwind_user_faultable()
  unwind_user: Add user space unwinding API with frame pointer support

Pull runtime verification updates from Steven Rostedt:

 - Added Linear temporal logic monitors for RT application

   Real-time applications may have design flaws causing them to have
   unexpected latency. For example, the applications may raise page
   faults, or may be blocked trying to take a mutex without priority
   inheritance.

   However, while attempting to implement DA monitors for these
   real-time rules, deterministic automaton is found to be inappropriate
   as the specification language. The automaton is complicated, hard to
   understand, and error-prone.

   For these cases, linear temporal logic is found to be more suitable.
   The LTL is more concise and intuitive.

 - Make printk_deferred() public

   The new monitors needed access to printk_deferred(). Make them
   visible for the entire kernel.

 - Add a vpanic() to allow for va_list to be passed to panic.

 - Add rtapp container monitor.

   A collection of monitors that check for common problems with
   real-time applications that cause unexpected latency.

 - Add page fault tracepoints to risc-v

   These tracepoints are necessary to for the RV monitor to run on
   risc-v.

 - Fix the behaviour of the rv tool with -s and idle tasks.

 - Allow the rv tool to gracefully terminate with SIGTERM

 - Adjusts dot2c not to create lines over 100 columns

 - Properly order nested monitors in the RV Kconfig file

 - Return the registration error in all DA monitor instead of 0

 - Update and add new sched collection monitors

   Replace tss and sncid monitors with more complete sts:

   Not only prove that switches occur in scheduling context and scheduling
   needs interrupt disabled but also that each call to the scheduler
   disables interrupts to (optionally) switch.

   New monitor: nrp
     Preemption requires need resched which is cleared by any switch
     (includes a non optimal workaround for /nested/ preemptions)

   New monitor: sssw
     suspension requires setting the task to sleepable and, after the
     switch occurs, the task requires a wakeup to come back to runnable

   New monitor: opid
      waking and need-resched operations occur with interrupts and
      preemption disabled or in IRQ without explicitly disabling
      preemption"

* tag 'trace-rv-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (48 commits)
  rv: Add opid per-cpu monitor
  rv: Add nrp and sssw per-task monitors
  rv: Replace tss and sncid monitors with more complete sts
  sched: Adapt sched tracepoints for RV task model
  rv: Retry when da monitor detects race conditions
  rv: Adjust monitor dependencies
  rv: Use strings in da monitors tracepoints
  rv: Remove trailing whitespace from tracepoint string
  rv: Add da_handle_start_run_event_ to per-task monitors
  rv: Fix wrong type cast in reactors_show() and monitor_reactor_show()
  rv: Fix wrong type cast in monitors_show()
  rv: Remove struct rv_monitor::reacting
  rv: Remove rv_reactor's reference counter
  rv: Merge struct rv_reactor_def into struct rv_reactor
  rv: Merge struct rv_monitor_def into struct rv_monitor
  rv: Remove unused field in struct rv_monitor_def
  rv: Return init error when registering monitors
  verification/rvgen: Organise Kconfig entries for nested monitors
  tools/dot2c: Fix generated files going over 100 column limit
  tools/rv: Stop gracefully also on SIGTERM
  ...