<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/include/linux/sched.h, branch v5.18.3</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>oom_kill.c: futex: delay the OOM reaper to allow time for proper futex cleanup</title>
<updated>2022-04-22T03:01:10+00:00</updated>
<author>
<name>Nico Pache</name>
<email>npache@redhat.com</email>
</author>
<published>2022-04-21T23:36:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e4a38402c36e42df28eb1a5394be87e6571fb48a'/>
<id>e4a38402c36e42df28eb1a5394be87e6571fb48a</id>
<content type='text'>
The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper.  This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:

    CPU1                               CPU2
    --------------------------------------------------------------------
    page_fault
    do_exit "signal"
    wake_oom_reaper
                                        oom_reaper
                                        oom_reap_task_mm (invalidates mm)
    exit_mm
    exit_mm_release
    futex_exit_release
    futex_cleanup
    exit_robust_list
    get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1]
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz &lt;jsavitz@redhat.com&gt;
Signed-off-by: Nico Pache &lt;npache@redhat.com&gt;
Co-developed-by: Joel Savitz &lt;jsavitz@redhat.com&gt;
Suggested-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Rafael Aquini &lt;aquini@redhat.com&gt;
Cc: Waiman Long &lt;longman@redhat.com&gt;
Cc: Herton R. Krzesinski &lt;herton@redhat.com&gt;
Cc: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Cc: Vincent Guittot &lt;vincent.guittot@linaro.org&gt;
Cc: Dietmar Eggemann &lt;dietmar.eggemann@arm.com&gt;
Cc: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Cc: Ben Segall &lt;bsegall@google.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Daniel Bristot de Oliveira &lt;bristot@redhat.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Andrea Arcangeli &lt;aarcange@redhat.com&gt;
Cc: Davidlohr Bueso &lt;dave@stgolabs.net&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Joel Savitz &lt;jsavitz@redhat.com&gt;
Cc: Darren Hart &lt;dvhart@infradead.org&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The pthread struct is allocated on PRIVATE|ANONYMOUS memory [1] which
can be targeted by the oom reaper.  This mapping is used to store the
futex robust list head; the kernel does not keep a copy of the robust
list and instead references a userspace address to maintain the
robustness during a process death.

A race can occur between exit_mm and the oom reaper that allows the oom
reaper to free the memory of the futex robust list before the exit path
has handled the futex death:

    CPU1                               CPU2
    --------------------------------------------------------------------
    page_fault
    do_exit "signal"
    wake_oom_reaper
                                        oom_reaper
                                        oom_reap_task_mm (invalidates mm)
    exit_mm
    exit_mm_release
    futex_exit_release
    futex_cleanup
    exit_robust_list
    get_user (EFAULT- can't access memory)

If the get_user EFAULT's, the kernel will be unable to recover the
waiters on the robust_list, leaving userspace mutexes hung indefinitely.

Delay the OOM reaper, allowing more time for the exit path to perform
the futex cleanup.

Reproducer: https://gitlab.com/jsavitz/oom_futex_reproducer

Based on a patch by Michal Hocko.

Link: https://elixir.bootlin.com/glibc/glibc-2.35/source/nptl/allocatestack.c#L370 [1]
Link: https://lkml.kernel.org/r/20220414144042.677008-1-npache@redhat.com
Fixes: 212925802454 ("mm: oom: let oom_reap_task and exit_mmap run concurrently")
Signed-off-by: Joel Savitz &lt;jsavitz@redhat.com&gt;
Signed-off-by: Nico Pache &lt;npache@redhat.com&gt;
Co-developed-by: Joel Savitz &lt;jsavitz@redhat.com&gt;
Suggested-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Acked-by: Michal Hocko &lt;mhocko@suse.com&gt;
Cc: Rafael Aquini &lt;aquini@redhat.com&gt;
Cc: Waiman Long &lt;longman@redhat.com&gt;
Cc: Herton R. Krzesinski &lt;herton@redhat.com&gt;
Cc: Juri Lelli &lt;juri.lelli@redhat.com&gt;
Cc: Vincent Guittot &lt;vincent.guittot@linaro.org&gt;
Cc: Dietmar Eggemann &lt;dietmar.eggemann@arm.com&gt;
Cc: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Cc: Ben Segall &lt;bsegall@google.com&gt;
Cc: Mel Gorman &lt;mgorman@suse.de&gt;
Cc: Daniel Bristot de Oliveira &lt;bristot@redhat.com&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Andrea Arcangeli &lt;aarcange@redhat.com&gt;
Cc: Davidlohr Bueso &lt;dave@stgolabs.net&gt;
Cc: Peter Zijlstra &lt;peterz@infradead.org&gt;
Cc: Ingo Molnar &lt;mingo@redhat.com&gt;
Cc: Joel Savitz &lt;jsavitz@redhat.com&gt;
Cc: Darren Hart &lt;dvhart@infradead.org&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"</title>
<updated>2022-03-31T08:36:55+00:00</updated>
<author>
<name>Thomas Gleixner</name>
<email>tglx@linutronix.de</email>
</author>
<published>2022-03-31T08:36:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7dd5ad2d3e82fb55229e3fe18e09160878e77e20'/>
<id>7dd5ad2d3e82fb55229e3fe18e09160878e77e20</id>
<content type='text'>
Revert commit bf9ad37dc8a. It needs to be better encapsulated and
generalized.

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: Oleg Nesterov &lt;oleg@redhat.com&gt;
Cc: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Revert commit bf9ad37dc8a. It needs to be better encapsulated and
generalized.

Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: Oleg Nesterov &lt;oleg@redhat.com&gt;
Cc: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next</title>
<updated>2022-03-24T20:13:26+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-03-24T20:13:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=169e77764adc041b1dacba84ea90516a895d43b2'/>
<id>169e77764adc041b1dacba84ea90516a895d43b2</id>
<content type='text'>
Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp-&gt;data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot &amp; felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from Jakub Kicinski:
 "The sprinkling of SPI drivers is because we added a new one and Mark
  sent us a SPI driver interface conversion pull request.

  Core
  ----

   - Introduce XDP multi-buffer support, allowing the use of XDP with
     jumbo frame MTUs and combination with Rx coalescing offloads (LRO).

   - Speed up netns dismantling (5x) and lower the memory cost a little.
     Remove unnecessary per-netns sockets. Scope some lists to a netns.
     Cut down RCU syncing. Use batch methods. Allow netdev registration
     to complete out of order.

   - Support distinguishing timestamp types (ingress vs egress) and
     maintaining them across packet scrubbing points (e.g. redirect).

   - Continue the work of annotating packet drop reasons throughout the
     stack.

   - Switch netdev error counters from an atomic to dynamically
     allocated per-CPU counters.

   - Rework a few preempt_disable(), local_irq_save() and busy waiting
     sections problematic on PREEMPT_RT.

   - Extend the ref_tracker to allow catching use-after-free bugs.

  BPF
  ---

   - Introduce "packing allocator" for BPF JIT images. JITed code is
     marked read only, and used to be allocated at page granularity.
     Custom allocator allows for more efficient memory use, lower iTLB
     pressure and prevents identity mapping huge pages from getting
     split.

   - Make use of BTF type annotations (e.g. __user, __percpu) to enforce
     the correct probe read access method, add appropriate helpers.

   - Convert the BPF preload to use light skeleton and drop the
     user-mode-driver dependency.

   - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
     its use as a packet generator.

   - Allow local storage memory to be allocated with GFP_KERNEL if
     called from a hook allowed to sleep.

   - Introduce fprobe (multi kprobe) to speed up mass attachment (arch
     bits to come later).

   - Add unstable conntrack lookup helpers for BPF by using the BPF
     kfunc infra.

   - Allow cgroup BPF progs to return custom errors to user space.

   - Add support for AF_UNIX iterator batching.

   - Allow iterator programs to use sleepable helpers.

   - Support JIT of add, and, or, xor and xchg atomic ops on arm64.

   - Add BTFGen support to bpftool which allows to use CO-RE in kernels
     without BTF info.

   - Large number of libbpf API improvements, cleanups and deprecations.

  Protocols
  ---------

   - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.

   - Adjust TSO packet sizes based on min_rtt, allowing very low latency
     links (data centers) to always send full-sized TSO super-frames.

   - Make IPv6 flow label changes (AKA hash rethink) more configurable,
     via sysctl and setsockopt. Distinguish between server and client
     behavior.

   - VxLAN support to "collect metadata" devices to terminate only
     configured VNIs. This is similar to VLAN filtering in the bridge.

   - Support inserting IPv6 IOAM information to a fraction of frames.

   - Add protocol attribute to IP addresses to allow identifying where
     given address comes from (kernel-generated, DHCP etc.)

   - Support setting socket and IPv6 options via cmsg on ping6 sockets.

   - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
     Define dscp_t and stop taking ECN bits into account in fib-rules.

   - Add support for locked bridge ports (for 802.1X).

   - tun: support NAPI for packets received from batched XDP buffs,
     doubling the performance in some scenarios.

   - IPv6 extension header handling in Open vSwitch.

   - Support IPv6 control message load balancing in bonding, prevent
     neighbor solicitation and advertisement from using the wrong port.
     Support NS/NA monitor selection similar to existing ARP monitor.

   - SMC
      - improve performance with TCP_CORK and sendfile()
      - support auto-corking
      - support TCP_NODELAY

   - MCTP (Management Component Transport Protocol)
      - add user space tag control interface
      - I2C binding driver (as specified by DMTF DSP0237)

   - Multi-BSSID beacon handling in AP mode for WiFi.

   - Bluetooth:
      - handle MSFT Monitor Device Event
      - add MGMT Adv Monitor Device Found/Lost events

   - Multi-Path TCP:
      - add support for the SO_SNDTIMEO socket option
      - lots of selftest cleanups and improvements

   - Increase the max PDU size in CAN ISOTP to 64 kB.

  Driver API
  ----------

   - Add HW counters for SW netdevs, a mechanism for devices which
     offload packet forwarding to report packet statistics back to
     software interfaces such as tunnels.

   - Select the default NIC queue count as a fraction of number of
     physical CPU cores, instead of hard-coding to 8.

   - Expose devlink instance locks to drivers. Allow device layer of
     drivers to use that lock directly instead of creating their own
     which always runs into ordering issues in devlink callbacks.

   - Add header/data split indication to guide user space enabling of
     TCP zero-copy Rx.

   - Allow configuring completion queue event size.

   - Refactor page_pool to enable fragmenting after allocation.

   - Add allocation and page reuse statistics to page_pool.

   - Improve Multiple Spanning Trees support in the bridge to allow
     reuse of topologies across VLANs, saving HW resources in switches.

   - DSA (Distributed Switch Architecture):
      - replay and offload of host VLAN entries
      - offload of static and local FDB entries on LAG interfaces
      - FDB isolation and unicast filtering

  New hardware / drivers
  ----------------------

   - Ethernet:
      - LAN937x T1 PHYs
      - Davicom DM9051 SPI NIC driver
      - Realtek RTL8367S, RTL8367RB-VB switch and MDIO
      - Microchip ksz8563 switches
      - Netronome NFP3800 SmartNICs
      - Fungible SmartNICs
      - MediaTek MT8195 switches

   - WiFi:
      - mt76: MediaTek mt7916
      - mt76: MediaTek mt7921u USB adapters
      - brcmfmac: Broadcom BCM43454/6

   - Mobile:
      - iosm: Intel M.2 7360 WWAN card

  Drivers
  -------

   - Convert many drivers to the new phylink API built for split PCS
     designs but also simplifying other cases.

   - Intel Ethernet NICs:
      - add TTY for GNSS module for E810T device
      - improve AF_XDP performance
      - GTP-C and GTP-U filter offload
      - QinQ VLAN support

   - Mellanox Ethernet NICs (mlx5):
      - support xdp-&gt;data_meta
      - multi-buffer XDP
      - offload tc push_eth and pop_eth actions

   - Netronome Ethernet NICs (nfp):
      - flow-independent tc action hardware offload (police / meter)
      - AF_XDP

   - Other Ethernet NICs:
      - at803x: fiber and SFP support
      - xgmac: mdio: preamble suppression and custom MDC frequencies
      - r8169: enable ASPM L1.2 if system vendor flags it as safe
      - macb/gem: ZynqMP SGMII
      - hns3: add TX push mode
      - dpaa2-eth: software TSO
      - lan743x: multi-queue, mdio, SGMII, PTP
      - axienet: NAPI and GRO support

   - Mellanox Ethernet switches (mlxsw):
      - source and dest IP address rewrites
      - RJ45 ports

   - Marvell Ethernet switches (prestera):
      - basic routing offload
      - multi-chain TC ACL offload

   - NXP embedded Ethernet switches (ocelot &amp; felix):
      - PTP over UDP with the ocelot-8021q DSA tagging protocol
      - basic QoS classification on Felix DSA switch using dcbnl
      - port mirroring for ocelot switches

   - Microchip high-speed industrial Ethernet (sparx5):
      - offloading of bridge port flooding flags
      - PTP Hardware Clock

   - Other embedded switches:
      - lan966x: PTP Hardward Clock
      - qca8k: mdio read/write operations via crafted Ethernet packets

   - Qualcomm 802.11ax WiFi (ath11k):
      - add LDPC FEC type and 802.11ax High Efficiency data in radiotap
      - enable RX PPDU stats in monitor co-exist mode

   - Intel WiFi (iwlwifi):
      - UHB TAS enablement via BIOS
      - band disablement via BIOS
      - channel switch offload
      - 32 Rx AMPDU sessions in newer devices

   - MediaTek WiFi (mt76):
      - background radar detection
      - thermal management improvements on mt7915
      - SAR support for more mt76 platforms
      - MBSSID and 6 GHz band on mt7915

   - RealTek WiFi:
      - rtw89: AP mode
      - rtw89: 160 MHz channels and 6 GHz band
      - rtw89: hardware scan

   - Bluetooth:
      - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)

   - Microchip CAN (mcp251xfd):
      - multiple RX-FIFOs and runtime configurable RX/TX rings
      - internal PLL, runtime PM handling simplification
      - improve chip detection and error handling after wakeup"

* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
  llc: fix netdevice reference leaks in llc_ui_bind()
  drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
  ice: don't allow to run ice_send_event_to_aux() in atomic ctx
  ice: fix 'scheduling while atomic' on aux critical err interrupt
  net/sched: fix incorrect vlan_push_eth dest field
  net: bridge: mst: Restrict info size queries to bridge ports
  net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
  drivers: net: xgene: Fix regression in CRC stripping
  net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
  net: dsa: fix missing host-filtered multicast addresses
  net/mlx5e: Fix build warning, detected write beyond size of field
  iwlwifi: mvm: Don't fail if PPAG isn't supported
  selftests/bpf: Fix kprobe_multi test.
  Revert "rethook: x86: Add rethook x86 implementation"
  Revert "arm64: rethook: Add arm64 rethook implementation"
  Revert "powerpc: Add rethook support"
  Revert "ARM: rethook: Add rethook arm implementation"
  netdevice: add missing dm_private kdoc
  net: bridge: mst: prevent NULL deref in br_mst_info_size()
  selftests: forwarding: Use same VRF for port and VLAN upper
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'akpm' (patches from Andrew)</title>
<updated>2022-03-22T23:11:53+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-03-22T23:11:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3bf03b9a0839c9fb06927ae53ebd0f960b19d408'/>
<id>3bf03b9a0839c9fb06927ae53ebd0f960b19d408</id>
<content type='text'>
Merge updates from Andrew Morton:

 - A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs

 - Most the MM patches which precede the patches in Willy's tree: kasan,
   pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
   sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
   userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
   cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
   zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.

* emailed patches from Andrew Morton &lt;akpm@linux-foundation.org&gt;: (227 commits)
  mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
  Docs/ABI/testing: add DAMON sysfs interface ABI document
  Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
  selftests/damon: add a test for DAMON sysfs interface
  mm/damon/sysfs: support DAMOS stats
  mm/damon/sysfs: support DAMOS watermarks
  mm/damon/sysfs: support schemes prioritization
  mm/damon/sysfs: support DAMOS quotas
  mm/damon/sysfs: support DAMON-based Operation Schemes
  mm/damon/sysfs: support the physical address space monitoring
  mm/damon/sysfs: link DAMON for virtual address spaces monitoring
  mm/damon: implement a minimal stub for sysfs-based DAMON interface
  mm/damon/core: add number of each enum type values
  mm/damon/core: allow non-exclusive DAMON start/stop
  Docs/damon: update outdated term 'regions update interval'
  Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
  Docs/vm/damon: call low level monitoring primitives the operations
  mm/damon: remove unnecessary CONFIG_DAMON option
  mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
  mm/damon/dbgfs-test: fix is_target_id() change
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Merge updates from Andrew Morton:

 - A few misc subsystems: kthread, scripts, ntfs, ocfs2, block, and vfs

 - Most the MM patches which precede the patches in Willy's tree: kasan,
   pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap,
   sparsemem, vmalloc, pagealloc, memory-failure, mlock, hugetlb,
   userfaultfd, vmscan, compaction, mempolicy, oom-kill, migration, thp,
   cma, autonuma, psi, ksm, page-poison, madvise, memory-hotplug, rmap,
   zswap, uaccess, ioremap, highmem, cleanups, kfence, hmm, and damon.

* emailed patches from Andrew Morton &lt;akpm@linux-foundation.org&gt;: (227 commits)
  mm/damon/sysfs: remove repeat container_of() in damon_sysfs_kdamond_release()
  Docs/ABI/testing: add DAMON sysfs interface ABI document
  Docs/admin-guide/mm/damon/usage: document DAMON sysfs interface
  selftests/damon: add a test for DAMON sysfs interface
  mm/damon/sysfs: support DAMOS stats
  mm/damon/sysfs: support DAMOS watermarks
  mm/damon/sysfs: support schemes prioritization
  mm/damon/sysfs: support DAMOS quotas
  mm/damon/sysfs: support DAMON-based Operation Schemes
  mm/damon/sysfs: support the physical address space monitoring
  mm/damon/sysfs: link DAMON for virtual address spaces monitoring
  mm/damon: implement a minimal stub for sysfs-based DAMON interface
  mm/damon/core: add number of each enum type values
  mm/damon/core: allow non-exclusive DAMON start/stop
  Docs/damon: update outdated term 'regions update interval'
  Docs/vm/damon/design: update DAMON-Idle Page Tracking interference handling
  Docs/vm/damon: call low level monitoring primitives the operations
  mm/damon: remove unnecessary CONFIG_DAMON option
  mm/damon/paddr,vaddr: remove damon_{p,v}a_{target_valid,set_operations}()
  mm/damon/dbgfs-test: fix is_target_id() change
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>mm/fs: delete PF_SWAPWRITE</title>
<updated>2022-03-22T22:57:08+00:00</updated>
<author>
<name>Hugh Dickins</name>
<email>hughd@google.com</email>
</author>
<published>2022-03-22T21:45:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b698f0a1773f7df73f2bb4bfe0e597ea1bb3881f'/>
<id>b698f0a1773f7df73f2bb4bfe0e597ea1bb3881f</id>
<content type='text'>
PF_SWAPWRITE has been redundant since v3.2 commit ee72886d8ed5 ("mm:
vmscan: do not writeback filesystem pages in direct reclaim").

Coincidentally, NeilBrown's current patch "remove inode_congested()"
deletes may_write_to_inode(), which appeared to be the one function which
took notice of PF_SWAPWRITE.  But if you study the old logic, and the
conditions under which may_write_to_inode() was called, you discover that
flag and function have been pointless for a decade.

Link: https://lkml.kernel.org/r/75e80e7-742d-e3bd-531-614db8961e4@google.com
Signed-off-by: Hugh Dickins &lt;hughd@google.com&gt;
Cc: NeilBrown &lt;neilb@suse.de&gt;
Cc: Jan Kara &lt;jack@suse.de&gt;
Cc: "Darrick J. Wong" &lt;djwong@kernel.org&gt;
Cc: Dave Chinner &lt;david@fromorbit.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
PF_SWAPWRITE has been redundant since v3.2 commit ee72886d8ed5 ("mm:
vmscan: do not writeback filesystem pages in direct reclaim").

Coincidentally, NeilBrown's current patch "remove inode_congested()"
deletes may_write_to_inode(), which appeared to be the one function which
took notice of PF_SWAPWRITE.  But if you study the old logic, and the
conditions under which may_write_to_inode() was called, you discover that
flag and function have been pointless for a decade.

Link: https://lkml.kernel.org/r/75e80e7-742d-e3bd-531-614db8961e4@google.com
Signed-off-by: Hugh Dickins &lt;hughd@google.com&gt;
Cc: NeilBrown &lt;neilb@suse.de&gt;
Cc: Jan Kara &lt;jack@suse.de&gt;
Cc: "Darrick J. Wong" &lt;djwong@kernel.org&gt;
Cc: Dave Chinner &lt;david@fromorbit.com&gt;
Cc: Matthew Wilcox &lt;willy@infradead.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2022-03-22T21:39:12+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-03-22T21:39:12+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=3fe2f7446f1e029b220f7f650df6d138f91651f2'/>
<id>3fe2f7446f1e029b220f7f650df6d138f91651f2</id>
<content type='text'>
Pull scheduler updates from Ingo Molnar:

 - Cleanups for SCHED_DEADLINE

 - Tracing updates/fixes

 - CPU Accounting fixes

 - First wave of changes to optimize the overhead of the scheduler
   build, from the fast-headers tree - including placeholder *_api.h
   headers for later header split-ups.

 - Preempt-dynamic using static_branch() for ARM64

 - Isolation housekeeping mask rework; preperatory for further changes

 - NUMA-balancing: deal with CPU-less nodes

 - NUMA-balancing: tune systems that have multiple LLC cache domains per
   node (eg. AMD)

 - Updates to RSEQ UAPI in preparation for glibc usage

 - Lots of RSEQ/selftests, for same

 - Add Suren as PSI co-maintainer

* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  sched/headers: ARM needs asm/paravirt_api_clock.h too
  sched/numa: Fix boot crash on arm64 systems
  headers/prep: Fix header to build standalone: &lt;linux/psi.h&gt;
  sched/headers: Only include &lt;linux/entry-common.h&gt; when CONFIG_GENERIC_ENTRY=y
  cgroup: Fix suspicious rcu_dereference_check() usage warning
  sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
  sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
  sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
  sched/deadline,rt: Remove unused functions for !CONFIG_SMP
  sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
  sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
  sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
  sched/deadline: Remove unused def_dl_bandwidth
  sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
  sched/tracing: Don't re-read p-&gt;state when emitting sched_switch event
  sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
  sched/cpuacct: Remove redundant RCU read lock
  sched/cpuacct: Optimize away RCU read lock
  sched/cpuacct: Fix charge percpu cpuusage
  sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull scheduler updates from Ingo Molnar:

 - Cleanups for SCHED_DEADLINE

 - Tracing updates/fixes

 - CPU Accounting fixes

 - First wave of changes to optimize the overhead of the scheduler
   build, from the fast-headers tree - including placeholder *_api.h
   headers for later header split-ups.

 - Preempt-dynamic using static_branch() for ARM64

 - Isolation housekeeping mask rework; preperatory for further changes

 - NUMA-balancing: deal with CPU-less nodes

 - NUMA-balancing: tune systems that have multiple LLC cache domains per
   node (eg. AMD)

 - Updates to RSEQ UAPI in preparation for glibc usage

 - Lots of RSEQ/selftests, for same

 - Add Suren as PSI co-maintainer

* tag 'sched-core-2022-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (81 commits)
  sched/headers: ARM needs asm/paravirt_api_clock.h too
  sched/numa: Fix boot crash on arm64 systems
  headers/prep: Fix header to build standalone: &lt;linux/psi.h&gt;
  sched/headers: Only include &lt;linux/entry-common.h&gt; when CONFIG_GENERIC_ENTRY=y
  cgroup: Fix suspicious rcu_dereference_check() usage warning
  sched/preempt: Tell about PREEMPT_DYNAMIC on kernel headers
  sched/topology: Remove redundant variable and fix incorrect type in build_sched_domains
  sched/deadline,rt: Remove unused parameter from pick_next_[rt|dl]_entity()
  sched/deadline,rt: Remove unused functions for !CONFIG_SMP
  sched/deadline: Use __node_2_[pdl|dle]() and rb_first_cached() consistently
  sched/deadline: Merge dl_task_can_attach() and dl_cpu_busy()
  sched/deadline: Move bandwidth mgmt and reclaim functions into sched class source file
  sched/deadline: Remove unused def_dl_bandwidth
  sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE
  sched/tracing: Don't re-read p-&gt;state when emitting sched_switch event
  sched/rt: Plug rt_mutex_setprio() vs push_rt_task() race
  sched/cpuacct: Remove redundant RCU read lock
  sched/cpuacct: Optimize away RCU read lock
  sched/cpuacct: Fix charge percpu cpuusage
  sched/headers: Reorganize, clean up and optimize kernel/sched/sched.h dependencies
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip</title>
<updated>2022-03-21T19:37:33+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2022-03-21T19:37:33+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bba90e096468a3185649e9ab75873722ae4d6f96'/>
<id>bba90e096468a3185649e9ab75873722ae4d6f96</id>
<content type='text'>
Pull core process handling RT latency updates from Thomas Gleixner:

 - Reduce the amount of work to release a task stack in context switch.
   There is no real reason to do cgroup accounting and memory freeing in
   this performance sensitive context.

   Aside of this the invoked functions cannot be called from this
   preemption disabled context on PREEMPT_RT enabled kernels. Solve this
   by moving the accounting into do_exit() and delaying the freeing of
   the stack unless the vmap stack can be cached.

 - Provide a mechanism to delay raising signals from atomic context on
   PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
   the information in the task struct and raise it in the exit path.

* tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal, x86: Delay calling signals in atomic on RT enabled kernels
  fork: Use IS_ENABLED() in account_kernel_stack()
  fork: Only cache the VMAP stack in finish_task_switch()
  fork: Move task stack accounting to do_exit()
  fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK
  fork: Don't assign the stack pointer in dup_task_struct()
  fork, IA64: Provide alloc_thread_stack_node() for IA64
  fork: Duplicate task_struct before stack allocation
  fork: Redo ifdefs around task stack handling
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull core process handling RT latency updates from Thomas Gleixner:

 - Reduce the amount of work to release a task stack in context switch.
   There is no real reason to do cgroup accounting and memory freeing in
   this performance sensitive context.

   Aside of this the invoked functions cannot be called from this
   preemption disabled context on PREEMPT_RT enabled kernels. Solve this
   by moving the accounting into do_exit() and delaying the freeing of
   the stack unless the vmap stack can be cached.

 - Provide a mechanism to delay raising signals from atomic context on
   PREEMPT_RT enabled kernels as sighand::lock cannot be acquired. Store
   the information in the task struct and raise it in the exit path.

* tag 'core-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  signal, x86: Delay calling signals in atomic on RT enabled kernels
  fork: Use IS_ENABLED() in account_kernel_stack()
  fork: Only cache the VMAP stack in finish_task_switch()
  fork: Move task stack accounting to do_exit()
  fork: Move memcg_charge_kernel_stack() into CONFIG_VMAP_STACK
  fork: Don't assign the stack pointer in dup_task_struct()
  fork, IA64: Provide alloc_thread_stack_node() for IA64
  fork: Duplicate task_struct before stack allocation
  fork: Redo ifdefs around task stack handling
</pre>
</div>
</content>
</entry>
<entry>
<title>rethook: Add a generic return hook</title>
<updated>2022-03-18T03:16:29+00:00</updated>
<author>
<name>Masami Hiramatsu</name>
<email>mhiramat@kernel.org</email>
</author>
<published>2022-03-15T14:00:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=54ecbe6f1ed5138c895bdff55608cf502755b20e'/>
<id>54ecbe6f1ed5138c895bdff55608cf502755b20e</id>
<content type='text'>
Add a return hook framework which hooks the function return. Most of the
logic came from the kretprobe, but this is independent from kretprobe.

Note that this is expected to be used with other function entry hooking
feature, like ftrace, fprobe, adn kprobes. Eventually this will replace
the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment,
this is just an additional hook.

Signed-off-by: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Tested-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a return hook framework which hooks the function return. Most of the
logic came from the kretprobe, but this is independent from kretprobe.

Note that this is expected to be used with other function entry hooking
feature, like ftrace, fprobe, adn kprobes. Eventually this will replace
the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment,
this is just an additional hook.

Signed-off-by: Masami Hiramatsu &lt;mhiramat@kernel.org&gt;
Signed-off-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Tested-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Signed-off-by: Alexei Starovoitov &lt;ast@kernel.org&gt;
Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2
</pre>
</div>
</content>
</entry>
<entry>
<title>signal, x86: Delay calling signals in atomic on RT enabled kernels</title>
<updated>2022-03-04T13:58:54+00:00</updated>
<author>
<name>Oleg Nesterov</name>
<email>oleg@redhat.com</email>
</author>
<published>2015-07-14T12:26:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=bf9ad37dc8a30cce22ae95d6c2ca6abf8731d305'/>
<id>bf9ad37dc8a30cce22ae95d6c2ca6abf8731d305</id>
<content type='text'>
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.

When CONFIG_PREEMPT_RT is enabled, spinlock_t locks become sleeping, and
one of these is the spin lock used in signal handling.

Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spinlock_t lock that has been converted to a
sleeping lock. If this happens, the above issues with the corrupted
stack is possible.

Instead of calling the signal right away, for PREEMPT_RT and x86,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.

[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT to
  ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
[bigeasy: Add on 32bit as per Yang Shi, minor rewording. ]
[ tglx: Use a config option ]

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Signed-off-by: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Link: https://lore.kernel.org/r/Ygq5aBB/qMQw6aP5@linutronix.de
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
On x86_64 we must disable preemption before we enable interrupts
for stack faults, int3 and debugging, because the current task is using
a per CPU debug stack defined by the IST. If we schedule out, another task
can come in and use the same stack and cause the stack to be corrupted
and crash the kernel on return.

When CONFIG_PREEMPT_RT is enabled, spinlock_t locks become sleeping, and
one of these is the spin lock used in signal handling.

Some of the debug code (int3) causes do_trap() to send a signal.
This function calls a spinlock_t lock that has been converted to a
sleeping lock. If this happens, the above issues with the corrupted
stack is possible.

Instead of calling the signal right away, for PREEMPT_RT and x86,
the signal information is stored on the stacks task_struct and
TIF_NOTIFY_RESUME is set. Then on exit of the trap, the signal resume
code will send the signal when preemption is enabled.

[ rostedt: Switched from #ifdef CONFIG_PREEMPT_RT to
  ARCH_RT_DELAYS_SIGNAL_SEND and added comments to the code. ]
[bigeasy: Add on 32bit as per Yang Shi, minor rewording. ]
[ tglx: Use a config option ]

Signed-off-by: Oleg Nesterov &lt;oleg@redhat.com&gt;
Signed-off-by: Steven Rostedt &lt;rostedt@goodmis.org&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Signed-off-by: Sebastian Andrzej Siewior &lt;bigeasy@linutronix.de&gt;
Signed-off-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
Link: https://lore.kernel.org/r/Ygq5aBB/qMQw6aP5@linutronix.de
</pre>
</div>
</content>
</entry>
<entry>
<title>sched/tracing: Report TASK_RTLOCK_WAIT tasks as TASK_UNINTERRUPTIBLE</title>
<updated>2022-03-01T15:18:39+00:00</updated>
<author>
<name>Valentin Schneider</name>
<email>valentin.schneider@arm.com</email>
</author>
<published>2022-01-20T16:25:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=25795ef6299f07ce3838f3253a9cb34f64efcfae'/>
<id>25795ef6299f07ce3838f3253a9cb34f64efcfae</id>
<content type='text'>
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.

The actual state is saved in p-&gt;saved_state, but reading it after reading
p-&gt;__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING

As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.

Reported-by: Uwe Kleine-König &lt;u.kleine-koenig@pengutronix.de&gt;
Signed-off-by: Valentin Schneider &lt;valentin.schneider@arm.com&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Reviewed-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Link: https://lore.kernel.org/r/20220120162520.570782-3-valentin.schneider@arm.com
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
TASK_RTLOCK_WAIT currently isn't part of TASK_REPORT, thus a task blocking
on an rtlock will appear as having a task state == 0, IOW TASK_RUNNING.

The actual state is saved in p-&gt;saved_state, but reading it after reading
p-&gt;__state has a few issues:
o that could still be TASK_RUNNING in the case of e.g. rt_spin_lock
o ttwu_state_match() might have changed that to TASK_RUNNING

As pointed out by Eric, adding TASK_RTLOCK_WAIT to TASK_REPORT implies
exposing a new state to userspace tools which way not know what to do with
them. The only information that needs to be conveyed here is that a task is
waiting on an rt_mutex, which matches TASK_UNINTERRUPTIBLE - there's no
need for a new state.

Reported-by: Uwe Kleine-König &lt;u.kleine-koenig@pengutronix.de&gt;
Signed-off-by: Valentin Schneider &lt;valentin.schneider@arm.com&gt;
Signed-off-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Reviewed-by: Steven Rostedt (Google) &lt;rostedt@goodmis.org&gt;
Link: https://lore.kernel.org/r/20220120162520.570782-3-valentin.schneider@arm.com
</pre>
</div>
</content>
</entry>
</feed>
