linux-stable.git/include/linux/raid/md_k.h, branch linux-2.6.25.y

md: clean up irregularity with raid autodetect

2008-03-05T00:35:18+00:00

When a raid1 array is stopped, all components currently get added to the list
for auto-detection.  However we should really only add components that were
found by autodetection in the first place.  So add a flag to record that
information, and use it.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

md: change ITERATE_RDEV_GENERIC to rdev_for_each_list, and remove ITERATE_RDEV_PENDING.

2008-02-06T18:41:19+00:00

Finish ITERATE_ to for_each conversion.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

md: change ITERATE_RDEV to rdev_for_each

2008-02-06T18:41:19+00:00

As this is more in line with common practice in the kernel.  Also swap the
args around to be more like list_for_each.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

md: allow devices to be shared between md arrays

2008-02-06T18:41:18+00:00

Currently, a given device is "claimed" by a particular array so that it cannot
be used by other arrays.

This is not ideal for DDF and other metadata schemes which have their own
partitioning concept.

So for externally managed metadata, just claim the device for md in general,
require that "offset" and "size" are set properly for each device, and make
sure that if a device is included in different arrays then the active sections
do not overlap.

This involves adding another flag to the rdev which makes it awkward to set
"->flags = 0" to clear certain flags.  So now clear flags explicitly by name
when we want to clear things.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

md: allow a maximum extent to be set for resyncing

2008-02-06T18:41:18+00:00

This allows userspace to control resync/reshape progress and synchronise it
with other activities, such as shared access in a SAN, or backing up critical
sections during a tricky reshape.

Writing a number of sectors (which must be a multiple of the chunk size if
such is meaningful) causes a resync to pause when it gets to that point.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

md: support 'external' metadata for md arrays

2008-02-06T18:41:18+00:00

- Add a state flag 'external' to indicate that the metadata is managed
  externally (by user-space) so important changes need to be
  left of user-space to handle.
  Alternates are non-persistant ('none') where there is no stable metadata -
  after the  array is stopped there is no record of it's status - and
  internal which can be version 0.90 or version 1.x
  These are selected by writing to the 'metadata' attribute.

- move the updating of superblocks (sync_sbs) to after we have checked if
  there are any superblocks or not.

- New array state 'write_pending'.  This means that the metadata records
  the array as 'clean', but a write has been requested, so the metadata has
  to be updated to record a 'dirty' array before the write can continue.
  This change is reported to md by writing 'active' to the array_state
  attribute.

- tidy up marking of sb_dirty:
   - don't set sb_dirty when resync finishes as md_check_recovery
     calls md_update_sb when the sync thread finishes anyway.
   - Don't set sb_dirty in multipath_run as the array might not be dirty.
   - don't mark superblock dirty when switching to 'clean' if there
     is no internal superblock (if external, userspace can choose to
     update the superblock whenever it chooses to).

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[BLOCK] Get rid of request_queue_t typedef

2007-07-24T07:28:11+00:00

Some of the code has been gradually transitioned to using the proper
struct request_queue, but there's lots left. So do a full sweet of
the kernel and get rid of this typedef and replace its uses with
the proper type.

Signed-off-by: Jens Axboe

md: improve the is_mddev_idle test fix

2007-07-17T17:23:15+00:00

Don't use 'unsigned' variable to track sync vs non-sync IO, as the only thing
we want to do with them is a signed comparison, and fix up the comment which
had become quite wrong.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Revert "md: improve partition detection in md array"

2007-05-10T01:51:36+00:00

This reverts commit 5b479c91da90eef605f851508744bfe8269591a0.

Quoth Neil Brown:

  "It causes an oops when auto-detecting raid arrays, and it doesn't
   seem easy to fix.

   The array may not be 'open' when do_md_run is called, so
   bdev->bd_disk might be NULL, so bd_set_size can oops.

   This whole approach of opening an md device before it has been
   assembled just seems to get more and more painful.  I think I'm going
   to have to come up with something clever to provide both backward
   comparability with usage expectation, and sane integration into the
   rest of the kernel."

Signed-off-by: Linus Torvalds

md: improve partition detection in md array

2007-05-09T19:30:57+00:00

md currently uses ->media_changed to make sure rescan_partitions
is call on md array after they are assembled.

However that doesn't happen until the array is opened, which is later
than some people would like.

So use blkdev_ioctl to do the rescan immediately that the
array has been assembled.

This means we can remove all the ->change infrastructure as it was only used
to trigger a partition rescan.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds