The em_x270_mci_setpower() and em_x270_usb_hub_init() functions
call regulator_enable(), which may return an error that must
be checked.

This changes the em_x270_usb_hub_init() function to bail out
if it fails, and changes the pxamci_platform_data->setpower
callback so that the a failed em_x270_mci_setpower call
can be propagated by the pxamci driver into the mmc core.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Mike Rapoport <mike@compulab.co.il>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Chris Ball <cjb@laptop.org>
[olof: fixed order of regulator_enable() and test in em_x270_usb_hub_init]
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull remoteproc fixes from Ohad Ben-Cohen:
 "Trivial remoteproc fixes by Suman Anna, Wei Yongjun and Thomas Meyer"

* tag 'remoteproc-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: Cocci spatch "memdup.spatch"
  remoteproc: free carveout memories only after unmapping them
  remoteproc/omap: fix a sparse warning
  remoteproc: fix checkpatch errors in remoteproc code
  remoteproc: fix error return code in rproc_fw_boot()

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.11:

  Core:
   - Add support for eMMC 5.1 devices
   - Add MMC_CAP_AGGRESSIVE_PM capability for aggressive power
     management of eMMC/SD between requests, using runtime PM
   - Add an ioctl to perform the eMMC 4.5 Sanitize command.  Sample code
     at:

       git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git

  Drivers:
   - dw_mmc: Add support for Rockchip's Cortex-A9 SoCs
   - dw_mmc: Add support for Altera SoCFPGAs
   - sdhci-esdhc-imx: Add support for 8-bit bus width, non-removable
     cards
   - sdhci-bcm-kona: New driver for Broadcom Kona (281xx) SoCs
   - sdhi/tmio: Add DT DMA support"

* tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (87 commits)
  mmc: bcm281xx SDHCI driver
  mmc: sdhci: add card_event callback to sdhci
  mmc: core: Fixup Oops for SDIO shutdown
  mmc: sdhci-pci: add another device id
  mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL register
  mmc: esdhc: Add support for 8-bit bus width and non-removable card
  mmc: core: production year for eMMC 4.41 and later
  mmc: omap: remove unnecessary #if 0's
  mmc: sdhci: fix ctrl_2 on super-speed selection
  mmc: dw_mmc-pltfm: add Rockchip variant
  mmc: dw_mmc-pltfm: move probe and remove below dt match table
  mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove
  mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14
  mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.
  mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA
  mmc: sdhci: fix caps2 for HS200
  sdhci-pxav3: Fix runtime PM initialization
  mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE
  mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE
  mmc: core: Enable power_off_notify for eMMC shutdown sequence
  ...

Pull pwm changes from Thierry Reding:
 "A new driver supports driving PWM signals using the TPU unit found on
  various Renesas SoCs.  Furthermore support is added for the NXP
  PCA9685 LED controller.  Another big chunk is the sysfs interface
  which has been in the works for quite some time.

  The remaining patches are a random assortment of cleanups and fixes"

* tag 'for-3.11-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare.
  pwm: pca9685: Fix wrong argument to set MODE1_SLEEP bit
  pwm: renesas-tpu: Add MODULE_ALIAS to make module auto loading work
  pwm: renesas-tpu: fix return value check in tpu_probe()
  pwm: Add Renesas TPU PWM driver
  pwm: Add sysfs interface
  pwm: Fill in missing .owner fields
  pwm: add pca9685 driver
  pwm: atmel-tcb: prepare clk before calling enable
  pwm: devm: alloc correct pointer size
  pwm: mxs: Let device core handle pinctrl
  MAINTAINERS: Update PWM subsystem entry

Pull MFD update from Samuel Ortiz:
 "For the 3.11 merge we only have one new MFD driver for the Kontron
  PLD.

  But we also have:
   - Support for the TPS659038 PMIC from the palmas driver.
   - Intel's Coleto Creek and Avoton SoCs support from the lpc_ich
     driver.
   - RTL8411B support from the rtsx driver.
   - More DT support for the Arizona, max8998, twl4030-power and the
     ti_am335x_tsadc drivers.
   - The SSBI driver move under MFD.
   - A conversion to the devm_* API for most of the MFD drivers.
   - The twl4030-power got split from twl-core into its own module.
   - A major ti_am335x_adc cleanup, leading to a proper DT support.
   - Our regular arizona and wm* updates and cleanups from the Wolfson
     folks.
   - A better error handling and initialization, and a regulator
     subdevice addition for the 88pm80x driver.
   - A bulk platform_set_drvdata() call removal that's no longer need
     since commit 0998d0631001 ("device-core: Ensure drvdata = NULL when
     no driver is bound")

* tag 'mfd-3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (102 commits)
  mfd: sec: Provide max_register to regmap
  mfd: wm8994: Remove duplicate check for active JACKDET
  MAINTAINERS: Add include directory to MFD file patterns
  mfd: sec: Remove fields not used since regmap conversion
  watchdog: Kontron PLD watchdog timer driver
  mfd: max8998: Add support for Device Tree
  regulator: max8998: Use arrays for specifying voltages in platform data
  mfd: max8998: Add irq domain support
  regulator: palmas: Add TPS659038 support
  mfd: Kontron PLD mfd driver
  mfd: palmas: Add TPS659038 PMIC support
  mfd: palmas: Add SMPS10_BOOST feature
  mfd: palmas: Check if irq is valid
  mfd: lpc_ich: iTCO_wdt patch for Intel Coleto Creek DeviceIDs
  mfd: twl-core: Change TWL6025 references to TWL6032
  mfd: davinci_voicecodec: Fix build breakage
  mfd: vexpress: Make the driver optional for arm and arm64
  mfd: htc-egpio: Use devm_ioremap_nocache() instead of ioremap_nocache()
  mfd: davinci_voicecodec: Convert to use devm_* APIs
  mfd: twl4030-power: Fix relocking on error
  ...

Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a999 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...

Pull drm updates from Dave Airlie:
 "Okay this is the big one, I was stalled on the fbdev pull req as I
  stupidly let fbdev guys merge a patch I required to fix a warning with
  some patches I had, they ended up merging the patch from the wrong
  place, but the warning should be fixed.  In future I'll just take the
  patch myself!

  Outside drm:

  There are some snd changes for the HDMI audio interactions on haswell,
  they've been acked for inclusion via my tree.  This relies on the
  wound/wait tree from Ingo which is already merged.

  Major changes:

  AMD finally released the dynamic power management code for all their
  GPUs from r600->present day, this is great, off by default for now but
  also a huge amount of code, in fact it is most of this pull request.

  Since it landed there has been a lot of community testing and Alex has
  sent a lot of fixes for any bugs found so far.  I suspect radeon might
  now be the biggest kernel driver ever :-P p.s.  radeon.dpm=1 to enable
  dynamic powermanagement for anyone.

  New drivers:

  Renesas r-car display unit.

  Other highlights:

   - core: GEM CMA prime support, use new w/w mutexs for TTM
     reservations, cursor hotspot, doc updates
   - dvo chips: chrontel 7010B support
   - i915: Haswell (fbc, ips, vecs, watermarks, audio powerwell),
     Valleyview (enabled by default, rc6), lots of pll reworking, 30bpp
     support (this time for sure)
   - nouveau: async buffer object deletion, context/register init
     updates, kernel vp2 engine support, GF117 support, GK110 accel
     support (with external nvidia ucode), context cleanups.
   - exynos: memory leak fixes, Add S3C64XX SoC series support, device
     tree updates, common clock framework support,
   - qxl: cursor hotspot support, multi-monitor support, suspend/resume
     support
   - mgag200: hw cursor support, g200 mode limiting
   - shmobile: prime support
   - tegra: fixes mostly

  I've been banging on this quite a lot due to the size of it, and it
  seems to okay on everything I've tested it on."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (811 commits)
  drm/radeon/dpm: implement vblank_too_short callback for si
  drm/radeon/dpm: implement vblank_too_short callback for cayman
  drm/radeon/dpm: implement vblank_too_short callback for btc
  drm/radeon/dpm: implement vblank_too_short callback for evergreen
  drm/radeon/dpm: implement vblank_too_short callback for 7xx
  drm/radeon/dpm: add checks against vblank time
  drm/radeon/dpm: add helper to calculate vblank time
  drm/radeon: remove stray line in old pm code
  drm/radeon/dpm: fix display_gap programming on rv7xx
  drm/nvc0/gr: fix gpc firmware regression
  drm/nouveau: fix minor thinko causing bo moves to not be async on kepler
  drm/radeon/dpm: implement force performance level for TN
  drm/radeon/dpm: implement force performance level for ON/LN
  drm/radeon/dpm: implement force performance level for SI
  drm/radeon/dpm: implement force performance level for cayman
  drm/radeon/dpm: implement force performance levels for 7xx/eg/btc
  drm/radeon/dpm: add infrastructure to force performance levels
  drm/radeon: fix surface setup on r1xx
  drm/radeon: add support for 3d perf states on older asics
  drm/radeon: set default clocks for SI when DPM is disabled
  ...

Pull slave-dmaengine updates from Vinod Koul:
 "Once you have some time from extended weekend celebrations please
  consider pulling the following to get:
   - Various fixes and PCI driver for dw_dmac by Andy
   - DT binding for imx-dma by Markus & imx-sdma by Shawn
   - DT fixes for dmaengine by Lars
   - jz4740 dmac driver by Lars
   - and various fixes across the drivers"

What "extended weekend celebrations"?  I'm in the merge window, who has
time for extended celebrations..

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (40 commits)
  DMA: shdma: add DT support
  DMA: shdma: shdma_chan_filter() has to be in shdma-base.h
  DMA: shdma: (cosmetic) don't re-calculate a pointer
  dmaengine: at_hdmac: prepare clk before calling enable
  dmaengine/trivial: at_hdmac: add curly brackets to if/else expressions
  dmaengine: at_hdmac: remove unsuded atc_cleanup_descriptors()
  dmaengine: at_hdmac: add FIFO configuration parameter to DMA DT binding
  ARM: at91: dt: add header to define at_hdmac configuration
  MIPS: jz4740: Correct clock gate bit for DMA controller
  MIPS: jz4740: Remove custom DMA API
  MIPS: jz4740: Register jz4740 DMA device
  dma: Add a jz4740 dmaengine driver
  MIPS: jz4740: Acquire and enable DMA controller clock
  dma: mmp_tdma: disable irq when disabling dma channel
  dmaengine: PL08x: Avoid collisions with get_signal() macro
  dmaengine: dw: select DW_DMAC_BIG_ENDIAN_IO automagically
  dma: dw: add PCI part of the driver
  dma: dw: split driver to library part and platform code
  dma: move dw_dmac driver to an own directory
  dw_dmac: don't check resource with devm_ioremap_resource
  ...

Peripheral handshaking identification numbers can be bigger than 15, so new
fields have been created in the CFG register.
Add macros to take this modification into account and use them in
at_dma_xlate() function.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

Adding devicetree support for imx-dma driver. Use driver name for
function 'imx_dma_is_general_purpose' because the devicename for
devicetree initialized devices is different.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>