linux-stable.git/include/linux/perf_event.h, branch v4.14.331

perf: Disallow mis-matched inherited group reads

2023-10-25T09:13:33+00:00

commit 32671e3799ca2e4590773fd0e63aaa4229e50c06 upstream.

Because group consistency is non-atomic between parent (filedesc) and children
(inherited) events, it is possible for PERF_FORMAT_GROUP read() to try and sum
non-matching counter groups -- with non-sensical results.

Add group_generation to distinguish the case where a parent group removes and
adds an event and thus has the same number, but a different configuration of
events as inherited groups.

This became a problem when commit fa8c269353d5 ("perf/core: Invert
perf_read_group() loops") flipped the order of child_list and sibling_list.
Previously it would iterate the group (sibling_list) first, and for each
sibling traverse the child_list. In this order, only the group composition of
the parent is relevant. By flipping the order the group composition of the
child (inherited) events becomes an issue and the mis-match in group
composition becomes evident.

That said; even prior to this commit, while reading of a group that is not
equally inherited was not broken, it still made no sense.

(Ab)use ECHILD as error return to indicate issues with child process group
composition.

Fixes: fa8c269353d5 ("perf/core: Invert perf_read_group() loops")
Reported-by: Budimir Markovic 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lkml.kernel.org/r/20231018115654.GK33217@noisy.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman

hw_breakpoint: fix single-stepping when using bpf_overflow_handler

2023-09-23T08:47:03+00:00

[ Upstream commit d11a69873d9a7435fe6a48531e165ab80a8b1221 ]

Arm platforms use is_default_overflow_handler() to determine if the
hw_breakpoint code should single-step over the breakpoint trigger or
let the custom handler deal with it.

Since bpf_overflow_handler() currently isn't recognized as a default
handler, attaching a BPF program to a PERF_TYPE_BREAKPOINT event causes
it to keep firing (the instruction triggering the data abort exception
is never skipped). For example:

  # bpftrace -e 'watchpoint:0x10000:4:w { print("hit") }' -c ./test
  Attaching 1 probe...
  hit
  hit
  [...]
  ^C

(./test performs a single 4-byte store to 0x10000)

This patch replaces the check with uses_default_overflow_handler(),
which accounts for the bpf_overflow_handler() case by also testing
if one of the perf_event_output functions gets invoked indirectly,
via orig_default_handler.

Signed-off-by: Tomislav Novak 
Tested-by: Samuel Gosselin  # arm64
Reviewed-by: Catalin Marinas 
Acked-by: Alexei Starovoitov 
Link: https://lore.kernel.org/linux-arm-kernel/20220923203644.2731604-1-tnovak@fb.com/
Link: https://lore.kernel.org/r/20230605191923.1219974-1-tnovak@meta.com
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

perf: Add sample_flags to indicate the PMU-filled sample data

2022-12-08T10:16:32+00:00

[ Upstream commit 3aac580d5cc3001ca1627725b3b61edb529f341d ]

On some platforms, some data e.g., timestamps, can be retrieved from
the PMU driver. Usually, the data from the PMU driver is more accurate.
The current perf kernel should output the PMU-filled sample data if
it's available.

To check the availability of the PMU-filled sample data, the current
perf kernel initializes the related fields in the
perf_sample_data_init(). When outputting a sample, the perf checks
whether the field is updated by the PMU driver. If yes, the updated
value will be output. If not, the perf uses an SW way to calculate the
value or just outputs the initialized value if an SW way is unavailable
either.

With more and more data being provided by the PMU driver, more fields
has to be initialized in the perf_sample_data_init(). That will
increase the number of cache lines touched in perf_sample_data_init()
and be harmful to the performance.

Add new "sample_flags" to indicate the PMU-filled sample data. The PMU
driver should set the corresponding PERF_SAMPLE_ flag when the field is
updated. The initialization of the corresponding field is not required
anymore. The following patches will make use of it and remove the
corresponding fields from the perf_sample_data_init(), which will
further minimize the number of cache lines touched.

Only clear the sample flags that have already been done by the PMU
driver in the perf_prepare_sample() for the PERF_RECORD_SAMPLE. For the
other PERF_RECORD_ event type, the sample data is not available.

Suggested-by: Peter Zijlstra (Intel) 
Signed-off-by: Kan Liang 
Signed-off-by: Peter Zijlstra (Intel) 
Link: https://lore.kernel.org/r/20220901130959.1285717-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin

perf/core: Fix bad use of igrab()

2020-11-18T17:28:00+00:00

commit 9511bce9fe8e5e6c0f923c09243a713eba560141 upstream

As Miklos reported and suggested:

 "This pattern repeats two times in trace_uprobe.c and in
  kernel/events/core.c as well:

      ret = kern_path(filename, LOOKUP_FOLLOW, &path);
      if (ret)
          goto fail_address_parse;

      inode = igrab(d_inode(path.dentry));
      path_put(&path);

  And it's wrong.  You can only hold a reference to the inode if you
  have an active ref to the superblock as well (which is normally
  through path.mnt) or holding s_umount.

  This way unmounting the containing filesystem while the tracepoint is
  active will give you the "VFS: Busy inodes after unmount..." message
  and a crash when the inode is finally put.

  Solution: store path instead of inode."

This patch fixes the issue in kernel/event/core.c.

Reviewed-and-tested-by: Alexander Shishkin 
Reported-by: Miklos Szeredi 
Signed-off-by: Song Liu 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Fixes: 375637bc5249 ("perf/core: Introduce address range filtering")
Link: http://lkml.kernel.org/r/20180418062907.3210386-2-songliubraving@fb.com
Signed-off-by: Ingo Molnar 
Signed-off-by: Sudip Mukherjee 
Signed-off-by: Greg Kroah-Hartman

perf/x86: Add check_period PMU callback

2019-02-20T09:20:52+00:00

commit 81ec3f3c4c4d78f2d3b6689c9816bfbdf7417dbb upstream.

Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:

  general protection fault: 0000 [#1] SMP PTI
  ...
  RIP: 0010:perf_prepare_sample+0x8f/0x510
  ...
  Call Trace:
   
   ? intel_pmu_drain_bts_buffer+0x194/0x230
   intel_pmu_drain_bts_buffer+0x160/0x230
   ? tick_nohz_irq_exit+0x31/0x40
   ? smp_call_function_single_interrupt+0x48/0xe0
   ? call_function_single_interrupt+0xf/0x20
   ? call_function_single_interrupt+0xa/0x20
   ? x86_schedule_events+0x1a0/0x2f0
   ? x86_pmu_commit_txn+0xb4/0x100
   ? find_busiest_group+0x47/0x5d0
   ? perf_event_set_state.part.42+0x12/0x50
   ? perf_mux_hrtimer_restart+0x40/0xb0
   intel_pmu_disable_event+0xae/0x100
   ? intel_pmu_disable_event+0xae/0x100
   x86_pmu_stop+0x7a/0xb0
   x86_pmu_del+0x57/0x120
   event_sched_out.isra.101+0x83/0x180
   group_sched_out.part.103+0x57/0xe0
   ctx_sched_out+0x188/0x240
   ctx_resched+0xa8/0xd0
   __perf_event_enable+0x193/0x1e0
   event_function+0x8e/0xc0
   remote_function+0x41/0x50
   flush_smp_call_function_queue+0x68/0x100
   generic_smp_call_function_single_interrupt+0x13/0x30
   smp_call_function_single_interrupt+0x3e/0xe0
   call_function_single_interrupt+0xf/0x20
   

The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.

Following sequence will cause the crash:

If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.

Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.

Reported-by: Vince Weaver 
Signed-off-by: Jiri Olsa 
Acked-by: Peter Zijlstra 
Cc: 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Naveen N. Rao 
Cc: Ravi Bangoria 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20190204123532.GA4794@krava
Signed-off-by: Ingo Molnar 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-09-04T20:56:37+00:00

Pull x86 cache quality monitoring update from Thomas Gleixner:
 "This update provides a complete rewrite of the Cache Quality
  Monitoring (CQM) facility.

  The existing CQM support was duct taped into perf with a lot of issues
  and the attempts to fix those turned out to be incomplete and
  horrible.

  After lengthy discussions it was decided to integrate the CQM support
  into the Resource Director Technology (RDT) facility, which is the
  obvious choise as in hardware CQM is part of RDT. This allowed to add
  Memory Bandwidth Monitoring support on top.

  As a result the mechanisms for allocating cache/memory bandwidth and
  the corresponding monitoring mechanisms are integrated into a single
  management facility with a consistent user interface"

* 'x86-cache-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  x86/intel_rdt: Turn off most RDT features on Skylake
  x86/intel_rdt: Add command line options for resource director technology
  x86/intel_rdt: Move special case code for Haswell to a quirk function
  x86/intel_rdt: Remove redundant ternary operator on return
  x86/intel_rdt/cqm: Improve limbo list processing
  x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
  x86/intel_rdt: Modify the intel_pqr_state for better performance
  x86/intel_rdt/cqm: Clear the default RMID during hotcpu
  x86/intel_rdt: Show bitmask of shareable resource with other executing units
  x86/intel_rdt/mbm: Handle counter overflow
  x86/intel_rdt/mbm: Add mbm counter initialization
  x86/intel_rdt/mbm: Basic counting of MBM events (total and local)
  x86/intel_rdt/cqm: Add CPU hotplug support
  x86/intel_rdt/cqm: Add sched_in support
  x86/intel_rdt: Introduce rdt_enable_key for scheduling
  x86/intel_rdt/cqm: Add mount,umount support
  x86/intel_rdt/cqm: Add rmdir support
  x86/intel_rdt: Separate the ctrl bits from rmdir
  x86/intel_rdt/cqm: Add mon_data
  x86/intel_rdt: Prepare for RDT monitor data support
  ...

perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR

2017-08-29T13:09:25+00:00

For understanding how the workload maps to memory channels and hardware
behavior, it's very important to collect address maps with physical
addresses. For example, 3D XPoint access can only be found by filtering
the physical address.

Add a new sample type for physical address.

perf already has a facility to collect data virtual address. This patch
introduces a function to convert the virtual address to physical address.
The function is quite generic and can be extended to any architecture as
long as a virtual address is provided.

 - For kernel direct mapping addresses, virt_to_phys is used to convert
   the virtual addresses to physical address.

 - For user virtual addresses, __get_user_pages_fast is used to walk the
   pages tables for user physical address.

 - This does not work for vmalloc addresses right now. These are not
   resolved, but code to do that could be added.

The new sample type requires collecting the virtual address. The
virtual address will not be output unless SAMPLE_ADDR is applied.

For security, the physical address can only be exposed to root or
privileged user.

Tested-by: Madhavan Srinivasan 
Signed-off-by: Kan Liang 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Alexander Shishkin 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Cc: acme@kernel.org
Cc: mpe@ellerman.id.au
Link: http://lkml.kernel.org/r/1503967969-48278-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar

perf/core, pt, bts: Get rid of itrace_started

2017-08-29T13:09:24+00:00

I just noticed that hw.itrace_started and hw.config are aliased to the
same location. Now, the PT driver happens to use both, which works out
fine by sheer luck:

 - STORE(hw.itrace_start) is ordered before STORE(hw.config), in the
    program order, although there are no compiler barriers to ensure that,

 - to the perf_log_itrace_start() hw.itrace_start looks set at the same
   time as when it is intended to be set because both stores happen in the
   same path,

 - hw.config is never reset to zero in the PT driver.

Now, the use of hw.config by the PT driver makes more sense (it being a
HW PMU) than messing around with itrace_started, which is an awkward API
to begin with.

This patch replaces hw.itrace_started with an attach_state bit and an
API call for the PMU drivers to use to communicate the condition.

Signed-off-by: Alexander Shishkin 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Arnaldo Carvalho de Melo 
Cc: Arnaldo Carvalho de Melo 
Cc: Jiri Olsa 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: Vince Weaver 
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20170330153956.25994-1-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar

perf/ftrace: Fix double traces of perf on ftrace:function

2017-08-29T11:29:29+00:00

When running perf on the ftrace:function tracepoint, there is a bug
which can be reproduced by:

  perf record -e ftrace:function -a sleep 20 &
  perf record -e ftrace:function ls
  perf script

              ls 10304 [005]   171.853235: ftrace:function:
  perf_output_begin
              ls 10304 [005]   171.853237: ftrace:function:
  perf_output_begin
              ls 10304 [005]   171.853239: ftrace:function:
  task_tgid_nr_ns
              ls 10304 [005]   171.853240: ftrace:function:
  task_tgid_nr_ns
              ls 10304 [005]   171.853242: ftrace:function:
  __task_pid_nr_ns
              ls 10304 [005]   171.853244: ftrace:function:
  __task_pid_nr_ns

We can see that all the function traces are doubled.

The problem is caused by the inconsistency of the register
function perf_ftrace_event_register() with the probe function
perf_ftrace_function_call(). The former registers one probe
for every perf_event. And the latter handles all perf_events
on the current cpu. So when two perf_events on the current cpu,
the traces of them will be doubled.

So this patch adds an extra parameter "event" for perf_tp_event,
only send sample data to this event when it's not NULL.

Signed-off-by: Zhou Chengming 
Reviewed-by: Jiri Olsa 
Acked-by: Steven Rostedt (VMware) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: huawei.libin@huawei.com
Link: http://lkml.kernel.org/r/1503668977-12526-1-git-send-email-zhouchengming1@huawei.com
Signed-off-by: Ingo Molnar

perf/x86: Fix RDPMC vs. mm_struct tracking

2017-08-10T10:01:08+00:00

Vince reported the following rdpmc() testcase failure:

 > Failing test case:
 >
 >	fd=perf_event_open();
 >	addr=mmap(fd);
 >	exec()  // without closing or unmapping the event
 >	fd=perf_event_open();
 >	addr=mmap(fd);
 >	rdpmc()	// GPFs due to rdpmc being disabled

The problem is of course that exec() plays tricks with what is
current->mm, only destroying the old mappings after having
installed the new mm.

Fix this confusion by passing along vma->vm_mm instead of relying on
current->mm.

Reported-by: Vince Weaver 
Tested-by: Vince Weaver 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Andy Lutomirski 
Cc: Arnaldo Carvalho de Melo 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Stephane Eranian 
Cc: Thomas Gleixner 
Cc: stable@vger.kernel.org
Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping")
Link: http://lkml.kernel.org/r/20170802173930.cstykcqefmqt7jau@hirez.programming.kicks-ass.net
[ Minor cleanups. ]
Signed-off-by: Ingo Molnar