linux-stable.git/include/linux/pci_ids.h, branch v6.5.2 Linux kernel stable tree Merge tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2023-06-30T22:06:45+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-30T22:06:45+00:00 9070577ae9d6065e447d422bdf85a09f89eaa9e8 Pull pci updates from Bjorn Helgaas: "Enumeration: - Export pcie_retrain_link() for use outside ASPM - Add Data Link Layer Link Active Reporting as another way for pcie_retrain_link() to determine the link is up - Work around link training failures (especially on the ASMedia ASM2824 switch) by training first at 2.5GT/s and then attempting higher rates Resource management: - When we coalesce host bridge windows, remove invalidated resources from the resource tree so future allocations work correctly Hotplug: - Cancel bringup sequence if card is not present, to keep from blinking Power Indicator indefinitely - Reassign bridge resources if necessary for ACPI hotplug Driver binding: - Convert platform_device .remove() callbacks to return void instead of a mostly useless int Power management: - Reduce wait time for secondary bus to be ready to speed up resume - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in D3cold - Call _REG when transitioning D-states so AML that uses the PCI config space OpRegion works, which fixes some ASMedia GPIO controllers after resume Virtualization: - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM hang when guest is rebooted - Add function 1 DMA alias quirk for Marvell 88SE9235 Error handling: - Unexport pci_save_aer_state() since it's only used in drivers/pci/ - Drop recommendation for drivers to configure AER Capability, since the PCI core does this for all devices ASPM: - Disable ASPM on MFD function removal to avoid use-after-free - Tighten up pci_enable_link_state() and pci_disable_link_state() interfaces so they don't enable/disable states the driver didn't specify - Avoid link retraining race that can happen if ASPM sets link control parameters while the link is in the midst of training for some other reason Endpoint framework: - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be different from "PCI Endpoint NTB driver" - Automatically create a function specific attributes group for endpoint drivers to avoid reference counting issues - Fix many EPC test issues - Return pci_epf_type_add_cfs() error if EPF has no driver - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq() MSI vector parameters - Pass EPF device ID to driver probe functions - Return -EALREADY if EPC has already been started/stopped - Add linkdown notifier support and use it in qcom-ep - Add Bus Master Enable event support and use it in qcom-ep - Add Qualcomm Modem Host Interface (MHI) endpoint driver - Add Layerscape PME interrupt handling to manage link-up notification Cadence PCIe controller driver: - Wait for link retrain to complete when working around the J721E i2085 erratum with Gen2 mode Faraday FTPC100 PCI controller driver: - Release clock resources on error paths Freescale i.MX6 PCIe controller driver: - Save and restore Root Port MSI control to work around hardware defect Intel VMD host bridge driver: - Reset VMD config register between soft reboots - Capture pci_reset_bus() return value instead of printing junk when it fails Qualcomm PCIe controller driver: - Add SDX65 endpoint compatible string to DT binding - Disable register write access after init for IP v2.3.3, v2.9.0 - Use DWC helpers for enabling/disabling writes to DBI registers - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2, v2.3.3, v2.7.0, v2.9.0 - Reuse v2.3.2 post-init sequence for v2.4.0 Renesas R-Car PCIe controller driver: - Remove unused static pcie_base and pcie_dev Rockchip PCIe controller driver: - Remove writes to unused registers - Write endpoint Device ID using correct register - Assert PCI Configuration Enable bit after probe so endpoint responds instead of generating Request Retry Status messages - Poll waiting for PHY PLLs to lock - Update RK3399 example DT binding to be valid - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of manually generating PCIe message - Use multiple windows to avoid address translation conflicts - Use u32 (not u16) when accessing 32-bit registers - Hide MSI-X Capability, since RK3399 can't generate MSI-X - Set endpoint controller required alignment to 256 Synopsys DesignWare PCIe controller driver: - Wait for link to come up only if we've initiated link training Miscellaneous: - Add pci_clear_master() stub for non-CONFIG_PCI" * tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) Documentation: PCI: correct spelling PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain() PCI: xgene-msi: Convert to platform remove callback returning void PCI: tegra: Convert to platform remove callback returning void PCI: rockchip-host: Convert to platform remove callback returning void PCI: mvebu: Convert to platform remove callback returning void PCI: mt7621: Convert to platform remove callback returning void PCI: mediatek-gen3: Convert to platform remove callback returning void PCI: mediatek: Convert to platform remove callback returning void PCI: iproc: Convert to platform remove callback returning void PCI: hisi-error: Convert to platform remove callback returning void PCI: dwc: Convert to platform remove callback returning void PCI: j721e: Convert to platform remove callback returning void PCI: brcmstb: Convert to platform remove callback returning void PCI: altera-msi: Convert to platform remove callback returning void PCI: altera: Convert to platform remove callback returning void PCI: aardvark: Convert to platform remove callback returning void PCI: rcar: Use correct product family name for Renesas R-Car PCI: layerscape: Add the endpoint linkup notifier support PCI: endpoint: pci-epf-vntb: Fix typo in comments ... 
Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Export pcie_retrain_link() for use outside ASPM

   - Add Data Link Layer Link Active Reporting as another way for
     pcie_retrain_link() to determine the link is up

   - Work around link training failures (especially on the ASMedia
     ASM2824 switch) by training first at 2.5GT/s and then attempting
     higher rates

  Resource management:

   - When we coalesce host bridge windows, remove invalidated resources
     from the resource tree so future allocations work correctly

  Hotplug:

   - Cancel bringup sequence if card is not present, to keep from
     blinking Power Indicator indefinitely

   - Reassign bridge resources if necessary for ACPI hotplug

  Driver binding:

   - Convert platform_device .remove() callbacks to return void instead
     of a mostly useless int

  Power management:

   - Reduce wait time for secondary bus to be ready to speed up resume

   - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
     D3cold

   - Call _REG when transitioning D-states so AML that uses the PCI
     config space OpRegion works, which fixes some ASMedia GPIO
     controllers after resume

  Virtualization:

   - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
     hang when guest is rebooted

   - Add function 1 DMA alias quirk for Marvell 88SE9235

  Error handling:

   - Unexport pci_save_aer_state() since it's only used in drivers/pci/

   - Drop recommendation for drivers to configure AER Capability, since
     the PCI core does this for all devices

  ASPM:

   - Disable ASPM on MFD function removal to avoid use-after-free

   - Tighten up pci_enable_link_state() and pci_disable_link_state()
     interfaces so they don't enable/disable states the driver didn't
     specify

   - Avoid link retraining race that can happen if ASPM sets link
     control parameters while the link is in the midst of training for
     some other reason

  Endpoint framework:

   - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
     different from "PCI Endpoint NTB driver"

   - Automatically create a function specific attributes group for
     endpoint drivers to avoid reference counting issues

   - Fix many EPC test issues

   - Return pci_epf_type_add_cfs() error if EPF has no driver

   - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
     MSI vector parameters

   - Pass EPF device ID to driver probe functions

   - Return -EALREADY if EPC has already been started/stopped

   - Add linkdown notifier support and use it in qcom-ep

   - Add Bus Master Enable event support and use it in qcom-ep

   - Add Qualcomm Modem Host Interface (MHI) endpoint driver

   - Add Layerscape PME interrupt handling to manage link-up
     notification

  Cadence PCIe controller driver:

   - Wait for link retrain to complete when working around the J721E
     i2085 erratum with Gen2 mode

  Faraday FTPC100 PCI controller driver:

   - Release clock resources on error paths

  Freescale i.MX6 PCIe controller driver:

   - Save and restore Root Port MSI control to work around hardware defect

  Intel VMD host bridge driver:

   - Reset VMD config register between soft reboots

   - Capture pci_reset_bus() return value instead of printing junk when
     it fails

  Qualcomm PCIe controller driver:

   - Add SDX65 endpoint compatible string to DT binding

   - Disable register write access after init for IP v2.3.3, v2.9.0

   - Use DWC helpers for enabling/disabling writes to DBI registers

   - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
     v2.3.3, v2.7.0, v2.9.0

   - Reuse v2.3.2 post-init sequence for v2.4.0

  Renesas R-Car PCIe controller driver:

   - Remove unused static pcie_base and pcie_dev

  Rockchip PCIe controller driver:

   - Remove writes to unused registers

   - Write endpoint Device ID using correct register

   - Assert PCI Configuration Enable bit after probe so endpoint
     responds instead of generating Request Retry Status messages

   - Poll waiting for PHY PLLs to lock

   - Update RK3399 example DT binding to be valid

   - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
     manually generating PCIe message

   - Use multiple windows to avoid address translation conflicts

   - Use u32 (not u16) when accessing 32-bit registers

   - Hide MSI-X Capability, since RK3399 can't generate MSI-X

   - Set endpoint controller required alignment to 256

  Synopsys DesignWare PCIe controller driver:

   - Wait for link to come up only if we've initiated link training

  Miscellaneous:

   - Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  Documentation: PCI: correct spelling
  PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
  PCI: xgene-msi: Convert to platform remove callback returning void
  PCI: tegra: Convert to platform remove callback returning void
  PCI: rockchip-host: Convert to platform remove callback returning void
  PCI: mvebu: Convert to platform remove callback returning void
  PCI: mt7621: Convert to platform remove callback returning void
  PCI: mediatek-gen3: Convert to platform remove callback returning void
  PCI: mediatek: Convert to platform remove callback returning void
  PCI: iproc: Convert to platform remove callback returning void
  PCI: hisi-error: Convert to platform remove callback returning void
  PCI: dwc: Convert to platform remove callback returning void
  PCI: j721e: Convert to platform remove callback returning void
  PCI: brcmstb: Convert to platform remove callback returning void
  PCI: altera-msi: Convert to platform remove callback returning void
  PCI: altera: Convert to platform remove callback returning void
  PCI: aardvark: Convert to platform remove callback returning void
  PCI: rcar: Use correct product family name for Renesas R-Car
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  ...
Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm 2023-06-29T18:00:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T18:00:17+00:00 1b722407a13b7f8658d2e26917791f32805980a2 Pull drm updates from Dave Airlie: "There is one set of patches to misc for a i915 gsc/mei proxy driver. Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots of refactoring. core: - replace strlcpy with strscpy - EDID changes to support further conversion to struct drm_edid - Move i915 DSC parameter code to common DRM helpers - Add Colorspace functionality aperture: - ignore framebuffers with non-primary devices fbdev: - use fbdev i/o helpers - add Kconfig options for fb_ops helpers - use new fb io helpers directly in drivers sysfs: - export DRM connector ID scheduler: - Avoid an infinite loop ttm: - store function table in .rodata - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() bridge: - fsl-ldb: support i.MX6SX - lt9211, lt9611: remove blanking packets - tc358768: implement input bus formats, devm cleanups - ti-snd65dsi86: implement wait_hpd_asserted - analogix: fix endless probe loop - samsung-dsim: support swapped clock, fix enabling, support var clock - display-connector: Add support for external power supply - imx: Fix module linking - tc358762: Support reset GPIO panel: - nt36523: Support Lenovo J606F - st7703: Support Anbernic RG353V-V2 - InnoLux G070ACE-L01 support - boe-tv101wum-nl6: Improve initialization - sharp-ls043t1le001: Mode fixes - simple: BOE EV121WXM-N10-1850, S6D7AA0 - Ampire AM-800480L1TMQW-T00H - Rocktech RK043FN48H - Starry himax83102-j02 - Starry ili9882t amdgpu: - add new ctx query flag to handle reset better - add new query/set shadow buffer for rdna3 - DCN 3.2/3.1.x/3.0.x updates - Enable DC_FP on loongarch - PCIe fix for RDNA2 - improve DC FAMS/SubVP support for better power management - partition support for lots of engines - Take NUMA into account when allocating memory - Add new DRM_AMDGPU_WERROR config parameter to help with CI - Initial SMU13 overdrive support - Add support for new colorspace KMS API - W=1 fixes amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions - Add debugger interface for enabling gdb - Add KFD event age tracking radeon: - Fix possible UAF i915: - new getparam for PXP support - GSC/MEI proxy driver - Meteorlake display enablement - avoid clearing preallocated framebuffers with TTM - implement framebuffer mmap support - Disable sampler indirect state in bindless heap - Enable fdinfo for GuC backends - GuC loading and firmware table handling fixes - Various refactors for multi-tile enablement - Define MOCS and PAT tables for MTL - GSC/MEI support for Meteorlake - PMU multi-tile support - Large driver kernel doc cleanup - Allow VRR toggling and arbitrary refresh rates - Support async flips on linear buffers on display ver 12+ - Expose CRTC CTM property on ILK/SNB/VLV - New debugfs for display clock frequencies - Hotplug refactoring - Display refactoring - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake - Use large rings for compute contexts - HuC loading for MTL - Allow user to set cache at BO creation - MTL powermanagement enhancements - Switch to dedicated workqueues to stop using flush_scheduled_work() - Move display runtime init under display/ - Remove 10bit gamma on desktop gen3 parts, they don't support it habanalabs: - uapi: return 0 for user queries if there was a h/w or f/w error - Add pci health check when we lose connection with the firmware. This can be used to distinguish between pci link down and firmware getting stuck. - Add more info to the error print when TPC interrupt occur. - Firmware fixes msm: - Adreno A660 bindings - SM8350 MDSS bindings fix - Added support for DPU on sm6350 and sm6375 platforms - Implemented tearcheck support to support vsync on SM150 and newer platforms - Enabled missing features (DSPP, DSC, split display) on sc8180x, sc8280xp, sm8450 - Added support for DSI and 28nm DSI PHY on MSM8226 platform - Added support for DSI on sm6350 and sm6375 platforms - Added support for display controller on MSM8226 platform - A690 GPU support - Move cmdstream dumping out of fence signaling path - a610 support - Support for a6xx devices without GMU nouveau: - NULL ptr before deref fixes armada: - implement fbdev emulation as client sun4i: - fix mipi-dsi dotclock - release clocks vc4: - rgb range toggle property - BT601 / BT2020 HDMI support vkms: - convert to drmm helpers - add reflection and rotation support - fix rgb565 conversion gma500: - fix iomem access shmobile: - support renesas soc platform - enable fbdev mxsfb: - Add support for i.MX93 LCDIF stm: - dsi: Use devm_ helper - ltdc: Fix potential invalid pointer deref renesas: - Group drivers in renesas subdirectory to prepare for new platform - Drop deprecated R-Car H3 ES1.x support meson: - Add support for MIPI DSI displays virtio: - add sync object support mediatek: - Add display binding document for MT6795" * tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits) drm/i915: Fix a NULL vs IS_ERR() bug drm/i915: make i915_drm_client_fdinfo() reference conditional again drm/i915/huc: Fix missing error code in intel_huc_init() drm/i915/gsc: take a wakeref for the proxy-init-completion check drm/msm/a6xx: Add A610 speedbin support drm/msm/a6xx: Add A619_holi speedbin support drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching drm/msm/a6xx: Use "else if" in GPU speedbin rev matching drm/msm/a6xx: Fix some A619 tunables drm/msm/a6xx: Add A610 support drm/msm/a6xx: Add support for A619_holi drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations drm/msm/a6xx: Introduce GMU wrapper support drm/msm/a6xx: Move CX GMU power counter enablement to hw_init drm/msm/a6xx: Extend and explain UBWC config drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init drm/msm/a6xx: Add a helper for software-resetting the GPU drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions() drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off() ... 
Pull drm updates from Dave Airlie:
 "There is one set of patches to misc for a i915 gsc/mei proxy driver.

  Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
  of refactoring.

  core:
   - replace strlcpy with strscpy
   - EDID changes to support further conversion to struct drm_edid
   - Move i915 DSC parameter code to common DRM helpers
   - Add Colorspace functionality

  aperture:
   - ignore framebuffers with non-primary devices

  fbdev:
   - use fbdev i/o helpers
   - add Kconfig options for fb_ops helpers
   - use new fb io helpers directly in drivers

  sysfs:
   - export DRM connector ID

  scheduler:
   - Avoid an infinite loop

  ttm:
   - store function table in .rodata
   - Add query for TTM mem limit
   - Add NUMA awareness to pools
   - Export ttm_pool_fini()

  bridge:
   - fsl-ldb: support i.MX6SX
   - lt9211, lt9611: remove blanking packets
   - tc358768: implement input bus formats, devm cleanups
   - ti-snd65dsi86: implement wait_hpd_asserted
   - analogix: fix endless probe loop
   - samsung-dsim: support swapped clock, fix enabling, support var
     clock
   - display-connector: Add support for external power supply
   - imx: Fix module linking
   - tc358762: Support reset GPIO

  panel:
   - nt36523: Support Lenovo J606F
   - st7703: Support Anbernic RG353V-V2
   - InnoLux G070ACE-L01 support
   - boe-tv101wum-nl6: Improve initialization
   - sharp-ls043t1le001: Mode fixes
   - simple: BOE EV121WXM-N10-1850, S6D7AA0
   - Ampire AM-800480L1TMQW-T00H
   - Rocktech RK043FN48H
   - Starry himax83102-j02
   - Starry ili9882t

  amdgpu:
   - add new ctx query flag to handle reset better
   - add new query/set shadow buffer for rdna3
   - DCN 3.2/3.1.x/3.0.x updates
   - Enable DC_FP on loongarch
   - PCIe fix for RDNA2
   - improve DC FAMS/SubVP support for better power management
   - partition support for lots of engines
   - Take NUMA into account when allocating memory
   - Add new DRM_AMDGPU_WERROR config parameter to help with CI
   - Initial SMU13 overdrive support
   - Add support for new colorspace KMS API
   - W=1 fixes

  amdkfd:
   - Query TTM mem limit rather than hardcoding it
   - GC 9.4.3 partition support
   - Handle NUMA for partitions
   - Add debugger interface for enabling gdb
   - Add KFD event age tracking

  radeon:
   - Fix possible UAF

  i915:
   - new getparam for PXP support
   - GSC/MEI proxy driver
   - Meteorlake display enablement
   - avoid clearing preallocated framebuffers with TTM
   - implement framebuffer mmap support
   - Disable sampler indirect state in bindless heap
   - Enable fdinfo for GuC backends
   - GuC loading and firmware table handling fixes
   - Various refactors for multi-tile enablement
   - Define MOCS and PAT tables for MTL
   - GSC/MEI support for Meteorlake
   - PMU multi-tile support
   - Large driver kernel doc cleanup
   - Allow VRR toggling and arbitrary refresh rates
   - Support async flips on linear buffers on display ver 12+
   - Expose CRTC CTM property on ILK/SNB/VLV
   - New debugfs for display clock frequencies
   - Hotplug refactoring
   - Display refactoring
   - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
   - Use large rings for compute contexts
   - HuC loading for MTL
   - Allow user to set cache at BO creation
   - MTL powermanagement enhancements
   - Switch to dedicated workqueues to stop using flush_scheduled_work()
   - Move display runtime init under display/
   - Remove 10bit gamma on desktop gen3 parts, they don't support it

  habanalabs:
   - uapi: return 0 for user queries if there was a h/w or f/w error
   - Add pci health check when we lose connection with the firmware.
     This can be used to distinguish between pci link down and firmware
     getting stuck.
   - Add more info to the error print when TPC interrupt occur.
   - Firmware fixes

  msm:
   - Adreno A660 bindings
   - SM8350 MDSS bindings fix
   - Added support for DPU on sm6350 and sm6375 platforms
   - Implemented tearcheck support to support vsync on SM150 and newer
     platforms
   - Enabled missing features (DSPP, DSC, split display) on sc8180x,
     sc8280xp, sm8450
   - Added support for DSI and 28nm DSI PHY on MSM8226 platform
   - Added support for DSI on sm6350 and sm6375 platforms
   - Added support for display controller on MSM8226 platform
   - A690 GPU support
   - Move cmdstream dumping out of fence signaling path
   - a610 support
   - Support for a6xx devices without GMU

  nouveau:
   - NULL ptr before deref fixes

  armada:
   - implement fbdev emulation as client

  sun4i:
   - fix mipi-dsi dotclock
   - release clocks

  vc4:
   - rgb range toggle property
   - BT601 / BT2020 HDMI support

  vkms:
   - convert to drmm helpers
   - add reflection and rotation support
   - fix rgb565 conversion

  gma500:
   - fix iomem access

  shmobile:
   - support renesas soc platform
   - enable fbdev

  mxsfb:
   - Add support for i.MX93 LCDIF

  stm:
   - dsi: Use devm_ helper
   - ltdc: Fix potential invalid pointer deref

  renesas:
   - Group drivers in renesas subdirectory to prepare for new platform
   - Drop deprecated R-Car H3 ES1.x support

  meson:
   - Add support for MIPI DSI displays

  virtio:
   - add sync object support

  mediatek:
   - Add display binding document for MT6795"

* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
  drm/i915: Fix a NULL vs IS_ERR() bug
  drm/i915: make i915_drm_client_fdinfo() reference conditional again
  drm/i915/huc: Fix missing error code in intel_huc_init()
  drm/i915/gsc: take a wakeref for the proxy-init-completion check
  drm/msm/a6xx: Add A610 speedbin support
  drm/msm/a6xx: Add A619_holi speedbin support
  drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
  drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
  drm/msm/a6xx: Fix some A619 tunables
  drm/msm/a6xx: Add A610 support
  drm/msm/a6xx: Add support for A619_holi
  drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  drm/msm/a6xx: Introduce GMU wrapper support
  drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
  drm/msm/a6xx: Extend and explain UBWC config
  drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
  drm/msm/a6xx: Add a helper for software-resetting the GPU
  drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  ...
Merge tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound 2023-06-29T17:46:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-29T17:46:47+00:00 f8824e151fbfa0ac0a258015d606ea6f4a10251b Pull sound updates from Takashi Iwai: "Lots of changes as usual, but the only significant stuff in ALSA core part is the MIDI 2.0 support, while ASoC core kept receiving the code refactoring. The majority of changes are seen rather in device drivers, and quite a few new drivers can be found there. Here we go, some highlights: ALSA and ASoC Core: - Support of MIDI 2.0 devices: rawmidi and sequencer API have been extended for the support of the new UMP (Universal MIDI Packet) protocol, USB audio driver got the USB MIDI 2.0 interface support - Continued refactoring around ASoC DAI links and the ordering of trigger callbacks - PCM ABI extension for better drain support ASoC Drivers: - Conversions of many drivers to use maple tree based caches - Everlasting improvement works on ASoC Intel drivers - Compressed audio support for Qualcomm - Support for AMD SoundWire, Analog Devices SSM3515, Google Chameleon, Ingenic X1000, Intel systems with various CODECs, Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive JH7110, Texas Instruments TAS2781 HD-audio: - Quirks for HP and ASUS machines - CS35L41 HD-audio codec fixes - Loongson HD-audio support Misc: - A new virtual PCM test driver for kselftests - Continued refactoring and improvements on the legacy emu10k1 driver" * tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits) ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ASoC: hdmi-codec: fix channel info for compressed formats ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats ASoC: core: Always store of_node when getting DAI link component ASoC: tas2781: Fix error code in tas2781_load_calibration() ASoC: amd: update pm_runtime enable sequence ALSA: ump: Export MIDI1 / UMP conversion helpers ASoC: tas2781: fix Kconfig dependencies ASoC: amd: acp: remove acp poweroff function ASoC: amd: acp: clear pdm dma interrupt mask ASoC: codecs: max98090: Allow dsp_a mode ASoC: qcom: common: add default jack dapm pins ASoC: loongson: fix address space confusion ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints ASoC: tegra: Remove stale comments in AHUB ASoC: tegra: Use normal system sleep for ASRC ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio ASoC: fsl-asoc-card: Allow passing the number of slots in use ASoC: codecs: wsa884x: Add WSA884x family of speakers ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers ... 
Pull sound updates from Takashi Iwai:
 "Lots of changes as usual, but the only significant stuff in ALSA core
  part is the MIDI 2.0 support, while ASoC core kept receiving the code
  refactoring. The majority of changes are seen rather in device
  drivers, and quite a few new drivers can be found there.

  Here we go, some highlights:

  ALSA and ASoC Core:
   - Support of MIDI 2.0 devices: rawmidi and sequencer API have been
     extended for the support of the new UMP (Universal MIDI Packet)
     protocol, USB audio driver got the USB MIDI 2.0 interface support
   - Continued refactoring around ASoC DAI links and the ordering of
     trigger callbacks
   - PCM ABI extension for better drain support

  ASoC Drivers:
   - Conversions of many drivers to use maple tree based caches
   - Everlasting improvement works on ASoC Intel drivers
   - Compressed audio support for Qualcomm
   - Support for AMD SoundWire, Analog Devices SSM3515, Google
     Chameleon, Ingenic X1000, Intel systems with various CODECs,
     Loongson platforms, Maxim MAX98388, Mediatek MT8188, Nuvoton
     NAU8825C, NXP platforms with NAU8822, Qualcomm WSA884x, StarFive
     JH7110, Texas Instruments TAS2781

  HD-audio:
   - Quirks for HP and ASUS machines
   - CS35L41 HD-audio codec fixes
   - Loongson HD-audio support

  Misc:
   - A new virtual PCM test driver for kselftests
   - Continued refactoring and improvements on the legacy emu10k1
     driver"

* tag 'sound-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (556 commits)
  ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook
  ASoC: hdmi-codec: fix channel info for compressed formats
  ALSA: pcm: fix ELD constraints for (E)AC3, DTS(-HD) and MLP formats
  ASoC: core: Always store of_node when getting DAI link component
  ASoC: tas2781: Fix error code in tas2781_load_calibration()
  ASoC: amd: update pm_runtime enable sequence
  ALSA: ump: Export MIDI1 / UMP conversion helpers
  ASoC: tas2781: fix Kconfig dependencies
  ASoC: amd: acp: remove acp poweroff function
  ASoC: amd: acp: clear pdm dma interrupt mask
  ASoC: codecs: max98090: Allow dsp_a mode
  ASoC: qcom: common: add default jack dapm pins
  ASoC: loongson: fix address space confusion
  ASoC: dt-bindings: microchip,sama7g5-pdmc: Simplify "microchip,mic-pos" constraints
  ASoC: tegra: Remove stale comments in AHUB
  ASoC: tegra: Use normal system sleep for ASRC
  ALSA: hda/realtek: Add quirks for ROG ALLY CS35l41 audio
  ASoC: fsl-asoc-card: Allow passing the number of slots in use
  ASoC: codecs: wsa884x: Add WSA884x family of speakers
  ASoC: dt-bindings: qcom,wsa8840: Add WSA884x family of speakers
  ...
Merge branch 'pci/misc' 2023-06-26T17:59:57+00:00 Bjorn Helgaas bhelgaas@google.com 2023-06-26T17:59:57+00:00 30fec3b884589b6cd9f441c139220c5eb2ed55d3 - Add pci_clear_master() stub for non-CONFIG_PCI (Sui Jingfeng) - Correct documentation typos (Randy Dunlap) * pci/misc: Documentation: PCI: correct spelling PCI: Add pci_clear_master() stub for non-CONFIG_PCI PCI: Expand comment about sorting pci_ids.h entries 
- Add pci_clear_master() stub for non-CONFIG_PCI (Sui Jingfeng)

- Correct documentation typos (Randy Dunlap)

* pci/misc:
  Documentation: PCI: correct spelling
  PCI: Add pci_clear_master() stub for non-CONFIG_PCI
  PCI: Expand comment about sorting pci_ids.h entries
Merge tag 'amd-drm-next-6.5-2023-06-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next 2023-06-15T04:11:22+00:00 Dave Airlie airlied@redhat.com 2023-06-15T04:11:22+00:00 901bdf5ea1a836400ee69aa32b04e9c209271ec7 amd-drm-next-6.5-2023-06-02: amdgpu: - SR-IOV fixes - Warning fixes - Misc code cleanups and spelling fixes - DCN 3.2 updates - Improved DC FAMS support for better power management - Improved DC SubVP support for better power management - DCN 3.1.x fixes - Max IB size query - DC GPU reset fixes - RAS updates - DCN 3.0.x fixes - S/G display fixes - CP shadow buffer support - Implement connector force callback - Z8 power improvements - PSP 13.0.10 vbflash support - Mode2 reset fixes - Store MQDs in VRAM to improve queue switch latency - VCN 3.x fixes - JPEG 3.x fixes - Enable DC_FP on LoongArch - GFXOFF fixes - GC 9.4.3 partition support - SDMA 4.4.2 partition support - VCN/JPEG 4.0.3 partition support - VCN 4.0.3 updates - NBIO 7.9 updates - GC 9.4.3 updates - Take NUMA into account when allocating memory - Handle NUMA for partitions - SMU 13.0.6 updates - GC 9.4.3 RAS updates - Stop including unused swiotlb.h - SMU 13.0.7 fixes - Fix clock output ordering on some APUs - Clean up DC FPGA code - GFX9 preemption fixes - Misc irq fixes - S0ix fixes - Add new DRM_AMDGPU_WERROR config parameter to help with CI - PCIe fix for RDNA2 - kdoc fixes - Documentation updates amdkfd: - Query TTM mem limit rather than hardcoding it - GC 9.4.3 partition support - Handle NUMA for partitions radeon: - Fix possible double free - Stop including unused swiotlb.h - Fix possible division by zero ttm: - Add query for TTM mem limit - Add NUMA awareness to pools - Export ttm_pool_fini() UAPI: - Add new ctx query flag to better handle GPU resets Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290 - Add new interface to query and set shadow buffer for RDNA3 Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986 - Add new INFO query for max IB size Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3 amd-drm-next-6.5-2023-06-09: amdgpu: - S0ix fixes - Initial SMU13 Overdrive support - kdoc fixes - Misc clode cleanups - Flexible array fixes - Display OTG fixes - SMU 13.0.6 updates - Revert some broken clock counter updates - Misc display fixes - GFX9 preemption fixes - Add support for newer EEPROM bad page table format - Add missing radeon secondary id - Add support for new colorspace KMS API - CSA fix - Stable pstate fixes for APUs - make vbl interface admin only - Handle PCI accelerator class amdkfd: - Add debugger support for gdb radeon: - Fix possible UAF drm: - Add Colorspace functionality UAPI: - Add debugger interface for enabling gdb Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi - Add KMS colorspace API Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com 
amd-drm-next-6.5-2023-06-02:

amdgpu:
- SR-IOV fixes
- Warning fixes
- Misc code cleanups and spelling fixes
- DCN 3.2 updates
- Improved DC FAMS support for better power management
- Improved DC SubVP support for better power management
- DCN 3.1.x fixes
- Max IB size query
- DC GPU reset fixes
- RAS updates
- DCN 3.0.x fixes
- S/G display fixes
- CP shadow buffer support
- Implement connector force callback
- Z8 power improvements
- PSP 13.0.10 vbflash support
- Mode2 reset fixes
- Store MQDs in VRAM to improve queue switch latency
- VCN 3.x fixes
- JPEG 3.x fixes
- Enable DC_FP on LoongArch
- GFXOFF fixes
- GC 9.4.3 partition support
- SDMA 4.4.2 partition support
- VCN/JPEG 4.0.3 partition support
- VCN 4.0.3 updates
- NBIO 7.9 updates
- GC 9.4.3 updates
- Take NUMA into account when allocating memory
- Handle NUMA for partitions
- SMU 13.0.6 updates
- GC 9.4.3 RAS updates
- Stop including unused swiotlb.h
- SMU 13.0.7 fixes
- Fix clock output ordering on some APUs
- Clean up DC FPGA code
- GFX9 preemption fixes
- Misc irq fixes
- S0ix fixes
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- PCIe fix for RDNA2
- kdoc fixes
- Documentation updates

amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions

radeon:
- Fix possible double free
- Stop including unused swiotlb.h
- Fix possible division by zero

ttm:
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()

UAPI:
- Add new ctx query flag to better handle GPU resets
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290
- Add new interface to query and set shadow buffer for RDNA3
  Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986
- Add new INFO query for max IB size
  Proposed userspace: https://gitlab.freedesktop.org/bnieuwenhuizen/mesa/-/commits/ib-rejection-v3

amd-drm-next-6.5-2023-06-09:

amdgpu:
- S0ix fixes
- Initial SMU13 Overdrive support
- kdoc fixes
- Misc clode cleanups
- Flexible array fixes
- Display OTG fixes
- SMU 13.0.6 updates
- Revert some broken clock counter updates
- Misc display fixes
- GFX9 preemption fixes
- Add support for newer EEPROM bad page table format
- Add missing radeon secondary id
- Add support for new colorspace KMS API
- CSA fix
- Stable pstate fixes for APUs
- make vbl interface admin only
- Handle PCI accelerator class

amdkfd:
- Add debugger support for gdb

radeon:
- Fix possible UAF

drm:
- Add Colorspace functionality

UAPI:
- Add debugger interface for enabling gdb
  Proposed userspace: https://github.com/ROCm-Developer-Tools/ROCdbgapi/tree/wip-dbgapi
- Add KMS colorspace API
  Discussion: https://lists.freedesktop.org/archives/dri-devel/2023-June/408128.html

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609174817.7764-1-alexander.deucher@amd.com
drm/amdgpu: add the accelerator PCIe class 2023-06-09T16:48:57+00:00 Shiwu Zhang shiwu.zhang@amd.com 2023-05-23T04:02:32+00:00 9d65b1b4bcf3918164e17365eec169875eef8ee3 Add the accelerator PCIe class and match the class in amdgpu for 0x1002 devices of that class. From PCI spec: "PCI Code and ID Assignment, r1.9, sec 1, 1.19" Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Signed-off-by: Alex Deucher <alexander.deucher@amd.com> 
Add the accelerator PCIe class and match the
class in amdgpu for 0x1002 devices of that class.

From PCI spec:
"PCI Code and ID Assignment, r1.9, sec 1, 1.19"

Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # pci_ids.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ALSA: hda: Add Loongson LS7A HD-Audio support 2023-06-07T10:36:38+00:00 Yanteng Si siyanteng@loongson.cn 2023-06-07T09:21:49+00:00 28bd137a3c8e105587ba8c55b68ef43b519b270f Add the new PCI ID 0x0014 0x7a07 and the new PCI ID 0x0014 0x7a37 Loongson HDA controller. Signed-off-by: Yanteng Si <siyanteng@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Link: https://lore.kernel.org/r/993587483b9509796b29a416f257fcfb4b15c6ea.1686128807.git.siyanteng@loongson.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> 
Add the new PCI ID 0x0014 0x7a07 and the new PCI ID 0x0014 0x7a37
Loongson HDA controller.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/993587483b9509796b29a416f257fcfb4b15c6ea.1686128807.git.siyanteng@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
x86/amd_nb: Add MI200 PCI IDs 2023-06-05T10:26:37+00:00 Yazen Ghannam yazen.ghannam@amd.com 2023-05-15T11:35:33+00:00 e15885689cf4bc92356e52ea6ef38379a749819a The AMD MI200 series accelerators are data center GPUs. They include unified memory controllers and a data fabric similar to those used in AMD x86 CPU products. The memory controllers report errors using MCA, though these errors are generally handled through GPU drivers that directly manage the accelerator device. In some configurations, memory errors from these devices will be reported through MCA and managed by x86 CPUs. The OS is expected to handle these errors in similar fashion to MCA errors originating from memory controllers on the CPUs. In Linux, this flow includes passing MCA errors to a notifier chain with handlers in the EDAC subsystem. The AMD64 EDAC module requires information from the memory controllers and data fabric in order to provide detailed decoding of memory errors. The information is read from hardware registers accessed through interfaces in the data fabric. The accelerator data fabrics are visible to the host x86 CPUs as PCI devices just like x86 CPU data fabrics are already. However, the accelerator fabrics have new and unique PCI IDs. Add PCI IDs for the MI200 series of accelerator devices in order to enable EDAC support. The data fabrics of the accelerator devices will be enumerated as any other fabric already supported. System-specific implementation details will be handled within the AMD64 EDAC module. [ bp: Scrub off marketing speak. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com> Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230515113537.1052146-2-muralimk@amd.com 
The AMD MI200 series accelerators are data center GPUs. They include
unified memory controllers and a data fabric similar to those used in
AMD x86 CPU products. The memory controllers report errors using MCA,
though these errors are generally handled through GPU drivers that
directly manage the accelerator device.

In some configurations, memory errors from these devices will be
reported through MCA and managed by x86 CPUs. The OS is expected to
handle these errors in similar fashion to MCA errors originating from
memory controllers on the CPUs. In Linux, this flow includes passing MCA
errors to a notifier chain with handlers in the EDAC subsystem.

The AMD64 EDAC module requires information from the memory controllers
and data fabric in order to provide detailed decoding of memory errors.
The information is read from hardware registers accessed through
interfaces in the data fabric.

The accelerator data fabrics are visible to the host x86 CPUs as PCI
devices just like x86 CPU data fabrics are already. However, the
accelerator fabrics have new and unique PCI IDs.

Add PCI IDs for the MI200 series of accelerator devices in order to
enable EDAC support. The data fabrics of the accelerator devices will be
enumerated as any other fabric already supported.  System-specific
implementation details will be handled within the AMD64 EDAC module.

  [ bp: Scrub off marketing speak. ]

Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230515113537.1052146-2-muralimk@amd.com
PCI: Expand comment about sorting pci_ids.h entries 2023-05-31T17:26:46+00:00 Bjorn Helgaas bhelgaas@google.com 2023-04-18T21:13:00+00:00 d3c6e265681285e046e0725dcbf5465482371e62 Clarify the request to sort Vendor ID and Device ID entries by numeric value, not alphabetically. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Clarify the request to sort Vendor ID and Device ID entries by numeric
value, not alphabetically.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
PCI: Delay after FLR of Solidigm P44 Pro NVMe 2023-05-09T21:45:19+00:00 Mike Pastore mike@oobak.org 2023-05-07T07:35:19+00:00 0ac448e0d29d6ba978684b3fa2e3ac7294ec2475 Prevent KVM hang when a Solidgm P44 Pro NVMe is passed through to a guest via IOMMU and the guest is subsequently rebooted. A similar issue was identified and patched by 51ba09452d11 ("PCI: Delay after FLR of Intel DC P3700 NVMe") and the same fix can be applied for this case. (Intel spun off their NAND and SSD business as Solidigm and sold it to SK Hynix in late 2021.) Link: https://lore.kernel.org/r/20230507073519.9737-1-mike@oobak.org Signed-off-by: Mike Pastore <mike@oobak.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> 
Prevent KVM hang when a Solidgm P44 Pro NVMe is passed through to a guest
via IOMMU and the guest is subsequently rebooted.

A similar issue was identified and patched by 51ba09452d11 ("PCI: Delay
after FLR of Intel DC P3700 NVMe") and the same fix can be applied for this
case. (Intel spun off their NAND and SSD business as Solidigm and sold it
to SK Hynix in late 2021.)

Link: https://lore.kernel.org/r/20230507073519.9737-1-mike@oobak.org
Signed-off-by: Mike Pastore <mike@oobak.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>