<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/include/linux/pci_ids.h, branch v5.3.3</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma</title>
<updated>2019-07-17T16:55:43+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-07-17T16:55:43+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=47ebe00b684c2bc183a766bc33c8b5943bc0df85'/>
<id>47ebe00b684c2bc183a766bc33c8b5943bc0df85</id>
<content type='text'>
Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish -&gt;remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull dmaengine updates from Vinod Koul:

 - Add support in dmaengine core to do device node checks for DT devices
   and update bunch of drivers to use that and remove open coding from
   drivers

 - New driver/driver support for new hardware, namely:
     - MediaTek UART APDMA
     - Freescale i.mx7ulp edma2
     - Synopsys eDMA IP core version 0
     - Allwinner H6 DMA

 - Updates to axi-dma and support for interleaved cyclic transfers

 - Greg's debugfs return value check removals on drivers

 - Updates to stm32-dma, hsu, dw, pl330, tegra drivers

* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
  dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
  Documentation: dmaengine: clean up description of dmatest usage
  dmaengine: tegra210-adma: remove PM_CLK dependency
  dmaengine: fsl-edma: add i.mx7ulp edma2 version support
  dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
  dmaengine: fsl-edma-common: version check for v2 instead
  dmaengine: fsl-edma-common: move dmamux register to another single function
  dmaengine: fsl-edma: add drvdata for fsl-edma
  dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
  dmaengine: rcar-dmac: Reject zero-length slave DMA requests
  dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw-edma: fix semicolon.cocci warnings
  dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
  dmaengine: dmatest: timeout value of -1 should specify infinite wait
  dmaengine: dw: Distinguish -&gt;remove() between DW and iDMA 32-bit
  dmaengine: fsl-edma: support little endian for edma driver
  dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
  dmagengine: pl330: add code to get reset property
  dt-bindings: pl330: document the optional resets property
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'pci/trivial'</title>
<updated>2019-07-12T22:08:41+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2019-07-12T22:08:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7b4b0f6b34d893be569da81ffad865a9d3a7d014'/>
<id>7b4b0f6b34d893be569da81ffad865a9d3a7d014</id>
<content type='text'>
  - Fix typos and whitespace errors (Bjorn Helgaas)

* pci/trivial:
  PCI: Fix typos and whitespace errors
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
  - Fix typos and whitespace errors (Bjorn Helgaas)

* pci/trivial:
  PCI: Fix typos and whitespace errors
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Enable NVIDIA HDA controllers</title>
<updated>2019-07-11T16:13:26+00:00</updated>
<author>
<name>Lukas Wunner</name>
<email>lukas@wunner.de</email>
</author>
<published>2019-07-08T05:17:44+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b516ea586d717472178e6ef1c152e85608b0ce32'/>
<id>b516ea586d717472178e6ef1c152e85608b0ce32</id>
<content type='text'>
Many NVIDIA GPUs can be configured as either a single-function video device
or a multi-function device with video at function 0 and an HDA audio
controller at function 1.  The HDA controller can be enabled or disabled by
a bit in the function 0 config space.

Some BIOSes leave the HDA disabled, which means the HDMI connector from the
NVIDIA GPU may not work.  Sometimes the BIOS enables the HDA if an HDMI
cable is connected at boot time, but that doesn't handle hotplug cases.

Enable the HDA controller on device enumeration and resume and re-read the
header type, which tells us whether the GPU is a multi-function device.

This quirk is limited to NVIDIA PCI devices with the VGA Controller device
class.  This is expected to correspond to product configurations where the
NVIDIA GPU has connectors attached.  Other products where the device class
is 3D Controller are expected to correspond to configurations where the
NVIDIA GPU is dedicated (dGPU) and has no connectors.  See original post
(URL below) for more details.

This commit takes inspiration from an earlier patch by Daniel Drake.

Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2
Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1
Link: https://devtalk.nvidia.com/default/topic/1024022
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985
Signed-off-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Signed-off-by: Daniel Drake &lt;drake@endlessm.com&gt;
[bhelgaas: commit log, log message, return early if already enabled]
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Aaron Plattner &lt;aplattner@nvidia.com&gt;
Cc: Peter Wu &lt;peter@lekensteyn.nl&gt;
Cc: Ilia Mirkin &lt;imirkin@alum.mit.edu&gt;
Cc: Karol Herbst &lt;kherbst@redhat.com&gt;
Cc: Maik Freudenberg &lt;hhfeuer@gmx.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Many NVIDIA GPUs can be configured as either a single-function video device
or a multi-function device with video at function 0 and an HDA audio
controller at function 1.  The HDA controller can be enabled or disabled by
a bit in the function 0 config space.

Some BIOSes leave the HDA disabled, which means the HDMI connector from the
NVIDIA GPU may not work.  Sometimes the BIOS enables the HDA if an HDMI
cable is connected at boot time, but that doesn't handle hotplug cases.

Enable the HDA controller on device enumeration and resume and re-read the
header type, which tells us whether the GPU is a multi-function device.

This quirk is limited to NVIDIA PCI devices with the VGA Controller device
class.  This is expected to correspond to product configurations where the
NVIDIA GPU has connectors attached.  Other products where the device class
is 3D Controller are expected to correspond to configurations where the
NVIDIA GPU is dedicated (dGPU) and has no connectors.  See original post
(URL below) for more details.

This commit takes inspiration from an earlier patch by Daniel Drake.

Link: https://lore.kernel.org/r/20190708051744.24039-1-drake@endlessm.com v2
Link: https://lore.kernel.org/r/20190613063514.15317-1-drake@endlessm.com v1
Link: https://devtalk.nvidia.com/default/topic/1024022
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75985
Signed-off-by: Lukas Wunner &lt;lukas@wunner.de&gt;
Signed-off-by: Daniel Drake &lt;drake@endlessm.com&gt;
[bhelgaas: commit log, log message, return early if already enabled]
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Aaron Plattner &lt;aplattner@nvidia.com&gt;
Cc: Peter Wu &lt;peter@lekensteyn.nl&gt;
Cc: Ilia Mirkin &lt;imirkin@alum.mit.edu&gt;
Cc: Karol Herbst &lt;kherbst@redhat.com&gt;
Cc: Maik Freudenberg &lt;hhfeuer@gmx.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Fix typos and whitespace errors</title>
<updated>2019-07-09T12:24:53+00:00</updated>
<author>
<name>Bjorn Helgaas</name>
<email>bhelgaas@google.com</email>
</author>
<published>2019-05-30T13:05:58+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f6b6aefee70aa5261deec7feab80c249bf58397f'/>
<id>f6b6aefee70aa5261deec7feab80c249bf58397f</id>
<content type='text'>
Fix typos in drivers/pci.  Comment and whitespace changes only.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Reviewed-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Fix typos in drivers/pci.  Comment and whitespace changes only.

Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Reviewed-by: Randy Dunlap &lt;rdunlap@infradead.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Add Synopsys endpoint EDDA Device ID</title>
<updated>2019-06-10T07:40:39+00:00</updated>
<author>
<name>Gustavo Pimentel</name>
<email>Gustavo.Pimentel@synopsys.com</email>
</author>
<published>2019-06-04T13:29:25+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=1f418f46503d72594bbe6407d97fd2ae1ce15ee6'/>
<id>1f418f46503d72594bbe6407d97fd2ae1ce15ee6</id>
<content type='text'>
Create and add Synopsys Endpoint EDDA Device ID to PCI ID list, since
this ID is now being use on two different drivers (pci_endpoint_test.ko
and dw-edma-pcie.ko).

Signed-off-by: Gustavo Pimentel &lt;gustavo.pimentel@synopsys.com&gt;
Acked-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Kishon Vijay Abraham I &lt;kishon@ti.com&gt;
Cc: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Lorenzo Pieralisi &lt;lorenzo.pieralisi@arm.com&gt;
Cc: Joao Pinto &lt;jpinto@synopsys.com&gt;
Signed-off-by: Vinod Koul &lt;vkoul@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Create and add Synopsys Endpoint EDDA Device ID to PCI ID list, since
this ID is now being use on two different drivers (pci_endpoint_test.ko
and dw-edma-pcie.ko).

Signed-off-by: Gustavo Pimentel &lt;gustavo.pimentel@synopsys.com&gt;
Acked-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Kishon Vijay Abraham I &lt;kishon@ti.com&gt;
Cc: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Cc: Lorenzo Pieralisi &lt;lorenzo.pieralisi@arm.com&gt;
Cc: Joao Pinto &lt;jpinto@synopsys.com&gt;
Signed-off-by: Vinod Koul &lt;vkoul@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Move Rohm Vendor ID to generic list</title>
<updated>2019-02-01T23:24:52+00:00</updated>
<author>
<name>Andy Shevchenko</name>
<email>andriy.shevchenko@linux.intel.com</email>
</author>
<published>2019-02-01T23:24:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0ce26a1c31ca928df4dfc7504c8898b71ff9f5d5'/>
<id>0ce26a1c31ca928df4dfc7504c8898b71ff9f5d5</id>
<content type='text'>
Move the Rohm Vendor ID to pci_ids.h instead of defining it in several
drivers.

Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move the Rohm Vendor ID to pci_ids.h instead of defining it in several
drivers.

Signed-off-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Mark Brown &lt;broonie@kernel.org&gt;
Acked-by: Linus Walleij &lt;linus.walleij@linaro.org&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Add HXT vendor ID</title>
<updated>2019-02-01T23:11:42+00:00</updated>
<author>
<name>Shunyong Yang</name>
<email>shunyong.yang@hxt-semitech.com</email>
</author>
<published>2019-02-01T23:11:14+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b8580e9de48bf32b884910d22330ef2fa027cf01'/>
<id>b8580e9de48bf32b884910d22330ef2fa027cf01</id>
<content type='text'>
Add the HXT vendor ID to pci_ids.h.

Signed-off-by: Shunyong Yang &lt;shunyong.yang@hxt-semitech.com&gt;
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Sinan Kaya &lt;okaya@kernel.org&gt;
CC: Joey Zheng &lt;yu.zheng@hxt-semitech.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the HXT vendor ID to pci_ids.h.

Signed-off-by: Shunyong Yang &lt;shunyong.yang@hxt-semitech.com&gt;
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Reviewed-by: Sinan Kaya &lt;okaya@kernel.org&gt;
CC: Joey Zheng &lt;yu.zheng@hxt-semitech.com&gt;</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci</title>
<updated>2019-01-06T01:57:34+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2019-01-06T01:57:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=926b02d3eb547daa1d56cf9b586f31b270488b77'/>
<id>926b02d3eb547daa1d56cf9b586f31b270488b77</id>
<content type='text'>
Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull PCI updates from Bjorn Helgaas:

 - Remove unused lists from ASPM pcie_link_state (Frederick Lawler)

 - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian
   King)

 - Expand Kconfig "PF" acronyms (Randy Dunlap)

 - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas)

 - Add missing include to drivers/pci.h (Alexandru Gagniuc)

 - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it
   instead of xhci (Thinh Nguyen)

 - Clean up P2PDMA documentation (Randy Dunlap)

 - Allow runtime PM even if driver doesn't supply callbacks (Jarkko
   Nikula)

 - Remove status check after submitting Switchtec MRPC Firmware Download
   commands to avoid Completion Timeouts (Kelvin Cao)

 - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher)

 - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue
   (Joey Zhang)

 - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao)

 - Add Switchtec MRPC DMA mode support (Wesley Sheng)

 - Skip VF scanning on powerpc, which does this in firmware (Sebastian
   Ott)

 - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang)

 - Constify histb dw_pcie_host_ops structure (Julia Lawall)

 - Support multiple power domains for imx6 (Leonard Crestez)

 - Constify layerscape driver data (Stefan Agner)

 - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho)

 - Support armada8k GPIO reset (Baruch Siach)

 - Support suspend/resume support on imx6 (Leonard Crestez)

 - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren)

 - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov)

 - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi)

 - Mask DesignWare interrupts instead of disabling them to avoid lost
   interrupts (Marc Zyngier)

 - Add locking when acking DesignWare interrupts (Marc Zyngier)

 - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier)

 - Use devm resource parser in mediatek (Honghui Zhang)

 - Remove unused mediatek "num-lanes" DT property (Honghui Zhang)

 - Add UniPhier PCIe controller driver and DT bindings (Kunihiko
   Hayashi)

 - Enable MSI for imx6 downstream components (Richard Zhu)

* tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits)
  PCI: imx: Enable MSI from downstream components
  s390/pci: skip VF scanning
  PCI/IOV: Add flag so platforms can skip VF scanning
  PCI/IOV: Factor out sriov_add_vfs()
  PCI: uniphier: Add UniPhier PCIe host controller support
  dt-bindings: PCI: Add UniPhier PCIe host controller description
  PCI: amlogic: Add the Amlogic Meson PCIe controller driver
  dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller
  arm64: dts: mt7622: Remove un-used property for PCIe
  arm: dts: mt7623: Remove un-used property for PCIe
  dt-bindings: PCI: MediaTek: Remove un-used property
  PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
  MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
  PCI: dwc: Don't hard-code DBI/ATU offset
  PCI: imx: Add imx6sx suspend/resume support
  PCI: armada8k: Add support for gpio controlled reset signal
  PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
  PCI: dwc: layerscape: Constify driver data
  PCI: imx: Add multi-pd support
  PCI: Override Synopsys USB 3.x HAPS device class
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next</title>
<updated>2018-12-27T21:04:52+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2018-12-27T21:04:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e0c38a4d1f196a4b17d2eba36afff8f656a4f1de'/>
<id>e0c38a4d1f196a4b17d2eba36afff8f656a4f1de</id>
<content type='text'>
Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for -&gt;xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull networking updates from David Miller:

 1) New ipset extensions for matching on destination MAC addresses, from
    Stefano Brivio.

 2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
    nfp driver. From Stefano Brivio.

 3) Implement GRO for plain UDP sockets, from Paolo Abeni.

 4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
    bit so that we could support the entire vlan_tci value.

 5) Rework the IPSEC policy lookups to better optimize more usecases,
    from Florian Westphal.

 6) Infrastructure changes eliminating direct manipulation of SKB lists
    wherever possible, and to always use the appropriate SKB list
    helpers. This work is still ongoing...

 7) Lots of PHY driver and state machine improvements and
    simplifications, from Heiner Kallweit.

 8) Various TSO deferral refinements, from Eric Dumazet.

 9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
    Kallweit, including support for -&gt;xmit_more. This driver has been
    getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
    the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
    completely from the tree as it no longer has any users. From Oz
    Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
    therefore abort the operation before the commit phase (which is the
    NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
    in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
    the auxiliary SKB data used by IPSEC and bridge netfilter, and is
    designed to support the needs to MPTCP which could be integrated in
    the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
  net: dccp: fix kernel crash on module load
  drivers/net: appletalk/cops: remove redundant if statement and mask
  bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
  net/net_namespace: Check the return value of register_pernet_subsys()
  net/netlink_compat: Fix a missing check of nla_parse_nested
  ieee802154: lowpan_header_create check must check daddr
  net/mlx4_core: drop useless LIST_HEAD
  mlxsw: spectrum: drop useless LIST_HEAD
  net/mlx5e: drop useless LIST_HEAD
  iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
  net/mlx5e: fix semicolon.cocci warnings
  staging: octeon: fix build failure with XFRM enabled
  net: Revert recent Spectre-v1 patches.
  can: af_can: Fix Spectre v1 vulnerability
  packet: validate address length if non-zero
  nfc: af_nfc: Fix Spectre v1 vulnerability
  phonet: af_phonet: Fix Spectre v1 vulnerability
  net: core: Fix Spectre v1 vulnerability
  net: minor cleanup in skb_ext_add()
  net: drop the unused helper skb_ext_get()
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>PCI: Move Synopsys HAPS platform device IDs</title>
<updated>2018-12-17T22:24:39+00:00</updated>
<author>
<name>Thinh Nguyen</name>
<email>thinh.nguyen@synopsys.com</email>
</author>
<published>2018-12-10T22:07:54+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b6061b1e566d70c7686d194a6c47dc6ffa665c77'/>
<id>b6061b1e566d70c7686d194a6c47dc6ffa665c77</id>
<content type='text'>
Move Synopsys HAPS platform device IDs to pci_ids.h so that both
drivers/pci/quirks.c and dwc3-haps driver can reference these IDs.

Signed-off-by: Thinh Nguyen &lt;thinhn@synopsys.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Felipe Balbi &lt;felipe.balbi@linux.intel.com&gt;</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Move Synopsys HAPS platform device IDs to pci_ids.h so that both
drivers/pci/quirks.c and dwc3-haps driver can reference these IDs.

Signed-off-by: Thinh Nguyen &lt;thinhn@synopsys.com&gt;
Signed-off-by: Bjorn Helgaas &lt;bhelgaas@google.com&gt;
Acked-by: Felipe Balbi &lt;felipe.balbi@linux.intel.com&gt;</pre>
</div>
</content>
</entry>
</feed>
