This card identifies itself as:
  Ethernet controller [0200]: NCube Device [10ff:8168] (rev 06)
  Subsystem: TP-LINK Technologies Co., Ltd. Device [7470:3468]

Adding a new entry to rtl8169_pci_tbl makes the card work.

Link: http://launchpad.net/bugs/1788730
Signed-off-by: Anthony Wong <anthony.wong@ubuntu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

  - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer)

  - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe)

* pci/switchtec:
  PCI: Expand documentation for pci_add_dma_alias()
  PCI: Add DMA alias quirk for Microsemi Switchtec NTB
  switchtec: Use generic PCI Vendor ID and Class Code

# Conflicts:
#	drivers/pci/quirks.c

Like the NFP4000 and NFP6000, the NFP5000 as an erratum where reading/
writing to PCI config space addresses above 0x600 can cause the NFP to
generate PCIe completion timeouts.

Limit the NFP5000's PF's config space size to 0x600 bytes as is already
done for the NFP4000 and NFP6000.

The NFP5000's VF is 0x6003 (PCI_DEVICE_ID_NETRONOME_NFP6000_VF), the same
device ID as the NFP6000's VF.  Thus, its config space is already limited
by the existing use of quirk_nfp6000().

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tony Egan <tony.egan@netronome.com>

Move the Microsemi Switchtec PCI Vendor ID (same as
PCI_VENDOR_ID_PMC_Sierra) to pci_ids.h.   Also, replace Microsemi class
constants with the standard PCI definitions.

Signed-off-by: Doug Meyer <dmeyer@gigaio.com>
[bhelgaas: restore SPDX (I assume it was removed by mistake), remove
device ID definitions]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>

  - support VMD "membar shadow" feature (Jon Derrick)

  - support VMD bus number offsets (Jon Derrick)

  - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick)

* lorenzo/pci/vmd:
  PCI: vmd: Add an additional VMD device id to driver device id table
  x86/PCI: Add additional VMD device root ports to VMD AER quirk
  PCI: vmd: Add offset to bus numbers if necessary
  PCI: vmd: Assign membar addresses from shadow registers
  PCI: Add Intel VMD devices to pci ids

  - implement Mediatek chained IRQ handling (Honghui Zhang)

  - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang)

* lorenzo/pci/mediatek:
  PCI: mediatek: Implement chained IRQ handling setup
  PCI: mediatek: Set up vendor ID and class type for MT7622

# Conflicts:
#	drivers/pci/host/Kconfig

  - add generic enable function for simple SR-IOV hardware (Alexander
    Duyck)

  - use generic SR-IOV enable for ena, nvme (Alexander Duyck)

  - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson)

  - add ACS quirk for Intel 300 series (Mika Westerberg)

* pci/virtualization:
  PCI/IOV: Allow PF drivers to limit total_VFs to 0
  PCI: Add "pci=noats" boot parameter
  PCI: Add ACS quirk for Intel 300 series
  PCI: Add ACS quirk for Intel 7th & 8th Gen mobile
  nvme-pci: Use pci_sriov_configure_simple() to enable VFs
  net: ena: Use pci_sriov_configure_simple() to enable VFs
  PCI/IOV: Add pci-pf-stub driver for PFs that only enable VFs
  PCI/IOV: Add pci_sriov_configure_simple()

In the same way we do for pciehp, add shpchp_is_native(), which returns
true if the bridge should be handled by the native SHPC driver.  Then
convert the driver to use this function.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add the Intel VMD device ids to the pci id database and update the VMD
driver.

Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Add the Qualcomm vendor ID to pci_ids.h and use it in quirks.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>