linux-stable.git/include/linux/pagemap.h, branch v3.14.78

mm: get rid of radix tree gfp mask for pagecache_get_page

2015-01-30T01:40:53+00:00

commit 45f87de57f8fad59302fd263dd81ffa4843b5b24 upstream.

Commit 2457aec63745 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.

Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks.  This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.

Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree.  Just make
sure that the radix tree gets only the sane subset of the mask (e.g.  do
not pass __GFP_WRITE).

Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.

Reported-by: Dave Chinner 
Signed-off-by: Michal Hocko 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

mm: non-atomically mark page accessed during page cache allocation where possible

2015-01-30T01:40:52+00:00

commit 2457aec63745e235bcafb7ef312b182d8682f0fc upstream.

aops->write_begin may allocate a new page and make it visible only to have
mark_page_accessed called almost immediately after.  Once the page is
visible the atomic operations are necessary which is noticable overhead
when writing to an in-memory filesystem like tmpfs but should also be
noticable with fast storage.  The objective of the patch is to initialse
the accessed information with non-atomic operations before the page is
visible.

The bulk of filesystems directly or indirectly use
grab_cache_page_write_begin or find_or_create_page for the initial
allocation of a page cache page.  This patch adds an init_page_accessed()
helper which behaves like the first call to mark_page_accessed() but may
called before the page is visible and can be done non-atomically.

The primary APIs of concern in this care are the following and are used
by most filesystems.

	find_get_page
	find_lock_page
	find_or_create_page
	grab_cache_page_nowait
	grab_cache_page_write_begin

All of them are very similar in detail to the patch creates a core helper
pagecache_get_page() which takes a flags parameter that affects its
behavior such as whether the page should be marked accessed or not.  Then
old API is preserved but is basically a thin wrapper around this core
function.

Each of the filesystems are then updated to avoid calling
mark_page_accessed when it is known that the VM interfaces have already
done the job.  There is a slight snag in that the timing of the
mark_page_accessed() has now changed so in rare cases it's possible a page
gets to the end of the LRU as PageReferenced where as previously it might
have been repromoted.  This is expected to be rare but it's worth the
filesystem people thinking about it in case they see a problem with the
timing change.  It is also the case that some filesystems may be marking
pages accessed that previously did not but it makes sense that filesystems
have consistent behaviour in this regard.

The test case used to evaulate this is a simple dd of a large file done
multiple times with the file deleted on each iterations.  The size of the
file is 1/10th physical memory to avoid dirty page balancing.  In the
async case it will be possible that the workload completes without even
hitting the disk and will have variable results but highlight the impact
of mark_page_accessed for async IO.  The sync results are expected to be
more stable.  The exception is tmpfs where the normal case is for the "IO"
to not hit the disk.

The test machine was single socket and UMA to avoid any scheduling or NUMA
artifacts.  Throughput and wall times are presented for sync IO, only wall
times are shown for async as the granularity reported by dd and the
variability is unsuitable for comparison.  As async results were variable
do to writback timings, I'm only reporting the maximum figures.  The sync
results were stable enough to make the mean and stddev uninteresting.

The performance results are reported based on a run with no profiling.
Profile data is based on a separate run with oprofile running.

async dd
                                    3.15.0-rc3            3.15.0-rc3
                                       vanilla           accessed-v2
ext3    Max      elapsed     13.9900 (  0.00%)     11.5900 ( 17.16%)
tmpfs	Max      elapsed      0.5100 (  0.00%)      0.4900 (  3.92%)
btrfs   Max      elapsed     12.8100 (  0.00%)     12.7800 (  0.23%)
ext4	Max      elapsed     18.6000 (  0.00%)     13.3400 ( 28.28%)
xfs	Max      elapsed     12.5600 (  0.00%)      2.0900 ( 83.36%)

The XFS figure is a bit strange as it managed to avoid a worst case by
sheer luck but the average figures looked reasonable.

        samples percentage
ext3       86107    0.9783  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext3       23833    0.2710  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext3        5036    0.0573  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
ext4       64566    0.8961  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
ext4        5322    0.0713  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
ext4        2869    0.0384  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs        62126    1.7675  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
xfs         1904    0.0554  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
xfs          103    0.0030  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
btrfs      10655    0.1338  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
btrfs       2020    0.0273  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
btrfs        587    0.0079  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed
tmpfs      59562    3.2628  vmlinux-3.15.0-rc4-vanilla        mark_page_accessed
tmpfs       1210    0.0696  vmlinux-3.15.0-rc4-accessed-v3r25 init_page_accessed
tmpfs         94    0.0054  vmlinux-3.15.0-rc4-accessed-v3r25 mark_page_accessed

[akpm@linux-foundation.org: don't run init_page_accessed() against an uninitialised pointer]
Signed-off-by: Mel Gorman 
Cc: Johannes Weiner 
Cc: Vlastimil Babka 
Cc: Jan Kara 
Cc: Michal Hocko 
Cc: Hugh Dickins 
Cc: Dave Hansen 
Cc: Theodore Ts'o 
Cc: "Paul E. McKenney" 
Cc: Oleg Nesterov 
Cc: Rik van Riel 
Cc: Peter Zijlstra 
Tested-by: Prabhakar Lad 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
Signed-off-by: Greg Kroah-Hartman

mm: page_alloc: convert hot/cold parameter and immediate callers to bool

2015-01-30T01:40:51+00:00

commit b745bc85f21ea707e4ea1a91948055fa3e72c77b upstream.

cold is a bool, make it one.  Make the likely case the "if" part of the
block instead of the else as according to the optimisation manual this is
preferred.

Signed-off-by: Mel Gorman 
Acked-by: Rik van Riel 
Cc: Johannes Weiner 
Cc: Vlastimil Babka 
Cc: Jan Kara 
Cc: Michal Hocko 
Cc: Hugh Dickins 
Cc: Dave Hansen 
Cc: Theodore Ts'o 
Cc: "Paul E. McKenney" 
Cc: Oleg Nesterov 
Cc: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
Signed-off-by: Greg Kroah-Hartman

mm: remove read_cache_page_async()

2014-11-21T17:23:06+00:00

commit 67f9fd91f93c582b7de2ab9325b6e179db77e4d5 upstream.

This patch removes read_cache_page_async() which wasn't really needed
anywhere and simplifies the code around it a bit.

read_cache_page_async() is useful when we want to read a page into the
cache without waiting for it to complete.  This happens when the
appropriate callback 'filler' doesn't complete its read operation and
releases the page lock immediately, and instead queues a different
completion routine to do that.  This never actually happened anywhere in
the code.

read_cache_page_async() had 3 different callers:

- read_cache_page() which is the sync version, it would just wait for
  the requested read to complete using wait_on_page_read().

- JFFS2 would call it from jffs2_gc_fetch_page(), but the filler
  function it supplied doesn't do any async reads, and would complete
  before the filler function returns - making it actually a sync read.

- CRAMFS would call it using the read_mapping_page_async() wrapper, with
  a similar story to JFFS2 - the filler function doesn't do anything that
  reminds async reads and would always complete before the filler function
  returns.

To sum it up, the code in mm/filemap.c never took advantage of having
read_cache_page_async().  While there are filler callbacks that do async
reads (such as the block one), we always called it with the
read_cache_page().

This patch adds a mandatory wait for read to complete when adding a new
page to the cache, and removes read_cache_page_async() and its wrappers.

Signed-off-by: Sasha Levin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
Signed-off-by: Greg Kroah-Hartman

mm + fs: prepare for non-page entries in page cache radix trees

2014-11-21T17:23:06+00:00

commit 0cd6144aadd2afd19d1aca880153530c52957604 upstream.

shmem mappings already contain exceptional entries where swap slot
information is remembered.

To be able to store eviction information for regular page cache, prepare
every site dealing with the radix trees directly to handle entries other
than pages.

The common lookup functions will filter out non-page entries and return
NULL for page cache holes, just as before.  But provide a raw version of
the API which returns non-page entries as well, and switch shmem over to
use it.

Signed-off-by: Johannes Weiner 
Reviewed-by: Rik van Riel 
Reviewed-by: Minchan Kim 
Cc: Andrea Arcangeli 
Cc: Bob Liu 
Cc: Christoph Hellwig 
Cc: Dave Chinner 
Cc: Greg Thelen 
Cc: Hugh Dickins 
Cc: Jan Kara 
Cc: KOSAKI Motohiro 
Cc: Luigi Semenzato 
Cc: Mel Gorman 
Cc: Metin Doslu 
Cc: Michel Lespinasse 
Cc: Ozgun Erdogan 
Cc: Peter Zijlstra 
Cc: Roman Gushchin 
Cc: Ryan Mallon 
Cc: Tejun Heo 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
Signed-off-by: Greg Kroah-Hartman

mm: filemap: move radix tree hole searching here

2014-11-21T17:23:06+00:00

commit e7b563bb2a6f4d974208da46200784b9c5b5a47e upstream.

The radix tree hole searching code is only used for page cache, for
example the readahead code trying to get a a picture of the area
surrounding a fault.

It sufficed to rely on the radix tree definition of holes, which is
"empty tree slot".  But this is about to change, though, as shadow page
descriptors will be stored in the page cache after the actual pages get
evicted from memory.

Move the functions over to mm/filemap.c and make them native page cache
operations, where they can later be adapted to handle the new definition
of "page cache hole".

Signed-off-by: Johannes Weiner 
Reviewed-by: Rik van Riel 
Reviewed-by: Minchan Kim 
Acked-by: Mel Gorman 
Cc: Andrea Arcangeli 
Cc: Bob Liu 
Cc: Christoph Hellwig 
Cc: Dave Chinner 
Cc: Greg Thelen 
Cc: Hugh Dickins 
Cc: Jan Kara 
Cc: KOSAKI Motohiro 
Cc: Luigi Semenzato 
Cc: Metin Doslu 
Cc: Michel Lespinasse 
Cc: Ozgun Erdogan 
Cc: Peter Zijlstra 
Cc: Roman Gushchin 
Cc: Ryan Mallon 
Cc: Tejun Heo 
Cc: Vlastimil Babka 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Mel Gorman 
Signed-off-by: Greg Kroah-Hartman

mm: dump page when hitting a VM_BUG_ON using VM_BUG_ON_PAGE

2014-01-24T00:36:50+00:00

Most of the VM_BUG_ON assertions are performed on a page.  Usually, when
one of these assertions fails we'll get a BUG_ON with a call stack and
the registers.

I've recently noticed based on the requests to add a small piece of code
that dumps the page to various VM_BUG_ON sites that the page dump is
quite useful to people debugging issues in mm.

This patch adds a VM_BUG_ON_PAGE(cond, page) which beyond doing what
VM_BUG_ON() does, also dumps the page before executing the actual
BUG_ON.

[akpm@linux-foundation.org: fix up includes]
Signed-off-by: Sasha Levin 
Cc: "Kirill A. Shutemov" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

vm: adjust ifdef for TINY_RCU

2013-04-29T22:54:28+00:00

There is an ifdef in page_cache_get_speculative() that checks for !SMP
and TREE_RCU, which has been an impossible combination since the advent
of TINY_RCU.  The ifdef enables a fastpath that is valid when preemption
is disabled by rcu_read_lock() in UP systems, which is the case when
TINY_RCU is enabled.  This commit therefore adjusts the ifdef to
generate the fastpath when TINY_RCU is enabled.

Signed-off-by: Paul E. McKenney 
Reported-by: Andi Kleen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: only enforce stable page writes if the backing device requires it

2013-02-22T01:22:19+00:00

Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait.  Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function.  This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.

Before this patchset, all filesystems would block, regardless of whether
or not it was necessary.  ext3 would wait, but still generate occasional
checksum errors.  The network filesystems were left to do their own
thing, so they'd wait too.

After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it.  ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait.  Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.

Here's the result of using dbench to test latency on ext2:

3.8.0-rc3:
 Operation      Count    AvgLat    MaxLat
 ----------------------------------------
 WriteX        109347     0.028    59.817
 ReadX         347180     0.004     3.391
 Flush          15514    29.828   287.283

Throughput 57.429 MB/sec  4 clients  4 procs  max_latency=287.290 ms

3.8.0-rc3 + patches:
 WriteX        105556     0.029     4.273
 ReadX         335004     0.005     4.112
 Flush          14982    30.540   298.634

Throughput 55.4496 MB/sec  4 clients  4 procs  max_latency=298.650 ms

As you can see, the maximum write latency drops considerably with this
patch enabled.  The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.

Signed-off-by: Darrick J. Wong 
Acked-by: Steven Whitehouse 
Reviewed-by: Jan Kara 
Cc: Adrian Hunter 
Cc: Andy Lutomirski 
Cc: Artem Bityutskiy 
Cc: Joel Becker 
Cc: Mark Fasheh 
Cc: Jens Axboe 
Cc: Eric Van Hensbergen 
Cc: Ron Minnich 
Cc: Latchesar Ionkov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: introduce a common interface for balloon pages mobility

2012-12-12T01:22:26+00:00

Memory fragmentation introduced by ballooning might reduce significantly
the number of 2MB contiguous memory blocks that can be used within a guest,
thus imposing performance penalties associated with the reduced number of
transparent huge pages that could be used by the guest workload.

This patch introduces a common interface to help a balloon driver on
making its page set movable to compaction, and thus allowing the system
to better leverage the compation efforts on memory defragmentation.

[akpm@linux-foundation.org: use PAGE_FLAGS_CHECK_AT_PREP, s/__balloon_page_flags/page_flags_cleared/, small cleanups]
[rientjes@google.com: allow balloon compaction for any system with memory compaction enabled, which is the defconfig]
Signed-off-by: Rafael Aquini 
Acked-by: Mel Gorman 
Cc: Rusty Russell 
Cc: "Michael S. Tsirkin" 
Cc: Rik van Riel 
Cc: Andi Kleen 
Cc: Konrad Rzeszutek Wilk 
Cc: Minchan Kim 
Signed-off-by: David Rientjes 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds