linux-stable.git/include/linux/netdevice.h, branch v4.5.3

net: validate variable length ll headers

2016-04-20T06:45:10+00:00

[ Upstream commit 2793a23aacbd754dbbb5cb75093deb7e4103bace ]

Netdevice parameter hard_header_len is variously interpreted both as
an upper and lower bound on link layer header length. The field is
used as upper bound when reserving room at allocation, as lower bound
when validating user input in PF_PACKET.

Clarify the definition to be maximum header length. For validation
of untrusted headers, add an optional validate member to header_ops.

Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance
for deliberate testing of corrupt input. In this case, pad trailing
bytes, as some device drivers expect completely initialized headers.

See also http://comments.gmane.org/gmane.linux.network/401064

Signed-off-by: Willem de Bruijn 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: make netdev_for_each_lower_dev safe for device removal

2016-02-19T20:29:26+00:00

When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf:
remove slave queue and private slave struct") I thought that it acts
like netdev_for_each_lower_private and can be used to remove the current
device from the list while walking, but unfortunately it acts more like
netdev_for_each_lower_private_rcu and doesn't allow it. The difference
is where the "iter" points to, right now it points to the current element
and that makes it impossible to remove it. Change the logic to be
similar to netdev_for_each_lower_private and make it point to the "next"
element so we can safely delete the current one. VRF is the only such
user right now, there's no change for the read-only users.

Here's what can happen now:
[98423.249858] general protection fault: 0000 [#1] SMP
[98423.250175] Modules linked in: vrf bridge(O) stp llc nfsd auth_rpcgss
oid_registry nfs_acl nfs lockd grace sunrpc crct10dif_pclmul
crc32_pclmul crc32c_intel ghash_clmulni_intel jitterentropy_rng
sha256_generic hmac drbg ppdev aesni_intel aes_x86_64 glue_helper lrw
gf128mul ablk_helper cryptd evdev serio_raw pcspkr virtio_balloon
parport_pc parport i2c_piix4 i2c_core virtio_console acpi_cpufreq button
9pnet_virtio 9p 9pnet fscache ipv6 autofs4 ext4 crc16 mbcache jbd2 sg
virtio_blk virtio_net sr_mod cdrom e1000 ata_generic ehci_pci uhci_hcd
ehci_hcd usbcore usb_common virtio_pci ata_piix libata floppy
virtio_ring virtio scsi_mod [last unloaded: bridge]
[98423.255040] CPU: 1 PID: 14173 Comm: ip Tainted: G           O
4.5.0-rc2+ #81
[98423.255386] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.8.1-20150318_183358- 04/01/2014
[98423.255777] task: ffff8800547f5540 ti: ffff88003428c000 task.ti:
ffff88003428c000
[98423.256123] RIP: 0010:[]  []
netdev_lower_get_next+0x1e/0x30
[98423.256534] RSP: 0018:ffff88003428f940  EFLAGS: 00010207
[98423.256766] RAX: 0002000100000004 RBX: ffff880054ff9000 RCX:
0000000000000000
[98423.257039] RDX: ffff88003428f8b8 RSI: ffff88003428f950 RDI:
ffff880054ff90c0
[98423.257287] RBP: ffff88003428f940 R08: 0000000000000000 R09:
0000000000000000
[98423.257537] R10: 0000000000000001 R11: 0000000000000000 R12:
ffff88003428f9e0
[98423.257802] R13: ffff880054a5fd00 R14: ffff88003428f970 R15:
0000000000000001
[98423.258055] FS:  00007f3d76881700(0000) GS:ffff88005d000000(0000)
knlGS:0000000000000000
[98423.258418] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[98423.258650] CR2: 00007ffe5951ffa8 CR3: 0000000052077000 CR4:
00000000000406e0
[98423.258902] Stack:
[98423.259075]  ffff88003428f960 ffffffffa0442636 0002000100000004
ffff880054ff9000
[98423.259647]  ffff88003428f9b0 ffffffff81518205 ffff880054ff9000
ffff88003428f978
[98423.260208]  ffff88003428f978 ffff88003428f9e0 ffff88003428f9e0
ffff880035b35f00
[98423.260739] Call Trace:
[98423.260920]  [] vrf_dev_uninit+0x76/0xa0 [vrf]
[98423.261156]  []
rollback_registered_many+0x205/0x390
[98423.261401]  [] unregister_netdevice_many+0x1c/0x70
[98423.261641]  [] rtnl_delete_link+0x3c/0x50
[98423.271557]  [] rtnl_dellink+0xcb/0x1d0
[98423.271800]  [] ? __inc_zone_state+0x4a/0x90
[98423.272049]  [] rtnetlink_rcv_msg+0x84/0x200
[98423.272279]  [] ? trace_hardirqs_on+0xd/0x10
[98423.272513]  [] ? rtnetlink_rcv+0x1b/0x40
[98423.272755]  [] ? rtnetlink_rcv+0x40/0x40
[98423.272983]  [] netlink_rcv_skb+0x97/0xb0
[98423.273209]  [] rtnetlink_rcv+0x2a/0x40
[98423.273476]  [] netlink_unicast+0x11b/0x1a0
[98423.273710]  [] netlink_sendmsg+0x3e1/0x610
[98423.273947]  [] sock_sendmsg+0x38/0x70
[98423.274175]  [] ___sys_sendmsg+0x2e3/0x2f0
[98423.274416]  [] ? do_raw_spin_unlock+0xbe/0x140
[98423.274658]  [] ? handle_mm_fault+0x26c/0x2210
[98423.274894]  [] ? handle_mm_fault+0x4d/0x2210
[98423.275130]  [] ? __fget_light+0x91/0xb0
[98423.275365]  [] __sys_sendmsg+0x42/0x80
[98423.275595]  [] SyS_sendmsg+0x12/0x20
[98423.275827]  [] entry_SYSCALL_64_fastpath+0x16/0x7a
[98423.276073] Code: c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66 66
90 48 8b 06 55 48 81 c7 c0 00 00 00 48 89 e5 48 8b 00 48 39 f8 74 09 48
89 06 <48> 8b 40 e8 5d c3 31 c0 5d c3 0f 1f 84 00 00 00 00 00 66 66 66
[98423.279639] RIP  [] netdev_lower_get_next+0x1e/0x30
[98423.279920]  RSP 

CC: David Ahern 
CC: David S. Miller 
CC: Roopa Prabhu 
CC: Vlad Yasevich 
Fixes: bad531623253 ("vrf: remove slave queue and private slave struct")
Signed-off-by: Nikolay Aleksandrov 
Reviewed-by: David Ahern 
Tested-by: David Ahern 
Signed-off-by: David S. Miller

net: simplify napi_synchronize() to avoid warnings

2016-01-25T06:19:55+00:00

The napi_synchronize() function is defined twice: The definition
for SMP builds waits for other CPUs to be done, while the uniprocessor
variant just contains a barrier and ignores its argument.

In the mvneta driver, this leads to a warning about an unused variable
when we lookup the NAPI struct of another CPU and then don't use it:

ethernet/marvell/mvneta.c: In function 'mvneta_percpu_notifier':
ethernet/marvell/mvneta.c:2910:30: error: unused variable 'other_port' [-Werror=unused-variable]

There are no other CPUs on a UP build, so that code never runs, but
gcc does not know this.

The nicest solution seems to be to turn the napi_synchronize() helper
into an inline function for the UP case as well, as that leads gcc to
not complain about the argument being unused. Once we do that, we can
also combine the two cases into a single function definition and use
if(IS_ENABLED()) rather than #ifdef to make it look a bit nicer.

The warning first came up in linux-4.4, but I failed to catch it
earlier.

Signed-off-by: Arnd Bergmann 
Fixes: f86428854480 ("net: mvneta: Statically assign queues to CPUs")
Signed-off-by: David S. Miller

net: Fix typo in netdev_intersect_features

2016-01-12T04:28:44+00:00

Obviously need to 'or in NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM.

Fixes: c8cd0989bd151f ("net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUM")
Reported-by: Jack Morgenstein 
Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net, sched: add clsact qdisc

2016-01-11T03:13:15+00:00

This work adds a generalization of the ingress qdisc as a qdisc holding
only classifiers. The clsact qdisc works on ingress, but also on egress.
In both cases, it's execution happens without taking the qdisc lock, and
the main difference for the egress part compared to prior version of [1]
is that this can be applied with _any_ underlying real egress qdisc (also
classless ones).

Besides solving the use-case of [1], that is, allowing for more programmability
on assigning skb->priority for the mqprio case that is supported by most
popular 10G+ NICs, it also opens up a lot more flexibility for other tc
applications. The main work on classification can already be done at clsact
egress time if the use-case allows and state stored for later retrieval
f.e. again in skb->priority with major/minors (which is checked by most
classful qdiscs before consulting tc_classify()) and/or in other skb fields
like skb->tc_index for some light-weight post-processing to get to the
eventual classid in case of a classful qdisc. Another use case is that
the clsact egress part allows to have a central egress counterpart to
the ingress classifiers, so that classifiers can easily share state (e.g.
in cls_bpf via eBPF maps) for ingress and egress.

Currently, default setups like mq + pfifo_fast would require for this to
use, for example, prio qdisc instead (to get a tc_classify() run) and to
duplicate the egress classifier for each queue. With clsact, it allows
for leaving the setup as is, it can additionally assign skb->priority to
put the skb in one of pfifo_fast's bands and it can share state with maps.
Moreover, we can access the skb's dst entry (f.e. to retrieve tclassid)
w/o the need to perform a skb_dst_force() to hold on to it any longer. In
lwt case, we can also use this facility to setup dst metadata via cls_bpf
(bpf_skb_set_tunnel_key()) without needing a real egress qdisc just for
that (case of IFF_NO_QUEUE devices, for example).

The realization can be done without any changes to the scheduler core
framework. All it takes is that we have two a-priori defined minors/child
classes, where we can mux between ingress and egress classifier list
(dev->ingress_cl_list and dev->egress_cl_list, latter stored close to
dev->_tx to avoid extra cacheline miss for moderate loads). The egress
part is a bit similar modelled to handle_ing() and patched to a noop in
case the functionality is not used. Both handlers are now called
sch_handle_ingress() and sch_handle_egress(), code sharing among the two
doesn't seem practical as there are various minor differences in both
paths, so that making them conditional in a single handler would rather
slow things down.

Full compatibility to ingress qdisc is provided as well. Since both
piggyback on TC_H_CLSACT, only one of them (ingress/clsact) can exist
per netdevice, and thus ingress qdisc specific behaviour can be retained
for user space. This means, either a user does 'tc qdisc add dev foo ingress'
and configures ingress qdisc as usual, or the 'tc qdisc add dev foo clsact'
alternative, where both, ingress and egress classifier can be configured
as in the below example. ingress qdisc supports attaching classifier to any
minor number whereas clsact has two fixed minors for muxing between the
lists, therefore to not break user space setups, they are better done as
two separate qdiscs.

I decided to extend the sch_ingress module with clsact functionality so
that commonly used code can be reused, the module is being aliased with
sch_clsact so that it can be auto-loaded properly. Alternative would have been
to add a flag when initializing ingress to alter its behaviour plus aliasing
to a different name (as it's more than just ingress). However, the first would
end up, based on the flag, choosing the new/old behaviour by calling different
function implementations to handle each anyway, the latter would require to
register ingress qdisc once again under different alias. So, this really begs
to provide a minimal, cleaner approach to have Qdisc_ops and Qdisc_class_ops
by its own that share callbacks used by both.

Example, adding qdisc:

   # tc qdisc add dev foo clsact
   # tc qdisc show dev foo
   qdisc mq 0: root
   qdisc pfifo_fast 0: parent :1 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
   qdisc pfifo_fast 0: parent :2 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
   qdisc pfifo_fast 0: parent :3 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
   qdisc pfifo_fast 0: parent :4 bands 3 priomap  1 2 2 2 1 2 0 0 1 1 1 1 1 1 1 1
   qdisc clsact ffff: parent ffff:fff1

Adding filters (deleting, etc works analogous by specifying ingress/egress):

   # tc filter add dev foo ingress bpf da obj bar.o sec ingress
   # tc filter add dev foo egress  bpf da obj bar.o sec egress
   # tc filter show dev foo ingress
   filter protocol all pref 49152 bpf
   filter protocol all pref 49152 bpf handle 0x1 bar.o:[ingress] direct-action
   # tc filter show dev foo egress
   filter protocol all pref 49152 bpf
   filter protocol all pref 49152 bpf handle 0x1 bar.o:[egress] direct-action

A 'tc filter show dev foo' or 'tc filter show dev foo parent ffff:' will
show an empty list for clsact. Either using the parent names (ingress/egress)
or specifying the full major/minor will then show the related filter lists.

Prior work on a mqprio prequeue() facility [1] was done mainly by John Fastabend.

  [1] http://patchwork.ozlabs.org/patch/512949/

Signed-off-by: Daniel Borkmann 
Acked-by: John Fastabend 
Signed-off-by: David S. Miller

net: move ndo_features_check() close to ndo_start_xmit()

2016-01-06T21:00:34+00:00

TX fast path uses ndo_start_xmit(), ndo_features_check() and
ndo_select_queue().

Move ndo_features_check() close to ndo_start_xmit() to increase
data locality.

All "struct net_device_ops" should now be using C99 initializers.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-12-18T03:08:28+00:00

Conflicts:
	drivers/net/geneve.c

Here we had an overlapping change, where in 'net' the extraneous stats
bump was being removed whilst in 'net-next' the final argument to
udp_tunnel6_xmit_skb() was being changed.

Signed-off-by: David S. Miller

geneve: Add geneve udp port offload for ethernet devices

2015-12-16T15:58:46+00:00

Add ndo_ops to add/del UDP ports to a device that supports geneve
offload.

v2: Comment fix.

Signed-off-by: Anjali Singhai Jain 
Signed-off-by: Kiran Patil 
Signed-off-by: David S. Miller

net: Add driver helper functions to determine checksum offloadability

2015-12-15T21:50:21+00:00

Add skb_csum_offload_chk driver helper function to determine if a
device with limited checksum offload capabilities is able to offload the
checksum for a given packet.

This patch includes:
  - The skb_csum_offload_chk function. Returns true if checksum is
    offloadable, else false. Optionally, in the case that the checksum
    is not offloable, the function can call skb_checksum_help to resolve
    the checksum. skb_csum_offload_chk also returns whether the checksum
    refers to an encapsulated checksum.
  - Definition of skb_csum_offl_spec structure that caller uses to
    indicate rules about what it can offload (e.g. IPv4/v6, TCP/UDP only,
    whether encapsulated checksums can be offloaded, whether checksum with
    IPv6 extension headers can be offloaded).
  - Ancilary functions called skb_csum_offload_chk_help,
    skb_csum_off_chk_help_cmn, skb_csum_off_chk_help_cmn_v4_only.

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller

net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUM

2015-12-15T21:50:20+00:00

These netif flags are unnecessary convolutions. It is more
straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM,
and NETIF_F_IPV6_CSUM directly.

This patch also:
    - Cleans up can_checksum_protocol
    - Simplifies netdev_intersect_features

Signed-off-by: Tom Herbert 
Signed-off-by: David S. Miller