linux-stable.git/include/linux/mod_devicetable.h, branch v5.15.208 Linux kernel stable tree x86/cpu: Fix x86_match_cpu() to match just X86_VENDOR_INTEL 2024-07-05T07:14:37+00:00 Tony Luck tony.luck@intel.com 2024-05-20T22:45:33+00:00 e492449549e9a8f25ee8c68f4d3612fadbe8f73e [ Upstream commit 93022482b2948a9a7e9b5a2bb685f2e1cb4c3348 ] Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit 4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from: static const struct x86_cpu_id intel_cod_cpu[] = { X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0), /* COD */ X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0), /* COD */ X86_MATCH_INTEL_FAM6_MODEL(ANY, 1), /* SNC */ <--- 443 {} }; static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) { const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu); to: static const struct x86_cpu_id intel_cod_cpu[] = { X86_MATCH_VFM(INTEL_HASWELL_X, 0), /* COD */ X86_MATCH_VFM(INTEL_BROADWELL_X, 0), /* COD */ X86_MATCH_VFM(INTEL_ANY, 1), /* SNC */ {} }; static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) { const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu); On an Intel CPU with SNC enabled this code previously matched the rule on line 443 to avoid printing messages about insane cache configuration. The new code did not match any rules. Expanding the macros for the intel_cod_cpu[] array shows that the old is equivalent to: static const struct x86_cpu_id intel_cod_cpu[] = { [0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 }, [1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 }, [2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 }, [3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 } } while the new code expands to: static const struct x86_cpu_id intel_cod_cpu[] = { [0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 }, [1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 }, [2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 }, [3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 } } Looking at the code for x86_match_cpu(): const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match) { const struct x86_cpu_id *m; struct cpuinfo_x86 *c = &boot_cpu_data; for (m = match; m->vendor | m->family | m->model | m->steppings | m->feature; m++) { ... } return NULL; it is clear that there was no match because the ANY entry in the table (array index 2) is now the loop termination condition (all of vendor, family, model, steppings, and feature are zero). So this code was working before because the "ANY" check was looking for any Intel CPU in family 6. But fails now because the family is a wild card. So the root cause is that x86_match_cpu() has never been able to match on a rule with just X86_VENDOR_INTEL and all other fields set to wildcards. Add a new flags field to struct x86_cpu_id that has a bit set to indicate that this entry in the array is valid. Update X86_MATCH*() macros to set that bit. Change the end-marker check in x86_match_cpu() to just check the flags field for this bit. Backporter notes: The commit in Fixes is really the one that is broken: you can't have m->vendor as part of the loop termination conditional in x86_match_cpu() because it can happen - as it has happened above - that that whole conditional is 0 albeit vendor == 0 is a valid case - X86_VENDOR_INTEL is 0. However, the only case where the above happens is the SNC check added by 4db64279bc2b1 so you only need this fix if you have backported that other commit 4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable+noautosel@kernel.org> # see above Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 93022482b2948a9a7e9b5a2bb685f2e1cb4c3348 ]

Code in v6.9 arch/x86/kernel/smpboot.c was changed by commit

  4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines") from:

  static const struct x86_cpu_id intel_cod_cpu[] = {
          X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, 0),       /* COD */
          X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, 0),     /* COD */
          X86_MATCH_INTEL_FAM6_MODEL(ANY, 1),             /* SNC */	<--- 443
          {}
  };

  static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
  {
          const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);

to:

  static const struct x86_cpu_id intel_cod_cpu[] = {
           X86_MATCH_VFM(INTEL_HASWELL_X,   0),    /* COD */
           X86_MATCH_VFM(INTEL_BROADWELL_X, 0),    /* COD */
           X86_MATCH_VFM(INTEL_ANY,         1),    /* SNC */
           {}
   };

  static bool match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
  {
          const struct x86_cpu_id *id = x86_match_cpu(intel_cod_cpu);

On an Intel CPU with SNC enabled this code previously matched the rule on line
443 to avoid printing messages about insane cache configuration.  The new code
did not match any rules.

Expanding the macros for the intel_cod_cpu[] array shows that the old is
equivalent to:

  static const struct x86_cpu_id intel_cod_cpu[] = {
  [0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
  [1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
  [2] = { .vendor = 0, .family = 6, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
  [3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
  }

while the new code expands to:

  static const struct x86_cpu_id intel_cod_cpu[] = {
  [0] = { .vendor = 0, .family = 6, .model = 0x3F, .steppings = 0, .feature = 0, .driver_data = 0 },
  [1] = { .vendor = 0, .family = 6, .model = 0x4F, .steppings = 0, .feature = 0, .driver_data = 0 },
  [2] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 1 },
  [3] = { .vendor = 0, .family = 0, .model = 0x00, .steppings = 0, .feature = 0, .driver_data = 0 }
  }

Looking at the code for x86_match_cpu():

  const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
  {
           const struct x86_cpu_id *m;
           struct cpuinfo_x86 *c = &boot_cpu_data;

           for (m = match;
                m->vendor | m->family | m->model | m->steppings | m->feature;
                m++) {
       		...
           }
           return NULL;

it is clear that there was no match because the ANY entry in the table (array
index 2) is now the loop termination condition (all of vendor, family, model,
steppings, and feature are zero).

So this code was working before because the "ANY" check was looking for any
Intel CPU in family 6. But fails now because the family is a wild card. So the
root cause is that x86_match_cpu() has never been able to match on a rule with
just X86_VENDOR_INTEL and all other fields set to wildcards.

Add a new flags field to struct x86_cpu_id that has a bit set to indicate that
this entry in the array is valid. Update X86_MATCH*() macros to set that bit.
Change the end-marker check in x86_match_cpu() to just check the flags field
for this bit.

Backporter notes: The commit in Fixes is really the one that is broken:
you can't have m->vendor as part of the loop termination conditional in
x86_match_cpu() because it can happen - as it has happened above
- that that whole conditional is 0 albeit vendor == 0 is a valid case
- X86_VENDOR_INTEL is 0.

However, the only case where the above happens is the SNC check added by
4db64279bc2b1 so you only need this fix if you have backported that
other commit

  4db64279bc2b ("x86/cpu: Switch to new Intel CPU model defines")

Fixes: 644e9cbbe3fc ("Add driver auto probing for x86 features v4")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable+noautosel@kernel.org> # see above
Link: https://lore.kernel.org/r/20240517144312.GBZkdtAOuJZCvxhFbJ@fat_crate.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system 2021-08-26T16:36:51+00:00 Max Gurtovoy mgurtovoy@nvidia.com 2021-08-26T10:39:09+00:00 cc6711b0bf36de068b10490198d05ac168377989 Expose an 'override_only' helper macro (i.e. PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the required code to prefix its matching entries with "vfio_" in modules.alias file. It allows VFIO device drivers to include match entries in the modules.alias file produced by kbuild that are not used for normal driver autoprobing and module autoloading. Drivers using these match entries can be connected to the PCI device manually, by userspace, using the existing driver_override sysfs. For example the resulting modules.alias may have: alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci In this example mlx5_core and mlx5_vfio_pci match to the same PCI device. The kernel will autoload and autobind to mlx5_core but the kernel and udev mechanisms will ignore mlx5_vfio_pci. When userspace wants to change a device to the VFIO subsystem it can implement a generic algorithm: 1) Identify the sysfs path to the device: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 2) Get the modalias string from the kernel: $ cat /sys/bus/pci/devices/0000:01:00.0/modalias pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 3) Prefix it with vfio_: vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00 4) Search modules.alias for the above string and select the entry that has the fewest *'s: alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci 5) modprobe the matched module name: $ modprobe mlx5_vfio_pci 6) cat the matched module name to driver_override: echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override 7) unbind device from original module echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind 8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci) echo 0000:01:00.0 > /sys/bus/pci/drivers_probe The algorithm is independent of bus type. In future the other buses with VFIO device drivers, like platform and ACPI, can use this algorithm as well. This patch is the infrastructure to provide the information in the modules.alias to userspace. Convert the only VFIO pci_driver which results in one new line in the modules.alias: alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci Later series introduce additional HW specific VFIO PCI drivers, such as mlx5_vfio_pci. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for pci.h Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> 
Expose an 'override_only' helper macro (i.e.
PCI_DRIVER_OVERRIDE_DEVICE_VFIO) for VFIO PCI sub system and add the
required code to prefix its matching entries with "vfio_" in
modules.alias file.

It allows VFIO device drivers to include match entries in the
modules.alias file produced by kbuild that are not used for normal
driver autoprobing and module autoloading. Drivers using these match
entries can be connected to the PCI device manually, by userspace, using
the existing driver_override sysfs.

For example the resulting modules.alias may have:

  alias pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_core
  alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci
  alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci

In this example mlx5_core and mlx5_vfio_pci match to the same PCI
device. The kernel will autoload and autobind to mlx5_core but the
kernel and udev mechanisms will ignore mlx5_vfio_pci.

When userspace wants to change a device to the VFIO subsystem it can
implement a generic algorithm:

   1) Identify the sysfs path to the device:
    /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0

   2) Get the modalias string from the kernel:
    $ cat /sys/bus/pci/devices/0000:01:00.0/modalias
    pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00

   3) Prefix it with vfio_:
    vfio_pci:v000015B3d00001021sv000015B3sd00000001bc02sc00i00

   4) Search modules.alias for the above string and select the entry that
      has the fewest *'s:
    alias vfio_pci:v000015B3d00001021sv*sd*bc*sc*i* mlx5_vfio_pci

   5) modprobe the matched module name:
    $ modprobe mlx5_vfio_pci

   6) cat the matched module name to driver_override:
    echo mlx5_vfio_pci > /sys/bus/pci/devices/0000:01:00.0/driver_override

   7) unbind device from original module
     echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind

   8) probe PCI drivers (or explicitly bind to mlx5_vfio_pci)
    echo 0000:01:00.0 > /sys/bus/pci/drivers_probe

The algorithm is independent of bus type. In future the other buses with
VFIO device drivers, like platform and ACPI, can use this algorithm as
well.

This patch is the infrastructure to provide the information in the
modules.alias to userspace. Convert the only VFIO pci_driver which results
in one new line in the modules.alias:

  alias vfio_pci:v*d*sv*sd*bc*sc*i* vfio_pci

Later series introduce additional HW specific VFIO PCI drivers, such as
mlx5_vfio_pci.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>  # for pci.h
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-11-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
PCI: Add 'override_only' field to struct pci_device_id 2021-08-26T16:36:51+00:00 Max Gurtovoy mgurtovoy@nvidia.com 2021-08-26T10:39:08+00:00 343b7258687ecfbb363bfda8833a7cf641aac524 Add 'override_only' field to struct pci_device_id to be used as part of pci_match_device(). When set, a driver only matches the entry when dev->driver_override is set to that driver. In addition, add a helper macro named 'PCI_DEVICE_DRIVER_OVERRIDE' to enable setting some data on it. Next patch from this series will use the above functionality. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yishai Hadas <yishaih@nvidia.com> Link: https://lore.kernel.org/r/20210826103912.128972-10-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> 
Add 'override_only' field to struct pci_device_id to be used as part of
pci_match_device().

When set, a driver only matches the entry when dev->driver_override is
set to that driver.

In addition, add a helper macro named 'PCI_DEVICE_DRIVER_OVERRIDE' to
enable setting some data on it.

Next patch from this series will use the above functionality.

Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20210826103912.128972-10-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
rpmsg: core: Add driver_data for rpmsg_device_id 2021-06-18T20:13:40+00:00 Stephan Gerhold stephan@gerhold.net 2021-06-18T17:36:09+00:00 60302ce4ea075369641426ef407c110e36ea8ba1 Most device_id structs provide a driver_data field that can be used by drivers to associate data more easily for a particular device ID. Add the same for the rpmsg_device_id. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: David S. Miller <davem@davemloft.net> 
Most device_id structs provide a driver_data field that can be used
by drivers to associate data more easily for a particular device ID.
Add the same for the rpmsg_device_id.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2021-02-24T18:25:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-02-24T18:25:37+00:00 e229b429bb4af24d9828758c0c851bb6a4169400 Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ... 
Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc/whatever driver subsystem updates
  for 5.12-rc1. Over time it seems like this tree is collecting more and
  more tiny driver subsystems in one place, making it easier for those
  maintainers, which is why this is getting larger.

  Included in here are:

   - coresight driver updates

   - habannalabs driver updates

   - virtual acrn driver addition (proper acks from the x86 maintainers)

   - broadcom misc driver addition

   - speakup driver updates

   - soundwire driver updates

   - fpga driver updates

   - amba driver updates

   - mei driver updates

   - vfio driver updates

   - greybus driver updates

   - nvmeem driver updates

   - phy driver updates

   - mhi driver updates

   - interconnect driver udpates

   - fsl-mc bus driver updates

   - random driver fix

   - some small misc driver updates (rtsx, pvpanic, etc.)

  All of these have been in linux-next for a while, with the only
  reported issue being a merge conflict due to the dfl_device_id
  addition from the fpga subsystem in here"

* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
  spmi: spmi-pmic-arb: Fix hw_irq overflow
  Documentation: coresight: Add PID tracing description
  coresight: etm-perf: Support PID tracing for kernel at EL2
  coresight: etm-perf: Clarify comment on perf options
  ACRN: update MAINTAINERS: mailing list is subscribers-only
  regmap: sdw-mbq: use MODULE_LICENSE("GPL")
  regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
  regmap: sdw: use _no_pm functions in regmap_read/write
  soundwire: intel: fix possible crash when no device is detected
  MAINTAINERS: replace my with email with replacements
  mhi: Fix double dma free
  uapi: map_to_7segment: Update example in documentation
  uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
  drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
  firewire: replace tricky statement by two simple ones
  vme: make remove callback return void
  firmware: google: make coreboot driver's remove callback return void
  firmware: xilinx: Use explicit values for all enum values
  sample/acrn: Introduce a sample of HSM ioctl interface usage
  virt: acrn: Introduce an interface for Service VM to control vCPU
  ...
fpga: dfl: move dfl_device_id to mod_devicetable.h 2021-01-07T14:21:27+00:00 Xu Yilun yilun.xu@intel.com 2021-01-07T04:37:10+00:00 9326eecd9365a5b82220a4011592f7c0209566fc In order to support MODULE_DEVICE_TABLE() for dfl device driver, this patch moves struct dfl_device_id to mod_devicetable.h Some brief description for DFL (Device Feature List) is added to make the DFL known to the whole kernel. Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Link: https://lore.kernel.org/r/20210107043714.991646-5-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In order to support MODULE_DEVICE_TABLE() for dfl device driver, this
patch moves struct dfl_device_id to mod_devicetable.h

Some brief description for DFL (Device Feature List) is added to make
the DFL known to the whole kernel.

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-5-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
platform/surface: aggregator: Add dedicated bus and device type 2021-01-06T23:06:39+00:00 Maximilian Luz luzmaximilian@gmail.com 2020-12-21T18:39:56+00:00 eb0e90a82098d4a48308abb87d2087578a83987f The Surface Aggregator EC provides varying functionality, depending on the Surface device. To manage this functionality, we use dedicated client devices for each subsystem or virtual device of the EC. While some of these clients are described as standard devices in ACPI and the corresponding client drivers can be implemented as platform drivers in the kernel (making use of the controller API already present), many devices, especially on newer Surface models, cannot be found there. To simplify management of these devices, we introduce a new bus and client device type for the Surface Aggregator subsystem. The new device type takes care of managing the controller reference, essentially guaranteeing its validity for as long as the client device exists, thus alleviating the need to manually establish device links for that purpose in the client driver (as has to be done with the platform devices). Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> 
The Surface Aggregator EC provides varying functionality, depending on
the Surface device. To manage this functionality, we use dedicated
client devices for each subsystem or virtual device of the EC. While
some of these clients are described as standard devices in ACPI and the
corresponding client drivers can be implemented as platform drivers in
the kernel (making use of the controller API already present), many
devices, especially on newer Surface models, cannot be found there.

To simplify management of these devices, we introduce a new bus and
client device type for the Surface Aggregator subsystem. The new device
type takes care of managing the controller reference, essentially
guaranteeing its validity for as long as the client device exists, thus
alleviating the need to manually establish device links for that purpose
in the client driver (as has to be done with the platform devices).

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add auxiliary bus support 2020-12-04T11:23:25+00:00 Dave Ertman david.m.ertman@intel.com 2020-12-03T00:54:24+00:00 7de3697e9cbd4bd3d62bafa249d57990e1b8f294 Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver. It enables drivers to create an auxiliary_device and bind an auxiliary_driver to it. The bus supports probe/remove shutdown and suspend/resume callbacks. Each auxiliary_device has a unique string based id; driver binds to an auxiliary_device based on this id through the bus. Co-developed-by: Kiran Patil <kiran.patil@intel.com> Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Co-developed-by: Fred Oh <fred.oh@linux.intel.com> Co-developed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Fred Oh <fred.oh@linux.intel.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Martin Habets <mhabets@solarflare.com> Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.

The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.

Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next 2020-07-23T07:12:15+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2020-07-23T07:12:15+00:00 575ec5e5e943aaea06a6043e87f9759066230039 Vinod writes: soundwire updates for 5.9-rc1 This contains few core changes and bunch of Intel driver updates: - Adds definitions for 1.2 spec - Sanyog left as a MAINTAINER and Bard took his place while Sanyog is a reviewer now. - Intel: Lots of updates to stream/dai handling, wake support and link synchronization. * tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits) Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx soundwire: intel: add wake interrupt support soundwire: intel/cadence: merge Soundwire interrupt handlers/threads soundwire: intel_init: use EXPORT_SYMBOL_NS soundwire: intel_init: add implementation of sdw_intel_enable_irq() soundwire: intel: introduce helper for link synchronization soundwire: intel: introduce a helper to arm link synchronization soundwire: intel: revisit SHIM programming sequences. soundwire: intel: reuse code for wait loops to set/clear bits soundwire: fix the kernel-doc comment soundwire: sdw.h: fix indentation soundwire: sdw.h: fix PRBS/Static_1 swapped definitions soundwire: intel: don't free dma_data in DAI shutdown soundwire: cadence: allocate/free dma_data in set_sdw_stream soundwire: intel: remove stream allocation/free soundwire: stream: add helper to startup/shutdown streams soundwire: intel: implement get_sdw_stream() operations MAINTAINERS: change SoundWire maintainer soundwire: bus: initialize bus clock base and scale registers soundwire: extend SDW_SLAVE_ENTRY ... 
Vinod writes:

soundwire updates for 5.9-rc1

This contains few core changes and bunch of Intel driver updates:

 - Adds definitions for 1.2 spec
 - Sanyog left as a MAINTAINER and Bard took his place while Sanyog
   is a reviewer now.
 - Intel: Lots of updates to stream/dai handling, wake support and link
   synchronization.

* tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits)
  Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
  soundwire: intel: add wake interrupt support
  soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
  soundwire: intel_init: use EXPORT_SYMBOL_NS
  soundwire: intel_init: add implementation of sdw_intel_enable_irq()
  soundwire: intel: introduce helper for link synchronization
  soundwire: intel: introduce a helper to arm link synchronization
  soundwire: intel: revisit SHIM programming sequences.
  soundwire: intel: reuse code for wait loops to set/clear bits
  soundwire: fix the kernel-doc comment
  soundwire: sdw.h: fix indentation
  soundwire: sdw.h: fix PRBS/Static_1 swapped definitions
  soundwire: intel: don't free dma_data in DAI shutdown
  soundwire: cadence: allocate/free dma_data in set_sdw_stream
  soundwire: intel: remove stream allocation/free
  soundwire: stream: add helper to startup/shutdown streams
  soundwire: intel: implement get_sdw_stream() operations
  MAINTAINERS: change SoundWire maintainer
  soundwire: bus: initialize bus clock base and scale registers
  soundwire: extend SDW_SLAVE_ENTRY
  ...
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input 2020-07-14T01:31:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-07-14T01:31:15+00:00 e9919e11e219eaa5e8041b7b1a196839143e9125 Pull input fixes from Dmitry Torokhov: "A few quirks for the Elan touchpad driver, another Thinkpad is being switched over from PS/2 to native RMI4 interface, and we gave a brand new SW_MACHINE_COVER switch definition" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - add more hardware ID for Lenovo laptops Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list Revert "Input: elants_i2c - report resolution information for touch major" Input: elan_i2c - only increment wakeup count on touch Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen ARM: dts: n900: remove mmc1 card detect gpio Input: add `SW_MACHINE_COVER` 
Pull input fixes from Dmitry Torokhov:
 "A few quirks for the Elan touchpad driver, another Thinkpad is being
  switched over from PS/2 to native RMI4 interface, and we gave a brand
  new SW_MACHINE_COVER switch definition"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add more hardware ID for Lenovo laptops
  Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
  Revert "Input: elants_i2c - report resolution information for touch major"
  Input: elan_i2c - only increment wakeup count on touch
  Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
  ARM: dts: n900: remove mmc1 card detect gpio
  Input: add `SW_MACHINE_COVER`