linux-stable.git/include/linux/mmc/host.h, branch linux-2.6.34.y

mmc: fix all hangs related to mmc/sd card insert/removal during suspend/resume

2012-03-14T14:57:45+00:00

commit 4c2ef25fe0b847d2ae818f74758ddb0be1c27d8e upstream.

If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to
suspend, the card will be removed, therefore this patch doesn't change the
behavior of this option.

However the removal will be done by pm notifier, which runs while
userspace is still not frozen and thus can freely use del_gendisk, without
the risk of deadlock which would happen otherwise.

Card detect workqueue is now disabled while userspace is frozen, Therefore
if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during
suspend, the removal will be detected as soon as userspace is unfrozen,
again at the moment it is safe to call del_gendisk.

Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate.

[akpm@linux-foundation.org: clean up function prototype]
[akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Maxim Levitsky 
Cc: David Brownell 
Cc: Alan Stern 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 

Signed-off-by: Paul Gortmaker

sdio: introduce API for special power management features

2010-03-06T19:26:36+00:00

This patch series provides the core changes needed to allow SDIO cards to
remain powered and active while the host system is suspended, and let them
wake up the host system when needed.  This is used to implement
wake-on-lan with SDIO wireless cards at the moment.  Patches to add that
support to the libertas driver will be posted separately.

This patch:

Some SDIO cards have the ability to keep on running autonomously when the
host system is suspended, and wake it up when needed.  This however
requires that the host controller preserve power to the card, and
configure itself appropriately for wake-up.

There is however 4 layers of abstractions involved: the host controller
driver, the MMC core code, the SDIO card management code, and the actual
SDIO function driver.  To make things simple and manageable, host drivers
must advertise their PM capabilities with a feature bitmask, then function
drivers can query and set those features from their suspend method.  Then
each layer in the suspend call chain is expected to act upon those bits
accordingly.

[akpm@linux-foundation.org: fix typo in comment]
Signed-off-by: Nicolas Pitre 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

headers: remove sched.h from interrupt.h

2009-10-11T18:20:58+00:00

After m68k's task_thread_info() doesn't refer to current,
it's possible to remove sched.h from interrupt.h and not break m68k!
Many thanks to Heiko Carstens for allowing this.

Signed-off-by: Alexey Dobriyan

mmc: add mmc card sleep and awake support

2009-09-23T14:39:33+00:00

Add support for the new MMC command SLEEP_AWAKE.

Signed-off-by: Jarkko Lavinen 
Signed-off-by: Adrian Hunter 
Acked-by: Matt Fleming 
Cc: Ian Molton 
Cc: "Roberto A. Foglietta" 
Cc: Jarkko Lavinen 
Cc: Denis Karpov 
Cc: Pierre Ossman 
Cc: Philip Langdale 
Cc: "Madhusudhan" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mmc: add ability to save power by powering off cards

2009-09-23T14:39:33+00:00

Power can be saved by powering off cards that are not in use.  This is
similar to suspend / resume except it is under the control of the driver,
and does not require any power management support.  It can only be used
when the driver can monitor whether the card is removed, otherwise it is
unsafe.  This is possible because, unlike suspend, the driver still
receives card detect and / or cover switch interrupts.

Signed-off-by: Adrian Hunter 
Acked-by: Matt Fleming 
Cc: Ian Molton 
Cc: "Roberto A. Foglietta" 
Cc: Jarkko Lavinen 
Cc: Denis Karpov 
Cc: Pierre Ossman 
Cc: Philip Langdale 
Cc: "Madhusudhan" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mmc: add MMC_CAP_NONREMOVABLE host capability

2009-09-23T14:39:33+00:00

eMMC's are not removable, so unsafe resume is OK always.

To permit this a new host capability MMC_CAP_NONREMOVABLE has been added
and suspend / resume updated accordingly.

Signed-off-by: Adrian Hunter 
Acked-by: Matt Fleming 
Cc: Ian Molton 
Cc: "Roberto A. Foglietta" 
Cc: Jarkko Lavinen 
Cc: Denis Karpov 
Cc: Pierre Ossman 
Cc: Philip Langdale 
Cc: "Madhusudhan" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mmc: allow host claim / release nesting

2009-09-23T14:39:33+00:00

This change allows the MMC host to be claimed in situations where the host
may or may not have already been claimed.  Also 'mmc_try_claim_host()' is
now exported.

Signed-off-by: Adrian Hunter 
Acked-by: Matt Fleming 
Cc: Ian Molton 
Cc: "Roberto A. Foglietta" 
Cc: Jarkko Lavinen 
Cc: Denis Karpov 
Cc: Pierre Ossman 
Cc: Philip Langdale 
Cc: "Madhusudhan" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mmc: add 'enable' and 'disable' methods to mmc host

2009-09-23T14:39:33+00:00

MMC hosts that support power saving can use the 'enable' and 'disable'
methods to exit and enter power saving states.  An explanation of their
use is provided in the comments added to include/linux/mmc/host.h.

Signed-off-by: Adrian Hunter 
Acked-by: Matt Fleming 
Cc: Ian Molton 
Cc: "Roberto A. Foglietta" 
Cc: Jarkko Lavinen 
Cc: Denis Karpov 
Cc: Pierre Ossman 
Cc: Philip Langdale 
Cc: "Madhusudhan" 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

MMC: regulator utilities

2009-03-31T08:56:26+00:00

Glue between MMC and regulator stacks ... verified with
some OMAP3 boards using adjustable and configured-as-fixed
regulators on several MMC controllers.

These calls are intended to be used by MMC host adapters
using at least one regulator per host.  Examples include
slots with regulators supporting multiple voltages and
ones using multiple voltage rails (e.g. DAT4..DAT7 using a
separate supply, or a split rail chip like certain SDIO
WLAN or eMMC solutions).

Signed-off-by: David Brownell 
Acked-by: Pierre Ossman 
Signed-off-by: Liam Girdwood

mmc: Add 8-bit bus width support

2008-12-31T17:18:12+00:00

Signed-off-by: Jarkko Lavinen 
Signed-off-by: Pierre Ossman