linux-stable.git/include/linux/mlx5, branch linux-6.7.y

RDMA/mlx5: Fix fortify source warning while accessing Eth segment

2024-03-26T22:17:51+00:00

[ Upstream commit 4d5e86a56615cc387d21c629f9af8fb0e958d350 ]

 ------------[ cut here ]------------
 memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2)
 WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy
  [last unloaded: mlx_compat(OE)]
 CPU: 0 PID: 293779 Comm: ssh Tainted: G           OE      6.2.0-32-generic #32~22.04.1-Ubuntu
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
 Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7
 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046
 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8
 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80
 FS:  00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  
  ? show_regs+0x72/0x90
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? __warn+0x8d/0x160
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  ? report_bug+0x1bb/0x1d0
  ? handle_bug+0x46/0x90
  ? exc_invalid_op+0x19/0x80
  ? asm_exc_invalid_op+0x1b/0x20
  ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib]
  mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib]
  ipoib_send+0x2ec/0x770 [ib_ipoib]
  ipoib_start_xmit+0x5a0/0x770 [ib_ipoib]
  dev_hard_start_xmit+0x8e/0x1e0
  ? validate_xmit_skb_list+0x4d/0x80
  sch_direct_xmit+0x116/0x3a0
  __dev_xmit_skb+0x1fd/0x580
  __dev_queue_xmit+0x284/0x6b0
  ? _raw_spin_unlock_irq+0xe/0x50
  ? __flush_work.isra.0+0x20d/0x370
  ? push_pseudo_header+0x17/0x40 [ib_ipoib]
  neigh_connected_output+0xcd/0x110
  ip_finish_output2+0x179/0x480
  ? __smp_call_single_queue+0x61/0xa0
  __ip_finish_output+0xc3/0x190
  ip_finish_output+0x2e/0xf0
  ip_output+0x78/0x110
  ? __pfx_ip_finish_output+0x10/0x10
  ip_local_out+0x64/0x70
  __ip_queue_xmit+0x18a/0x460
  ip_queue_xmit+0x15/0x30
  __tcp_transmit_skb+0x914/0x9c0
  tcp_write_xmit+0x334/0x8d0
  tcp_push_one+0x3c/0x60
  tcp_sendmsg_locked+0x2e1/0xac0
  tcp_sendmsg+0x2d/0x50
  inet_sendmsg+0x43/0x90
  sock_sendmsg+0x68/0x80
  sock_write_iter+0x93/0x100
  vfs_write+0x326/0x3c0
  ksys_write+0xbd/0xf0
  ? do_syscall_64+0x69/0x90
  __x64_sys_write+0x19/0x30
  do_syscall_64+0x59/0x90
  ? do_user_addr_fault+0x1d0/0x640
  ? exit_to_user_mode_prepare+0x3b/0xd0
  ? irqentry_exit_to_user_mode+0x9/0x20
  ? irqentry_exit+0x43/0x50
  ? exc_page_fault+0x92/0x1b0
  entry_SYSCALL_64_after_hwframe+0x72/0xdc
 RIP: 0033:0x7fc03ad14a37
 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37
 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003
 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002
 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50
  
 ---[ end trace 0000000000000000 ]---

Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky 
Signed-off-by: Sasha Levin

net/mlx5: Check capability for fw_reset

2024-03-15T14:48:16+00:00

[ Upstream commit 5e6107b499f3fc4748109e1d87fd9603b34f1e0d ]

Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.

Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.

In addition, return not supported on devlink reload action fw_activate
for these functions.

Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh 
Reviewed-by: Aya Levin 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin

IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported

2024-03-01T12:41:52+00:00

[ Upstream commit 43fdbd140238d44e7e847232719fef7d20f9d326 ]

debugfs entries for RRoCE general CC parameters must be exposed only when
they are supported, otherwise when accessing them there may be a syndrome
error in kernel log, for example:

$ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp
cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument
$ dmesg
 mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22)

Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters")
Reviewed-by: Edward Srouji 
Signed-off-by: Mark Zhang 
Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky 
Signed-off-by: Sasha Levin

net/mlx5: Bridge, fix multicast packets sent to uplink

2024-02-01T00:21:08+00:00

[ Upstream commit ec7cc38ef9f83553102e84c82536971a81630739 ]

To enable multicast packets which are offloaded in bridge multicast
offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should
be set. Add this bit to FTE for the bridge multicast offload rules.

Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets")
Signed-off-by: Moshe Shemesh 
Reviewed-by: Gal Pressman 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Sasha Levin

net/mlx5e: Tidy up IPsec NAT-T SA discovery

2023-12-05T06:11:52+00:00

IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.

That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.

Fixes: d65954934937 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky

net/mlx5e: Honor user choice of IPsec replay window size

2023-12-05T06:11:51+00:00

Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.

Fixes: 7db21ef4566e ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad 
Signed-off-by: Leon Romanovsky

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2023-11-05T19:02:32+00:00

Pull virtio updates from Michael Tsirkin:
 "vhost,virtio,vdpa: features, fixes, cleanups.

  vdpa/mlx5:
   - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
   - new maintainer

  vdpa:
   - support for vq descriptor mappings
   - decouple reset of iotlb mapping from device reset

  and fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits)
  vdpa_sim: implement .reset_map support
  vdpa/mlx5: implement .reset_map driver op
  vhost-vdpa: clean iotlb map during reset for older userspace
  vdpa: introduce .compat_reset operation callback
  vhost-vdpa: introduce IOTLB_PERSIST backend feature bit
  vhost-vdpa: reset vendor specific mapping to initial state in .release
  vdpa: introduce .reset_map operation callback
  virtio_pci: add check for common cfg size
  virtio-blk: fix implicit overflow on virtio_max_dma_size
  virtio_pci: add build offset check for the new common cfg items
  virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit
  vduse: make vduse_class constant
  vhost-scsi: Spelling s/preceeding/preceding/g
  virtio: kdoc for struct virtio_pci_modern_device
  vdpa: Update sysfs ABI documentation
  MAINTAINERS: Add myself as mlx5_vdpa driver
  virtio-balloon: correct the comment of virtballoon_migratepage()
  mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
  vdpa/mlx5: Update cvq iotlb mapping on ASID change
  vdpa/mlx5: Make iotlb helper functions more generic
  ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2023-11-03T01:20:30+00:00

Pull rdma updates from Jason Gunthorpe:
 "Nothing exciting this cycle, most of the diffstat is changing SPDX
  'or' to 'OR'.

  Summary:

   - Bugfixes for hns, mlx5, and hfi1

   - Hardening patches for size_*, counted_by, strscpy

   - rts fixes from static analysis

   - Dump SRQ objects in rdma netlink, with hns support

   - Fix a performance regression in mlx5 MR deregistration

   - New XDR (200Gb/lane) link speed

   - SRQ record doorbell latency optimization for hns

   - IPSEC support for mlx5 multi-port mode

   - ibv_rereg_mr() support for irdma

   - Affiliated event support for bnxt_re

   - Opt out for the spec compliant qkey security enforcement as we
     discovered SW that breaks under enforcement

   - Comment and trivial updates"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
  IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
  RDMA/mlx5: Fix mkey cache WQ flush
  RDMA/hfi1: Workaround truncation compilation error
  IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
  RDMA/core: Remove NULL check before dev_{put, hold}
  RDMA/hfi1: Remove redundant assignment to pointer ppd
  RDMA/mlx5: Change the key being sent for MPV device affiliation
  RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
  RDMA/hns: Fix init failure of RoCE VF and HIP08
  RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
  RDMA/hns: The UD mode can only be configured with DCQCN
  RDMA/hns: Add check for SL
  RDMA/hns: Fix signed-unsigned mixed comparisons
  RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
  RDMA/hns: Fix printing level of asynchronous events
  RDMA/core: Add support to set privileged QKEY parameter
  RDMA/bnxt_re: Do not report SRQ error in srq notification
  RDMA/bnxt_re: Report async events and errors
  RDMA/bnxt_re: Update HW interface headers
  IB/mlx5: Fix rdma counter binding for RAW QP
  ...

vdpa/mlx5: Enable hw support for vq descriptor mapping

2023-11-01T13:19:57+00:00

Vq descriptor mappings are supported in hardware by filling in an
additional mkey which contains the descriptor mappings to the hw vq.

A previous patch in this series added support for hw mkey (mr) creation
for ASID 1.

This patch fills in both the vq data and vq descriptor mkeys based on
group ASID mapping.

The feature is signaled to the vdpa core through the presence of the
.get_vq_desc_group op.

Acked-by: Jason Wang 
Acked-by: Eugenio Pérez 
Signed-off-by: Dragos Tatulea 
Message-Id: <20231018171456.1624030-16-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin 
Reviewed-by: Si-Wei Liu 
Tested-by: Si-Wei Liu 
Tested-by: Lei Yang

net/mlx5: Remove unused declaration

2023-10-14T17:16:31+00:00

Commit 2ac9cfe78223 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path")
declared mlx5e_ipsec_inverse_table_init() but never implemented it.
Commit f52f2faee581 ("net/mlx5e: Introduce flow steering API")
declared mlx5e_fs_set_tc() but never implemented it.
Commit f2f3df550139 ("net/mlx5: EQ, Privatize eq_table and friends")
declared mlx5_eq_comp_cpumask() but never implemented it.
Commit cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed")
removed mlx5_lag_update() but not its declaration.
Commit 35ba005d820b ("net/mlx5: DR, Set flex parser for TNL_MPLS dynamically")
removed mlx5dr_ste_build_tnl_mpls() but not its declaration.

Commit e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
declared but never implemented mlx5_alloc_cmd_mailbox_chain() and mlx5_free_cmd_mailbox_chain().
Commit 0cf53c124756 ("net/mlx5: FWPage, Use async events chain")
removed mlx5_core_req_pages_handler() but not its declaration.
Commit 938fe83c8dcb ("net/mlx5_core: New device capabilities handling")
removed mlx5_query_odp_caps() but not its declaration.
Commit f6a8a19bb11b ("RDMA/netdev: Hoist alloc_netdev_mqs out of the driver")
removed mlx5_rdma_netdev_alloc() but not its declaration.

Signed-off-by: Yue Haibing 
Reviewed-by: Leon Romanovsky 
Reviewed-by: Simon Horman 
Reviewed-by: Jacob Keller 
Signed-off-by: Saeed Mahameed