linux-stable.git/include/linux/mlx5, branch linux-6.3.y Linux kernel stable tree RDMA/mlx5: Fix affinity assignment 2023-06-21T14:02:15+00:00 Mark Bloch mbloch@nvidia.com 2023-06-05T10:33:26+00:00 58b5965c0d5aba1f905062faf4d8a8d7256b3a12 [ Upstream commit 617f5db1a626f18d5cbb7c7faf7bf8f9ea12be78 ] The cited commit aimed to ensure that Virtual Functions (VFs) assign a queue affinity to a Queue Pair (QP) to distribute traffic when the LAG master creates a hardware LAG. If the affinity was set while the hardware was not in LAG, the firmware would ignore the affinity value. However, this commit unintentionally assigned an affinity to QPs on the LAG master's VPORT even if the RDMA device was not marked as LAG-enabled. In most cases, this was not an issue because when the hardware entered hardware LAG configuration, the RDMA device of the LAG master would be destroyed and a new one would be created, marked as LAG-enabled. The problem arises when a user configures Equal-Cost Multipath (ECMP). In ECMP mode, traffic can be directed to different physical ports based on the queue affinity, which is intended for use by VPORTS other than the E-Switch manager. ECMP mode is supported only if both E-Switch managers are in switchdev mode and the appropriate route is configured via IP. In this configuration, the RDMA device is not destroyed, and we retain the RDMA device that is not marked as LAG-enabled. To ensure correct behavior, Send Queues (SQs) opened by the E-Switch manager through verbs should be assigned strict affinity. This means they will only be able to communicate through the native physical port associated with the E-Switch manager. This will prevent the firmware from assigning affinity and will not allow the SQs to be remapped in case of failover. Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode") Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 617f5db1a626f18d5cbb7c7faf7bf8f9ea12be78 ]

The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.

However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.

The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.

To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.

Fixes: 802dcc7fc5ec ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net/mlx5e: Use query_special_contexts cmd only once per mdev 2023-06-09T08:47:50+00:00 Dragos Tatulea dtatulea@nvidia.com 2023-04-13T12:48:30+00:00 c85e8edcb2d554ba46d31ab09c1a9111974b68ab [ Upstream commit 1db1f21caebbb1b6e9b1e7657df613616be3fb49 ] Don't query the firmware so many times (num rqs * num wqes * wqe frags) because it slows down linearly the interface creation time when the product is larger. Do it only once per mdev and store the result in mlx5e_param. Due to helper function being called from different files, move it to an appropriate location. Rename the function with a proper prefix and add a small cleanup. This fix applies only for legacy rq. Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 1db1f21caebbb1b6e9b1e7657df613616be3fb49 ]

Don't query the firmware so many times (num rqs * num wqes * wqe frags)
because it slows down linearly the interface creation time when the
product is larger. Do it only once per mdev and store the result in
mlx5e_param.

Due to helper function being called from different files, move it to
an appropriate location. Rename the function with a proper prefix and
add a small cleanup.

This fix applies only for legacy rq.

Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
net/mlx5: DR, Check force-loopback RC QP capability independently from RoCE 2023-05-30T13:17:27+00:00 Yevgeny Kliteynik kliteyn@nvidia.com 2023-04-02T14:14:10+00:00 b44e218669dafdaf0a1b5b58f8d150680193a4f2 commit c7dd225bc224726c22db08e680bf787f60ebdee3 upstream. SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB (loopback), and FL (force-loopback) QP is preferred for performance. FL is available when RoCE is enabled or disabled based on RoCE caps. This patch adds reading of FL capability from HCA caps in addition to the existing reading from RoCE caps, thus fixing the case where we didn't have loopback enabled when RoCE was disabled. Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP") Signed-off-by: Itamar Gozlan <igozlan@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit c7dd225bc224726c22db08e680bf787f60ebdee3 upstream.

SW Steering uses RC QP for writing STEs to ICM. This writingis done in LB
(loopback), and FL (force-loopback) QP is preferred for performance. FL is
available when RoCE is enabled or disabled based on RoCE caps.
This patch adds reading of FL capability from HCA caps in addition to the
existing reading from RoCE caps, thus fixing the case where we didn't
have loopback enabled when RoCE was disabled.

Fixes: 7304d603a57a ("net/mlx5: DR, Add support for force-loopback QP")
Signed-off-by: Itamar Gozlan <igozlan@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RDMA/mlx5: Fix flow counter query via DEVX 2023-05-11T14:17:33+00:00 Mark Bloch mbloch@nvidia.com 2023-04-13T09:23:09+00:00 abe73a71ecb4cc5e7cf4bd521d2937ba6de09867 [ Upstream commit 3e358ea8614ddfbc59ca7a3f5dff5dde2b350b2c ] Commit cited in "fixes" tag added bulk support for flow counters but it didn't account that's also possible to query a counter using a non-base id if the counter was allocated as bulk. When a user performs a query, validate the flow counter id given in the mailbox is inside the valid range taking bulk value into account. Fixes: 208d70f562e5 ("IB/mlx5: Support flow counters offset for bulk counters") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/79d7fbe291690128e44672418934256254d93115.1681377114.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 3e358ea8614ddfbc59ca7a3f5dff5dde2b350b2c ]

Commit cited in "fixes" tag added bulk support for flow counters but it
didn't account that's also possible to query a counter using a non-base id
if the counter was allocated as bulk.

When a user performs a query, validate the flow counter id given in the
mailbox is inside the valid range taking bulk value into account.

Fixes: 208d70f562e5 ("IB/mlx5: Support flow counters offset for bulk counters")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/79d7fbe291690128e44672418934256254d93115.1681377114.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Revert "net/mlx5: Enable management PF initialization" 2023-04-20T01:51:28+00:00 Jakub Kicinski kuba@kernel.org 2023-04-13T22:25:47+00:00 f52cc627b832e08a7bcf1b7e81e650ec308fe1d8 This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4. Paul reports that it causes a regression with IB on CX4 and FW 12.18.1000. In addition I think that the concept of "management PF" is not fully accepted and requires a discussion. Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization") Reported-by: Paul Moore <paul@paul-moore.com> Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/ Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> 
This reverts commit fe998a3c77b9f989a30a2a01fb00d3729a6d53a4.

Paul reports that it causes a regression with IB on CX4
and FW 12.18.1000. In addition I think that the concept
of "management PF" is not fully accepted and requires
a discussion.

Fixes: fe998a3c77b9 ("net/mlx5: Enable management PF initialization")
Reported-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/all/CAHC9VhQ7A4+msL38WpbOMYjAqLp0EtOjeLh4Dc6SQtD6OUvCQg@mail.gmail.com/
Link: https://lore.kernel.org/r/20230413222547.56901-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type 2023-04-13T18:15:10+00:00 Jesper Dangaard Brouer brouer@redhat.com 2023-04-12T19:48:45+00:00 67f245c2ec0af17d7a90c78910e28bc8b206297c Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type via mapping table. The mlx5 hardware can also identify and RSS hash IPSEC. This indicate hash includes SPI (Security Parameters Index) as part of IPSEC hash. Extend xdp core enum xdp_rss_hash_type with IPSEC hash type. Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoul Signed-off-by: Alexei Starovoitov <ast@kernel.org> 
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.

The mlx5 hardware can also identify and RSS hash IPSEC.  This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.

Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.

Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma 2023-02-24T23:11:03+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-24T23:11:03+00:00 8cbd92339db08b19b93d1637e5799ff2a8dddfd2 Pull rdma updates from Jason Gunthorpe: "Quite a small cycle this time, even with the rc8. I suppose everyone went to sleep over xmas. - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw, mana - inline CQE support for hns - Have mlx5 display device error codes - Pinned DMABUF support for irdma - Continued rxe cleanups, particularly converting the MRs to use xarray - Improvements to what can be cached in the mlx5 mkey cache" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits) IB/mlx5: Extend debug control for CC parameters IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors IB/hfi1: Fix math bugs in hfi1_can_pin_pages() RDMA/irdma: Add support for dmabuf pin memory regions RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys RDMA/rxe: Fix missing memory barriers in rxe_queue.h RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet RDMA/rxe: Remove rxe_alloc() RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size Subject: RDMA/rxe: Handle zero length rdma iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() RDMA/mlx5: Use rdma_umem_for_each_dma_block() RDMA/umem: Remove unused 'work' member from struct ib_umem RDMA/irdma: Cap MSIX used to online CPUs + 1 RDMA/mlx5: Check reg_create() create for errors RDMA/restrack: Correct spelling RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() ... 
Pull rdma updates from Jason Gunthorpe:
 "Quite a small cycle this time, even with the rc8. I suppose everyone
  went to sleep over xmas.

   - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw,
     mana

   - inline CQE support for hns

   - Have mlx5 display device error codes

   - Pinned DMABUF support for irdma

   - Continued rxe cleanups, particularly converting the MRs to use
     xarray

   - Improvements to what can be cached in the mlx5 mkey cache"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits)
  IB/mlx5: Extend debug control for CC parameters
  IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors
  IB/hfi1: Fix math bugs in hfi1_can_pin_pages()
  RDMA/irdma: Add support for dmabuf pin memory regions
  RDMA/mlx5: Use query_special_contexts for mkeys
  net/mlx5e: Use query_special_contexts for mkeys
  net/mlx5: Change define name for 0x100 lkey value
  net/mlx5: Expose bits for querying special mkeys
  RDMA/rxe: Fix missing memory barriers in rxe_queue.h
  RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet
  RDMA/rxe: Remove rxe_alloc()
  RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size
  Subject: RDMA/rxe: Handle zero length rdma
  iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry()
  RDMA/mlx5: Use rdma_umem_for_each_dma_block()
  RDMA/umem: Remove unused 'work' member from struct ib_umem
  RDMA/irdma: Cap MSIX used to online CPUs + 1
  RDMA/mlx5: Check reg_create() create for errors
  RDMA/restrack: Correct spelling
  RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish()
  ...
IB/mlx5: Extend debug control for CC parameters 2023-02-19T09:50:59+00:00 Edward Srouji edwards@nvidia.com 2023-02-16T09:13:45+00:00 66fb1d5df6ace316a4a6e2c31e13fc123ea2b644 This patch adds rtt_resp_dscp to the current debug controllability of congestion control (CC) parameters. rtt_resp_dscp can be read or written through debugfs. If set, its value overwrites the DSCP of the generated RTT response. Signed-off-by: Edward Srouji <edwards@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Link: https://lore.kernel.org/r/1dcc3440ee53c688f19f579a051ded81a2aaa70a.1676538714.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org> 
This patch adds rtt_resp_dscp to the current debug controllability of
congestion control (CC) parameters.
rtt_resp_dscp can be read or written through debugfs.
If set, its value overwrites the DSCP of the generated RTT response.

Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/1dcc3440ee53c688f19f579a051ded81a2aaa70a.1676538714.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Merge mlx5-next into rdma.git for-next 2023-02-17T20:24:14+00:00 Jason Gunthorpe jgg@nvidia.com 2023-02-17T20:24:14+00:00 5ef17179da7b779b3029d9a7d3871ba09279d56c Synchronize the shared mlx5 branch with net: - From Jiri: fixe a deadlock in mlx5_ib's netdev notifier unregister. - From Mark and Patrisious: add IPsec RoCEv2 support. - From Or: Rely on firmware to get special mkeys * branch mlx5-next: RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys net/mlx5: Configure IPsec steering for egress RoCEv2 traffic net/mlx5: Configure IPsec steering for ingress RoCEv2 traffic net/mlx5: Add IPSec priorities in RDMA namespaces net/mlx5: Implement new destination type TABLE_TYPE net/mlx5: Introduce new destination type TABLE_TYPE RDMA/mlx5: Track netdev to avoid deadlock during netdev notifier unregister net/mlx5e: Propagate an internal event in case uplink netdev changes net/mlx5e: Fix trap event handling Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 
Synchronize the shared mlx5 branch with net:
 - From Jiri: fixe a deadlock in mlx5_ib's netdev notifier unregister.
 - From Mark and Patrisious: add IPsec RoCEv2 support.
 - From Or: Rely on firmware to get special mkeys

* branch mlx5-next:
  RDMA/mlx5: Use query_special_contexts for mkeys
  net/mlx5e: Use query_special_contexts for mkeys
  net/mlx5: Change define name for 0x100 lkey value
  net/mlx5: Expose bits for querying special mkeys
  net/mlx5: Configure IPsec steering for egress RoCEv2 traffic
  net/mlx5: Configure IPsec steering for ingress RoCEv2 traffic
  net/mlx5: Add IPSec priorities in RDMA namespaces
  net/mlx5: Implement new destination type TABLE_TYPE
  net/mlx5: Introduce new destination type TABLE_TYPE
  RDMA/mlx5: Track netdev to avoid deadlock during netdev notifier unregister
  net/mlx5e: Propagate an internal event in case uplink netdev changes
  net/mlx5e: Fix trap event handling

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
net/mlx5: Change define name for 0x100 lkey value 2023-02-17T20:22:22+00:00 Or Har-Toov ohartoov@nvidia.com 2023-01-17T13:14:50+00:00 a419bfb7632095410adc3aecb1e863568f049add Change define of 0x100 lkey value from MLX5_INVALID_LKEY to be MLX5_TERMINATE_SCATTER_LIST_LKEY as 0x100 is the value of terminate_scatter_list_mkey. Link: https://lore.kernel.org/r/3a116dc3fbae4cb6b76a63d27d418830b06ade0c.1673960981.git.leon@kernel.org Signed-off-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> 
Change define of 0x100 lkey value from MLX5_INVALID_LKEY to be
MLX5_TERMINATE_SCATTER_LIST_LKEY as 0x100 is the value of
terminate_scatter_list_mkey.

Link: https://lore.kernel.org/r/3a116dc3fbae4cb6b76a63d27d418830b06ade0c.1673960981.git.leon@kernel.org
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>