linux-stable.git/include/linux/mlx5/port.h, branch linux-5.0.y Linux kernel stable tree net/mlx5: Device events, Use async events chain 2018-11-26T21:39:34+00:00 Saeed Mahameed saeedm@mellanox.com 2018-11-20T22:12:27+00:00 69c1280b1f3b9123bc5154b2062507abcc14c3ef Move all the generic async events handling into new specific events handling file events.c to keep eq.c file clean from concrete event logic handling. Use new API to register for NOTIFY_ANY to handle generic events and dispatch allowed events to mlx5_core consumers (mlx5_ib and mlx5e) Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Move all the generic async events handling into new specific events
handling file events.c to keep eq.c file clean from concrete event logic
handling.

Use new API to register for NOTIFY_ANY to handle generic events and
dispatch allowed events to mlx5_core consumers (mlx5_ib and mlx5e)

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: PFC stall prevention support 2018-03-26T20:46:46+00:00 Inbar Karmy inbark@mellanox.com 2017-11-20T16:06:20+00:00 2afa609f5c970185a8cae73f6a4caadf97fbea54 Implement set/get functions to configure PFC stall prevention timeout by tunables api through ethtool. By default the stall prevention timeout is configured to 8 sec. Timeout range is: 80-8000 msec. Enabling stall prevention with the auto timeout will set the timeout to 100 msec. Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Implement set/get functions to configure PFC stall prevention
timeout by tunables api through ethtool.
By default the stall prevention timeout is configured to 8 sec.
Timeout range is: 80-8000 msec.

Enabling stall prevention with the auto timeout will set
the timeout to 100 msec.

Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5: QPTS and QPDPM register firmware command support 2017-11-05T04:26:21+00:00 Huy Nguyen huyn@mellanox.com 2017-07-18T21:08:46+00:00 415a64aa8dc6b4fc478609c549ca652d95a12f13 The QPTS register allows changing the priority trust state between pcp and dscp. Add support to get/set trust state from device. When the port is in pcp/dscp trust state, packet is routed by hardware to matching priority based on its pcp/dscp value respectively. The QPDPM register allow channing the dscp to priority mapping. Add support to get/set dscp to priority mapping from device. Note that to change a dscp mapping, the "e" bit of this dscp structure must be set in the QPDPM firmware command. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
The QPTS register allows changing the priority trust state between pcp and
dscp. Add support to get/set trust state from device. When the port is
in pcp/dscp trust state, packet is routed by hardware to matching priority
based on its pcp/dscp value respectively.

The QPDPM register allow channing the dscp to priority mapping. Add support
to get/set dscp to priority mapping from device.
Note that to change a dscp mapping, the "e" bit of this dscp structure
must be set in the QPDPM firmware command.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: DCBNL, Implement tc with ets type and zero bandwidth 2017-10-26T07:47:27+00:00 Huy Nguyen huyn@mellanox.com 2017-09-28T20:33:50+00:00 be0f161ef141e4df368aa3f417a1c2ab9c362e75 Previously, tc with ets type and zero bandwidth is not accepted by driver. This behavior does not follow the IEEE802.1qaz spec. If there are tcs with ets type and zero bandwidth, these tcs are assigned to the lowest priority tc_group #0. We equally distribute 100% bw of the tc_group #0 to these zero bandwidth ets tcs. Also, the non zero bandwidth ets tcs are assigned to tc_group #1. If there is no zero bandwidth ets tc, the non zero bandwidth ets tcs are assigned to tc_group #0. Fixes: cdcf11212b22 ("net/mlx5e: Validate BW weight values of ETS") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Previously, tc with ets type and zero bandwidth is not accepted
by driver. This behavior does not follow the IEEE802.1qaz spec.

If there are tcs with ets type and zero bandwidth, these tcs are
assigned to the lowest priority tc_group #0. We equally distribute
100% bw of the tc_group #0 to these zero bandwidth ets tcs.
Also, the non zero bandwidth ets tcs are assigned to tc_group #1.

If there is no zero bandwidth ets tc, the non zero bandwidth ets tcs
are assigned to tc_group #0.

Fixes: cdcf11212b22 ("net/mlx5e: Validate BW weight values of ETS")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5e: Add support for reading connector type from PTYS 2017-06-08T11:12:00+00:00 Eran Ben Elisha eranbe@mellanox.com 2017-02-13T12:00:59+00:00 5b4793f817452e478442684e6bba85bddb5a9345 Read port connector type from the firmware instead of caching it in the driver metadata. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Read port connector type from the firmware instead of caching it in the
driver metadata.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
net/mlx5: Add DCBX firmware commands support 2016-11-28T20:09:35+00:00 Huy Nguyen huyn@mellanox.com 2016-11-27T15:02:06+00:00 341c5ee2fb78420ffc441df36f93226be8069b0a Add set/query commands for DCBX_PARAM register Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add set/query commands for DCBX_PARAM register

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5e: Support DCBX CEE API 2016-11-28T20:09:34+00:00 Huy Nguyen huyn@mellanox.com 2016-11-27T15:02:04+00:00 3a6a931dfb8e49a7377825b465d84e110fe89f68 Add DCBX CEE API interface for ConnectX-4. Configurations are stored in a temporary structure and are applied to the card's firmware when the CEE's setall callback function is called. Note: priority group in CEE is equivalent to traffic class in ConnectX-4 hardware spec. bw allocation per priority in CEE is not supported because ConnectX-4 only supports bw allocation per traffic class. user priority in CEE does not have an equivalent term in ConnectX-4. Therefore, user priority to priority mapping in CEE is not supported. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add DCBX CEE API interface for ConnectX-4. Configurations are stored in
a temporary structure and are applied to the card's firmware when
the CEE's setall callback function is called.

Note:
  priority group in CEE is equivalent to traffic class in ConnectX-4
  hardware spec.

  bw allocation per priority in CEE is not supported because ConnectX-4
  only supports bw allocation per traffic class.

  user priority in CEE does not have an equivalent term in ConnectX-4.
  Therefore, user priority to priority mapping in CEE is not supported.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Port module event hardware structures 2016-11-18T17:08:57+00:00 Huy Nguyen huyn@mellanox.com 2016-11-17T11:45:56+00:00 4ce3bf2fa8ba309b5ca19539fcc8671a0fc084f9 Add hardware structures and constants definitions needed for module events support. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Add hardware structures and constants definitions needed for module
events support.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5: Separate query_port_proto_oper for IB and EN 2016-08-18T15:49:52+00:00 Noa Osherovich noaos@mellanox.com 2016-06-02T07:47:53+00:00 d5beb7f2aff4a60237fd97a98d49a78c9045b8f2 Replaced mlx5_query_port_proto_oper with separate functions per link type. The functions should take different arguments so no point in trying to unite them. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> 
Replaced mlx5_query_port_proto_oper with separate functions per link
type. The functions should take different arguments so no point in
trying to unite them.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
net/mlx5: Expose mlx5e_link_mode 2016-08-18T15:49:52+00:00 Noa Osherovich noaos@mellanox.com 2016-06-26T09:43:24+00:00 8cca30a7f914fe363fa9700715619ca5c8cb38cc The mlx5e_link_mode enumeration will also be used in mlx5_ib for RoCE. This patch moves the enumeration to the mlx5 driver port header file. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> 
The mlx5e_link_mode enumeration will also be used in mlx5_ib for RoCE.
This patch moves the enumeration to the mlx5 driver port header file.

Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>