linux-stable.git/include/linux/mlx5/fs.h, branch linux-4.9.y

net/mlx5: Add sniffer namespaces

2016-08-18T15:49:59+00:00

Add sniffer TX and RX namespaces to receive ingoing and outgoing
traffic.

Each outgoing/incoming packet is duplicated and steered to the sniffer
TX/RX namespace in addition to the regular flow.

Signed-off-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Leon Romanovsky

net/mlx5: Add LAG flow steering namespace

2016-08-18T15:49:57+00:00

This namespace is used for LAG demux flowtable.

The idea is to position the LAG demux ft between
bypass and kernel flowtables, allowing raw-eth
traffic from both ports to be received by the PF0
IB device.

Signed-off-by: Aviv Heller 
Reviewed-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Leon Romanovsky

net/mlx5: LAG demux flow table support

2016-08-18T15:49:56+00:00

Add interfaces to allow the creation and destruction of a
LAG demux flow table.

It is a special flow table used during LAG for redirecting
non user-mode packets from PF0 to PF1 root ft, if a packet was
received on phys port two.

Signed-off-by: Aviv Heller 
Reviewed-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: Leon Romanovsky

net/mlx5e: Add ethtool flow steering support

2016-07-05T07:06:02+00:00

Implement etrhtool set_rxnfc callback to support ethtool flow spec
direct steering. This patch adds only the support of ether flow type
spec. L3/L4 flow specs support will be added in downstream patches.

Signed-off-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: David S. Miller

net/mlx5: Refactor mlx5_add_flow_rule

2016-07-05T07:06:02+00:00

Reduce the set of arguments passed to mlx5_add_flow_rule
by introducing flow_spec structure.

Signed-off-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: David S. Miller

net/mlx5: Introduce offloads steering namespace

2016-07-02T18:40:39+00:00

Add a new namespace (MLX5_FLOW_NAMESPACE_OFFLOADS) to be populated
with flow steering rules that deal with rules that have have to
be executed before the EN NIC steering rules are matched.

The namespace is located after the bypass name-space and before the
kernel name-space. Therefore, it precedes the HW processing done for
rules set for the kernel NIC name-space.

Under SRIOV, it would allow us to match on e-switch missed packet
and forward them to the relevant VF representor TIR.

Signed-off-by: Or Gerlitz 
Signed-off-by: Amir Vadai 
Signed-off-by: Saeed Mahameed 
Signed-off-by: David S. Miller

net/mlx5_core: Flow counters infrastructure

2016-05-16T17:43:51+00:00

If a counter has the aging flag set when created, it is added to a list
of counters that will be queried periodically from a workqueue.  query
result and last use timestamp are cached.
add/del counter must be very efficient since thousands of such
operations might be issued in a second.
There is only a single reference to counters without aging, therefore
no need for locks.
But, counters with aging enabled are stored in a list. In order to make
code as lockless as possible, all the list manipulation and access to
hardware is done from a single context - the periodic counters query
thread.

The hardware supports multiple counters per FTE, however currently we
are using one counter for each FTE.

Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

net/mlx5_core: Introduce flow steering destination of type counter

2016-05-16T17:43:51+00:00

When adding a flow steering rule with a counter, need to supply a
destination of type MLX5_FLOW_DESTINATION_TYPE_COUNTER, with a pointer
to a struct mlx5_fc.
Also, MLX5_FLOW_CONTEXT_ACTION_COUNT bit should be set in the action.

Signed-off-by: Amir Vadai 
Signed-off-by: David S. Miller

net/mlx5: Flow steering, Add vport ACL support

2016-05-04T18:04:46+00:00

Update the relevant flow steering device structs and commands to
support vport.
Update the flow steering core API to receive vport number.
Add ingress and egress ACL flow table name spaces.
Add ACL flow table support:
* ACL (Access Control List) flow table is a table that contains
only allow/drop steering rules.

* We have two types of ACL flow tables - ingress and egress.

* ACLs handle traffic sent from/to E-Switch FDB table, Ingress refers to
traffic sent from Vport to E-Switch and Egress refers to traffic sent
from E-Switch to vport.

* Ingress ACL flow table allow/drop rules is checked against traffic
sent from VF.

* Egress ACL flow table allow/drop rules is checked against traffic sent
to VF.

Signed-off-by: Mohamad Haj Yahia 
Signed-off-by: Saeed Mahameed 
Signed-off-by: David S. Miller

net/mlx5: Add user chosen levels when allocating flow tables

2016-04-29T20:29:09+00:00

Currently, consumers of the flow steering infrastructure can't
choose their own flow table levels and are limited to one
flow table per level. This just waste levels.
Instead, we introduce here the possibility to use multiple
flow tables in a level. The user is free to connect these
flow tables, while following the rule (FTEs in FT of level x
could only point to FTs of level y where y > x).

In addition this patch switch the order of the create/destroy
flow tables of the NIC(vlan and main).

Signed-off-by: Maor Gottlieb 
Signed-off-by: Saeed Mahameed 
Signed-off-by: David S. Miller