The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.

  - mmu_notifier_seq/range_start/range_end are renamed to
    mmu_invalidate_seq/range_start/range_end.

  - mmu_notifier_retry{_hva} helper functions are renamed to
    mmu_invalidate_retry{_hva}.

  - mmu_notifier_count is renamed to mmu_invalidate_in_progress to
    avoid confusion with mn_active_invalidate_count.

  - While here, also update kvm_inc/dec_notifier_count() to
    kvm_mmu_invalidate_begin/end() to match the change for
    mmu_notifier_count.

No functional change intended.

Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM_INTERNAL_MEM_SLOTS better reflects the fact those slots are KVM
internally used (invisible to userspace) and avoids confusion to future
private slots that can have different meaning.

Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-2-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM/s390, KVM/x86 and common infrastructure changes for 5.20

x86:

* Permit guests to ignore single-bit ECC errors

* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache

* Intel IPI virtualization

* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS

* PEBS virtualization

* Simplify PMU emulation by just using PERF_TYPE_RAW events

* More accurate event reinjection on SVM (avoid retrying instructions)

* Allow getting/setting the state of the speaker port data bit

* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent

* "Notify" VM exit (detect microarchitectural hangs) for Intel

* Cleanups for MCE MSR emulation

s390:

* add an interface to provide a hypervisor dump for secure guests

* improve selftests to use TAP interface

* enable interpretive execution of zPCI instructions (for PCI passthrough)

* First part of deferred teardown

* CPU Topology

* PV attestation

* Minor fixes

Generic:

* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple

x86:

* Use try_cmpxchg64 instead of cmpxchg64

* Bugfixes

* Ignore benign host accesses to PMU MSRs when PMU is disabled

* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior

* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis

* Port eager page splitting to shadow MMU as well

* Enable CMCI capability by default and handle injected UCNA errors

* Expose pid of vcpu threads in debugfs

* x2AVIC support for AMD

* cleanup PIO emulation

* Fixes for LLDT/LTR emulation

* Don't require refcounted "struct page" to create huge SPTEs

x86 cleanups:

* Use separate namespaces for guest PTEs and shadow PTEs bitmasks

* PIO emulation

* Reorganize rmap API, mostly around rmap destruction

* Do not workaround very old KVM bugs for L0 that runs with nesting enabled

* new selftests API for CPUID

Some of the statistics values exported by KVM are always only 0 or 1.
It can be useful to export this fact to userspace so that it can track
them specially (for example by polling the value every now and then to
compute a % of time spent in a specific state).

Therefore, add "boolean value" as a new "unit".  While it is not exactly
a unit, it walks and quacks like one.  In particular, using the type
would be wrong because boolean values could be instantaneous or peak
values (e.g. "is the rmap allocated?") or even two-bucket histograms
(e.g. "number of posted vs. non-posted interrupt injections").

Suggested-by: Amneesh Singh <natto@weirdnatto.in>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Read vcpu->vcpu_idx directly instead of bouncing through the one-line
wrapper, kvm_vcpu_get_idx(), and drop the wrapper.  The wrapper is a
remnant of the original implementation and serves no purpose; remove it
(again) before it gains more users.

kvm_vcpu_get_idx() was removed in the not-too-distant past by commit
4eeef2424153 ("KVM: x86: Query vcpu->vcpu_idx directly and drop its
accessor"), but was unintentionally re-introduced by commit a54d806688fe
("KVM: Keep memslots in tree-based structures instead of array-based ones"),
likely due to a rebase goof.  The wrapper then managed to gain users in
KVM's Xen code.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20220614225615.3843835-1-seanjc@google.com

The recent mmio_stale_data fixes broke the noinstr constraints:

  vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x15b: call to wrmsrl.constprop.0() leaves .noinstr.text section
  vmlinux.o: warning: objtool: vmx_vcpu_enter_exit+0x1bf: call to kvm_arch_has_assigned_device() leaves .noinstr.text section

make it all happy again.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>

Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.

Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Allow the capacity of the kvm_mmu_memory_cache struct to be chosen at
declaration time rather than being fixed for all declarations. This will
be used in a follow-up commit to declare an cache in x86 with a capacity
of 512+ objects without having to increase the capacity of all caches in
KVM.

This change requires each cache now specify its capacity at runtime,
since the cache struct itself no longer has a fixed capacity known at
compile time. To protect against someone accidentally defining a
kvm_mmu_memory_cache struct directly (without the extra storage), this
commit includes a WARN_ON() in kvm_mmu_topup_memory_cache().

In order to support different capacities, this commit changes the
objects pointer array to be dynamically allocated the first time the
cache is topped-up.

While here, opportunistically clean up the stack-allocated
kvm_mmu_memory_cache structs in riscv and arm64 to use designated
initializers.

No functional change intended.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220516232138.1783324-22-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rename and refactor kvm_is_reserved_pfn() to kvm_pfn_to_refcounted_page()
to better reflect what KVM is actually checking, and to eliminate extra
pfn_to_page() lookups.  The kvm_release_pfn_*() an kvm_try_get_pfn()
helpers in particular benefit from "refouncted" nomenclature, as it's not
all that obvious why KVM needs to get/put refcounts for some PG_reserved
pages (ZERO_PAGE and ZONE_DEVICE).

Add a comment to call out that the list of exceptions to PG_reserved is
all but guaranteed to be incomplete.  The list has mostly been compiled
by people throwing noodles at KVM and finding out they stick a little too
well, e.g. the ZERO_PAGE's refcount overflowed and ZONE_DEVICE pages
didn't get freed.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Operate on a 'struct page' instead of a pfn when checking if a page is a
ZONE_DEVICE page, and rename the helper accordingly.  Generally speaking,
KVM doesn't actually care about ZONE_DEVICE memory, i.e. shouldn't do
anything special for ZONE_DEVICE memory.  Rather, KVM wants to treat
ZONE_DEVICE memory like regular memory, and the need to identify
ZONE_DEVICE memory only arises as an exception to PG_reserved pages. In
other words, KVM should only ever check for ZONE_DEVICE memory after KVM
has already verified that there is a struct page associated with the pfn.

No functional change intended.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220429010416.2788472-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>