linux-stable.git/include/linux/irqchip, branch v4.0

irqchip: gicv3-its: Use non-cacheable accesses when no shareability

2015-03-29T19:25:57+00:00

If the ITS or the redistributors report their shareability as zero,
then it is important to make sure they will no generate any cacheable
traffic, as this is unlikely to produce the expected result.

Signed-off-by: Marc Zyngier 
Link: https://lkml.kernel.org/r/1427465705-17126-5-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper

irqchip: gicv3-its: Fix PROP/PEND and BASE/CBASE confusion

2015-03-29T19:25:51+00:00

The ITS driver sometime mixes up the use of GICR_PROPBASE bitfields
for the GICR_PENDBASE register, and GITS_BASER for GICR_CBASE.

This does not lead to any observable bug because similar bits are
at the same location, but this just make the code even harder to
understand...

This patch provides the required #defines and fixes the mixup.

Signed-off-by: Marc Zyngier 
Link: https://lkml.kernel.org/r/1427465705-17126-4-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper

irqchip: gicv3-its: Define macros for GITS_CTLR fields

2015-03-08T05:34:35+00:00

Define macros for GITS_CTLR fields to avoid using magic numbers.

Acked-by: Marc Zyngier 
Signed-off-by: Yun Wu 
Signed-off-by: Marc Zyngier 
Link: https://lkml.kernel.org/r/1425659870-11832-11-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper

irqchip: gicv3-its: Allocate enough memory for the full range of DeviceID

2015-03-08T05:32:52+00:00

The ITS table allocator is only allocating a single page per table.
This works fine for most things, but leads to silent lack of
interrupt delivery if we end-up with a device that has an ID that is
out of the range defined by a single page of memory. Even worse, depending
on the page size, behaviour changes, which is not a very good experience.

A solution is actually to allocate memory for the full range of ID that
the ITS supports. A massive waste memory wise, but at least a safe bet.

Tested on a Phytium SoC.

Tested-by: Chen Baozi 
Acked-by: Chen Baozi 
Signed-off-by: Marc Zyngier 
Link: https://lkml.kernel.org/r/1425659870-11832-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2015-02-22T03:41:38+00:00

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS:

   - a number of fixes that didn't make the 3.19 release.

   - a number of cleanups.

   - preliminary support for Cavium's Octeon 3 SOCs which feature up to
     48 MIPS64 R3 cores with FPU and hardware virtualization.

   - support for MIPS R6 processors.

     Revision 6 of the MIPS architecture is a major revision of the MIPS
     architecture which does away with many of original sins of the
     architecture such as branch delay slots.  This and other changes in
     R6 require major changes throughout the entire MIPS core
     architecture code and make up for the lion share of this pull
     request.

   - finally some preparatory work for eXtendend Physical Address
     support, which allows support of up to 40 bit of physical address
     space on 32 bit processors"

     [ Ahh, MIPS can't leave the PAE brain damage alone.  It's like
       every CPU architect has to make that mistake, but pee in the snow
       by changing the TLA.  But whether it's called PAE, LPAE or XPA,
       it's horrid crud   - Linus ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits)
  MIPS: sead3: Corrected get_c0_perfcount_int
  MIPS: mm: Remove dead macro definitions
  MIPS: OCTEON: irq: add CIB and other fixes
  MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.
  MIPS: OCTEON: More OCTEONIII support
  MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
  MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
  MIPS: OCTEON: Update octeon-model.h code for new SoCs.
  MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
  MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
  MIPS: OCTEON: Implement the core-16057 workaround
  MIPS: OCTEON: Delete unused COP2 saving code
  MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register
  MIPS: OCTEON: Save and restore CP2 SHA3 state
  MIPS: OCTEON: Fix FP context save.
  MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
  MIPS: boot: Provide more uImage options
  MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
  MIPS: ip22-gio: Remove legacy suspend/resume support
  mips: pci: Add ifdef around pci_proc_domain
  ...

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-02-16T23:20:40+00:00

Pull irqchip updates from Ingo Molnar:
 "Various irqchip driver updates, plus a genirq core update that allows
  the initial spreading of irqs amonst CPUs without having to do it from
  user-space"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix null pointer reference in irq_set_affinity_hint()
  irqchip: gic: Allow interrupt level to be set for PPIs
  irqchip: mips-gic: Handle pending interrupts once in __gic_irq_dispatch()
  irqchip: Conexant CX92755 interrupts controller driver
  irqchip: Devicetree: document Conexant Digicolor irq binding
  irqchip: omap-intc: Remove unused legacy interface for omap2
  irqchip: omap-intc: Fix support for dm814 and dm816
  irqchip: mtk-sysirq: Get irq number from register resource size
  irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support
  genirq: Set initial affinity in irq_set_affinity_hint()

MIPS: cevt-r4k: Drop GIC special case

2015-02-05T13:56:53+00:00

The cevt-r4k driver used to call into the GIC driver to find whether the
timer was pending, but only with External Interrupt Controller (EIC)
mode, where the Cause.IP bits can't be used as they encode the interrupt
priority level (Cause.RIPL) instead.

However commit e9de688dac65 ("irqchip: mips-gic: Support local
interrupts") changed the condition from cpu_has_veic to gic_present.
This fails on cores such as P5600 which have a GIC but the local
interrupts aren't routable by the GIC, causing c0_compare_int_usable()
to consider the interrupt unusable so r4k_clockevent_init() fails.

The previous behaviour, added in commit 98b67c37db33 ("MIPS: Add EIC
support for GIC."), wasn't really correct either as far as I can tell,
since P5600 apparently supports EIC mode too, and in any case the use of
Cause.TI with r2 should have been sufficient anyway since commit
010c108d7af7 ("MIPS: PowerTV: Fix support for timer interrupts with > 64
external IRQs").

Therefore drop the call into the gic driver altogether, and add a
comment in c0_compare_int_pending() to clarify that Cause.TI does get
checked since MIPS r2.

Signed-off-by: James Hogan 
Fixes: e9de688dac65 ("irqchip: mips-gic: Support local interrupts")
Reviewed-by: Andrew Bresticker 
Cc: Ralf Baechle 
Cc: Steven J. Hill 
Cc: Qais Yousef 
Cc: Jason Cooper 
Cc: Thomas Gleixner 
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/9077/
Signed-off-by: Ralf Baechle

irqchip: omap-intc: Remove unused legacy interface for omap2

2015-01-26T10:38:23+00:00

Nowadays omap2 is booting in device tree only mode so there is no
need to keep the legacy interface around for omap2_init_irq().

Signed-off-by: Tony Lindgren 
Reviewed-by: Felipe Balbi 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/1421187806-6804-3-git-send-email-tony@atomide.com
Signed-off-by: Thomas Gleixner

irqchip: omap-intc: Fix support for dm814 and dm816

2015-01-26T10:38:23+00:00

On dm81xx we have 128 interrupts like am33xx has. Let's add
compatible flags for dm814x and dm816x, and document the
existing binding.

As the dm81xx are booting in device tree only mode, we can now
also remove ti81xx_init_irq() legacy function.

Signed-off-by: Tony Lindgren 
Reviewed-by: Felipe Balbi 
Cc: Brian Hutchinson 
Cc: Jason Cooper 
Link: http://lkml.kernel.org/r/1421187806-6804-2-git-send-email-tony@atomide.com
Signed-off-by: Thomas Gleixner

arm64: GICv3: introduce symbolic names for GICv3 ICC_SGI1R_EL1 fields

2015-01-20T17:25:31+00:00

The gic_send_sgi() function used hardcoded bit shift values to
generate the ICC_SGI1R_EL1 register value.
Replace this with symbolic names to allow reusing them later.

Signed-off-by: Andre Przywara 
Reviewed-by: Christoffer Dall 
Signed-off-by: Christoffer Dall