linux-stable.git/include/linux/intel-iommu.h, branch v5.7.7

iommu/vt-d: Set U/S bit in first level page table by default

2020-06-30T19:36:07+00:00

[ Upstream commit 16ecf10e815d70d11d2300243f4a3b4c7c5acac7 ]

When using first-level translation for IOVA, currently the U/S bit in the
page table is cleared which implies DMA requests with user privilege are
blocked. As the result, following error messages might be observed when
passing through a device to user level:

DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Read] Request device [41:00.0] PASID 1 fault addr 7ecdcd000
        [fault reason 129] SM: U/S set 0 for first-level translation
        with user privilege

This fixes it by setting U/S bit in the first level page table and makes
IOVA over first level compatible with previous second-level translation.

Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level")
Reported-by: Xin Zeng 
Signed-off-by: Lu Baolu 
Link: https://lore.kernel.org/r/20200622231345.29722-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel 
Signed-off-by: Sasha Levin

iommu/vt-d: Allocate domain info for real DMA sub-devices

2020-06-22T07:33:03+00:00

commit 4fda230ecddc2573ed88632e98b69b0b9b68c0ad upstream.

Sub-devices of a real DMA device might exist on a separate segment than
the real DMA device and its IOMMU. These devices should still have a
valid device_domain_info, but the current dma alias model won't
allocate info for the subdevice.

This patch adds a segment member to struct device_domain_info and uses
the sub-device's BDF so that these sub-devices won't alias to other
devices.

Fixes: 2b0140c69637e ("iommu/vt-d: Use pci_real_dma_dev() for mapping")
Cc: stable@vger.kernel.org # v5.6+
Signed-off-by: Jon Derrick 
Acked-by: Lu Baolu 
Link: https://lore.kernel.org/r/20200527165617.297470-3-jonathan.derrick@intel.com
Signed-off-by: Joerg Roedel 
Signed-off-by: Greg Kroah-Hartman

iommu/vt-d: Fix debugfs register reads

2020-03-13T13:25:46+00:00

Commit 6825d3ea6cde ("iommu/vt-d: Add debugfs support to show register
contents") dumps the register contents for all IOMMU devices.

Currently, a 64 bit read(dmar_readq) is done for all the IOMMU registers,
even though some of the registers are 32 bits, which is incorrect.

Use the correct read function variant (dmar_readl/dmar_readq) while
reading the contents of 32/64 bit registers respectively.

Signed-off-by: Megha Dey 
Link: https://lore.kernel.org/r/1583784587-26126-2-git-send-email-megha.dey@linux.intel.com
Acked-by: Lu Baolu 
Signed-off-by: Joerg Roedel

iommu/vt-d: debugfs: Add support to show page table internals

2020-01-07T13:05:58+00:00

Export page table internals of the domain attached to each device.
Example of such dump on a Skylake machine:

$ sudo cat /sys/kernel/debug/iommu/intel/domain_translation_struct
[ ... ]
Device 0000:00:14.0 with pasid 0 @0x15f3d9000
IOVA_PFN                PML5E                   PML4E
0x000000008ced0 |       0x0000000000000000      0x000000015f3da003
0x000000008ced1 |       0x0000000000000000      0x000000015f3da003
0x000000008ced2 |       0x0000000000000000      0x000000015f3da003
0x000000008ced3 |       0x0000000000000000      0x000000015f3da003
0x000000008ced4 |       0x0000000000000000      0x000000015f3da003
0x000000008ced5 |       0x0000000000000000      0x000000015f3da003
0x000000008ced6 |       0x0000000000000000      0x000000015f3da003
0x000000008ced7 |       0x0000000000000000      0x000000015f3da003
0x000000008ced8 |       0x0000000000000000      0x000000015f3da003
0x000000008ced9 |       0x0000000000000000      0x000000015f3da003

PDPE                    PDE                     PTE
0x000000015f3db003      0x000000015f3dc003      0x000000008ced0003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced1003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced2003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced3003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced4003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced5003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced6003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced7003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced8003
0x000000015f3db003      0x000000015f3dc003      0x000000008ced9003
[ ... ]

Signed-off-by: Lu Baolu 
Signed-off-by: Joerg Roedel

iommu/vt-d: Flush PASID-based iotlb for iova over first level

2020-01-07T13:05:58+00:00

When software has changed first-level tables, it should invalidate
the affected IOTLB and the paging-structure-caches using the PASID-
based-IOTLB Invalidate Descriptor defined in spec 6.5.2.4.

Signed-off-by: Lu Baolu 
Signed-off-by: Joerg Roedel

iommu/vt-d: Setup pasid entries for iova over first level

2020-01-07T13:05:58+00:00

Intel VT-d in scalable mode supports two types of page tables for
IOVA translation: first level and second level. The IOMMU driver
can choose one from both for IOVA translation according to the use
case. This sets up the pasid entry if a domain is selected to use
the first-level page table for iova translation.

Signed-off-by: Lu Baolu 
Signed-off-by: Joerg Roedel

iommu/vt-d: Fix CPU and IOMMU SVM feature matching checks

2020-01-07T13:05:57+00:00

Shared Virtual Memory(SVM) is based on a collective set of hardware
features detected at runtime. There are requirements for matching CPU
and IOMMU capabilities.

The current code checks CPU and IOMMU feature set for SVM support but
the result is never stored nor used. Therefore, SVM can still be used
even when these checks failed. The consequences can be:
1. CPU uses 5-level paging mode for virtual address of 57 bits, but
IOMMU can only support 4-level paging mode with 48 bits address for DMA.
2. 1GB page size is used by CPU but IOMMU does not support it. VT-d
unrecoverable faults may be generated.

The best solution to fix these problems is to prevent them in the first
place.

This patch consolidates code for checking PASID, CPU vs. IOMMU paging
mode compatibility, as well as provides specific error messages for
each failed checks. On sane hardware configurations, these error message
shall never appear in kernel log.

Signed-off-by: Jacob Pan 
Reviewed-by: Eric Auger 
Signed-off-by: Lu Baolu 
Signed-off-by: Joerg Roedel

iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros

2019-11-11T15:10:54+00:00

For both PASID-based-Device-TLB Invalidate Descriptor and
Device-TLB Invalidate Descriptor, the Physical Function Source-ID
value is split according to this layout:

PFSID[3:0] is set at offset 12 and PFSID[15:4] is put at offset 52.
Fix the part laid out at offset 52.

Fixes: 0f725561e1684 ("iommu/vt-d: Add definitions for PFSID")
Signed-off-by: Eric Auger 
Acked-by: Jacob Pan 
Cc: stable@vger.kernel.org # v4.19+
Acked-by: Lu Baolu 
Signed-off-by: Joerg Roedel

Merge branches 'arm/omap', 'arm/exynos', 'arm/smmu', 'arm/mediatek', 'arm/qcom', 'arm/renesas', 'x86/amd', 'x86/vt-d' and 'core' into next

2019-09-11T10:39:19+00:00

iommu/vt-d: Add Scalable Mode fault information

2019-09-11T10:36:53+00:00

Intel VT-d specification revision 3 added support for Scalable Mode
Translation for DMA remapping. Add the Scalable Mode fault reasons to
show detailed fault reasons when the translation fault happens.

Link: https://software.intel.com/sites/default/files/managed/c5/15/vt-directed-io-spec.pdf

Reviewed-by: Sohil Mehta 
Signed-off-by: Kyung Min Park 
Signed-off-by: Joerg Roedel