Pull livepatching fixes from Jiri Kosina:

 - regression (from 4.4) fix for ordering issue, introduced by an
   earlier ftrace change, that broke live patching of modules.

   The fix replaces the ftrace module notifier by direct call in order
   to make the ordering guaranteed and well-defined.  The patch, from
   Jessica Yu, has been acked both by Steven and Rusty

 - error message fix from Miroslav Benes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  ftrace/module: remove ftrace module notifier
  livepatch: change the error message in asm/livepatch.h header files

Remove the ftrace module notifier in favor of directly calling
ftrace_module_enable() and ftrace_release_mod() in the module loader.
Hard-coding the function calls directly in the module loader removes
dependence on the module notifier call chain and provides better
visibility and control over what gets called when, which is important
to kernel utilities such as livepatch.

This fixes a notifier ordering issue in which the ftrace module notifier
(and hence ftrace_module_enable()) for coming modules was being called
after klp_module_notify(), which caused livepatch modules to initialize
incorrectly. This patch removes dependence on the module notifier call
chain in favor of hard coding the corresponding function calls in the
module loader. This ensures that ftrace and livepatch code get called in
the correct order on patch module load and unload.

Fixes: 5156dca34a3e ("ftrace: Fix the race between ftrace and insmod")
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull minor tracing fixes from Steven Rostedt:
 "This includes three minor fixes, mostly due to cut-and-paste issues.

  The first is a cut and paste issue that changed the amount of stack to
  skip when tracing a stack dump from 0 to 6, which basically made the
  stack disappear for small stack traces.

  The second fix is just removing an unused field in a struct that is no
  longer used, and currently just wastes space.

  The third is another cut-and-paste fix that had a tracepoint recording
  the wrong field (it was recording the previous field a second time)"

* tag 'trace-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/dma-buf/fence: Fix timeline str value on fence_annotate_wait_on
  ftrace: Remove unused nr_trampolines var
  tracing: Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()

It's not needed & not used since introducing old_hash: commit fef5aeeee9e371
("ftrace: Replace tramp_hash with old_*_hash to save space").

Link: http://lkml.kernel.org/r/1452699598-27610-1-git-send-email-0x7f454c46@gmail.com

Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull tracing updates from Steven Rostedt:
 "Not much new with tracing for this release.  Mostly just clean ups and
  minor fixes.

  Here's what else is new:

   - A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
     those that want both.

   - New selftest to test the instance create and delete

   - Better debug output when ftrace fails"

* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
  ftrace: Fix the race between ftrace and insmod
  ftrace: Add infrastructure for delayed enabling of module functions
  x86: ftrace: Fix the comments for ftrace_modify_code_direct()
  tracing: Fix comment to use tracing_on over tracing_enable
  metag: ftrace: Fix the comments for ftrace_modify_code
  sh: ftrace: Fix the comments for ftrace_modify_code()
  ia64: ftrace: Fix the comments for ftrace_modify_code()
  ftrace: Clean up ftrace_module_init() code
  ftrace: Join functions ftrace_module_init() and ftrace_init_module()
  tracing: Introduce TRACE_EVENT_FN_COND macro
  tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
  bpf: Constify bpf_verifier_ops structure
  ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
  ftrace: Remove use of control list and ops
  ftrace: Fix output of enabled_functions for showing tramp
  ftrace: Fix a typo in comment
  ftrace: Show all tramps registered to a record on ftrace_bug()
  ftrace: Add variable ftrace_expected for archs to show expected code
  ftrace: Add new type to distinguish what kind of ftrace_bug()
  tracing: Update cond flag when enabling or disabling a trigger
  ...

Qiu Peiyang pointed out that there's a race when enabling function tracing
and loading a module. In order to make the modifications of converting nops
in the prologue of functions into callbacks, the text needs to be converted
from read-only to read-write. When enabling function tracing, the text
permission is updated, the functions are modified, and then they are put
back.

When loading a module, the updates to convert function calls to mcount is
done before the module text is set to read-only. But after it is done, the
module text is visible by the function tracer. Thus we have the following
race:

	CPU 0			CPU 1
	-----			-----
   start function tracing
   set text to read-write
			     load_module
			     add functions to ftrace
			     set module text read-only

   update all functions to callbacks
   modify module functions too
   < Can't it's read-only >

When this happens, ftrace detects the issue and disables itself till the
next reboot.

To fix this, a new DISABLED flag is added for ftrace records, which all
module functions get when they are added. Then later, after the module code
is all set, the records will have the DISABLED flag cleared, and they will
be enabled if any callback wants all functions to be traced.

Note, this doesn't add the delay to later. It simply changes the
ftrace_module_init() to do both the setting of DISABLED records, and then
immediately calls the enable code. This helps with testing this new code as
it has the same behavior as previously. Another change will come after this
to have the ftrace_module_enable() called after the text is set to
read-only.

Cc: Qiu Peiyang <peiyangx.qiu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

If the module init code fails after calling ftrace_module_init() and before
calling do_init_module(), we can suffer from a memory leak. This is because
ftrace_module_init() allocates pages to store the locations that ftrace
hooks are placed in the module text. If do_init_module() fails, it still
calls the MODULE_GOING notifiers which will tell ftrace to do a clean up of
the pages it allocated for the module. But if load_module() fails before
then, the pages allocated by ftrace_module_init() will never be freed.

Call ftrace_release_mod() on the module if load_module() fails before
getting to do_init_module().

Link: http://lkml.kernel.org/r/567CEA31.1070507@intel.com

Reported-by: "Qiu, PeiyangX" <peiyangx.qiu@intel.com>
Fixes: a949ae560a511 "ftrace/module: Hardcode ftrace_module_init() call into load_module()"
Cc: stable@vger.kernel.org # v2.6.38+
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Currently perf has its own list function within the ftrace infrastructure
that seems to be used only to allow for it to have per-cpu disabling as well
as a check to make sure that it's not called while RCU is not watching. It
uses something called the "control_ops" which is used to iterate over ops
under it with the control_list_func().

The problem is that this control_ops and control_list_func unnecessarily
complicates the code. By replacing FTRACE_OPS_FL_CONTROL with two new flags
(FTRACE_OPS_FL_RCU and FTRACE_OPS_FL_PER_CPU) we can remove all the code
that is special with the control ops and add the needed checks within the
generic ftrace_list_func().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

When an anomaly is found while modifying function code, ftrace_bug() is
called which disables the function tracing infrastructure and reports
information about what failed. If the code that is to be replaced does not
match what is expected, then actual code is shown. Currently there is no
arch generic way to show what was expected.

Add a new variable pointer calld ftrace_expected that the arch code can set
to point to what it expected so that ftrace_bug() can report the actual text
as well as the text that was expected to be there.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

The ftrace function hook utility has several internal checks to make sure
that whatever it modifies is exactly what it expects to be modifying. This
is essential as modifying running code can be extremely dangerous to the
system.

When an anomaly is detected, ftrace_bug() is called which sends a splat to
the console and disables function tracing. There's some extra information
that is printed to help diagnose the issue.

One thing that is missing though is output of what ftrace was doing at the
time of the crash. Was it updating a call site or perhaps converting a call
site to a nop? A new global enum variable is created to state what ftrace
was doing at the time of the anomaly, and this is reported in ftrace_bug().

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>