[ Upstream commit d7ba4cc900bf1eea2d8c807c6b1fc6bd61f41237 ]

This patch changes the return types of bpf_map_ops functions to long, where
previously int was returned. Using long allows for bpf programs to maintain
the sign bit in the absence of sign extension during situations where
inlined bpf helper funcs make calls to the bpf_map_ops funcs and a negative
error is returned.

The definitions of the helper funcs are generated from comments in the bpf
uapi header at `include/uapi/linux/bpf.h`. The return type of these
helpers was previously changed from int to long in commit bdb7b79b4ce8. For
any case where one of the map helpers call the bpf_map_ops funcs that are
still returning 32-bit int, a compiler might not include sign extension
instructions to properly convert the 32-bit negative value a 64-bit
negative value.

For example:
bpf assembly excerpt of an inlined helper calling a kernel function and
checking for a specific error:

; err = bpf_map_update_elem(&mymap, &key, &val, BPF_NOEXIST);
  ...
  46:	call   0xffffffffe103291c	; htab_map_update_elem
; if (err && err != -EEXIST) {
  4b:	cmp    $0xffffffffffffffef,%rax ; cmp -EEXIST,%rax

kernel function assembly excerpt of return value from
`htab_map_update_elem` returning 32-bit int:

movl $0xffffffef, %r9d
...
movl %r9d, %eax

...results in the comparison:
cmp $0xffffffffffffffef, $0x00000000ffffffef

Fixes: bdb7b79b4ce8 ("bpf: Switch most helper return values from 32-bit int to 64-bit long")
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20230322194754.185781-3-inwardvessel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:

 NMI backtrace for cpu 16
 CPU: 16 PID: 2574 Comm: htab.bin Tainted: G             L     6.1.0+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
 RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
 ......
 Call Trace:
  <TASK>
  copy_map_value_locked+0xb7/0x170
  bpf_map_copy_value+0x113/0x3c0
  __sys_bpf+0x1c67/0x2780
  __x64_sys_bpf+0x1c/0x20
  do_syscall_64+0x30/0x60
  entry_SYSCALL_64_after_hwframe+0x46/0xb0
 ......
  </TASK>

For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.

Fixes: 0fd7c5d43339 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch adds special BPF_RB_{ROOT,NODE} btf_field_types similar to
BPF_LIST_{HEAD,NODE}, adds the necessary plumbing to detect the new
types, and adds bpf_rb_root_free function for freeing bpf_rb_root in
map_values.

structs bpf_rb_root and bpf_rb_node are opaque types meant to
obscure structs rb_root_cached rb_node, respectively.

btf_struct_access will prevent BPF programs from touching these special
fields automatically now that they're recognized.

btf_check_and_fixup_fields now groups list_head and rb_root together as
"graph root" fields and {list,rb}_node as "graph node", and does same
ownership cycle checking as before. Note that this function does _not_
prevent ownership type mixups (e.g. rb_root owning list_node) - that's
handled by btf_parse_graph_root.

After this patch, a bpf program can have a struct bpf_rb_root in a
map_value, but not add anything to nor do anything useful with it.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230214004017.2534011-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This patch introduces non-owning reference semantics to the verifier,
specifically linked_list API kfunc handling. release_on_unlock logic for
refs is refactored - with small functional changes - to implement these
semantics, and bpf_list_push_{front,back} are migrated to use them.

When a list node is pushed to a list, the program still has a pointer to
the node:

  n = bpf_obj_new(typeof(*n));

  bpf_spin_lock(&l);
  bpf_list_push_back(&l, n);
  /* n still points to the just-added node */
  bpf_spin_unlock(&l);

What the verifier considers n to be after the push, and thus what can be
done with n, are changed by this patch.

Common properties both before/after this patch:
  * After push, n is only a valid reference to the node until end of
    critical section
  * After push, n cannot be pushed to any list
  * After push, the program can read the node's fields using n

Before:
  * After push, n retains the ref_obj_id which it received on
    bpf_obj_new, but the associated bpf_reference_state's
    release_on_unlock field is set to true
    * release_on_unlock field and associated logic is used to implement
      "n is only a valid ref until end of critical section"
  * After push, n cannot be written to, the node must be removed from
    the list before writing to its fields
  * After push, n is marked PTR_UNTRUSTED

After:
  * After push, n's ref is released and ref_obj_id set to 0. NON_OWN_REF
    type flag is added to reg's type, indicating that it's a non-owning
    reference.
    * NON_OWN_REF flag and logic is used to implement "n is only a
      valid ref until end of critical section"
  * n can be written to (except for special fields e.g. bpf_list_node,
    timer, ...)

Summary of specific implementation changes to achieve the above:

  * release_on_unlock field, ref_set_release_on_unlock helper, and logic
    to "release on unlock" based on that field are removed

  * The anonymous active_lock struct used by bpf_verifier_state is
    pulled out into a named struct bpf_active_lock.

  * NON_OWN_REF type flag is introduced along with verifier logic
    changes to handle non-owning refs

  * Helpers are added to use NON_OWN_REF flag to implement non-owning
    ref semantics as described above
    * invalidate_non_owning_refs - helper to clobber all non-owning refs
      matching a particular bpf_active_lock identity. Replaces
      release_on_unlock logic in process_spin_lock.
    * ref_set_non_owning - set NON_OWN_REF type flag after doing some
      sanity checking
    * ref_convert_owning_non_owning - convert owning reference w/
      specified ref_obj_id to non-owning references. Set NON_OWN_REF
      flag for each reg with that ref_obj_id and 0-out its ref_obj_id

  * Update linked_list selftests to account for minor semantic
    differences introduced by this patch
    * Writes to a release_on_unlock node ref are not allowed, while
      writes to non-owning reference pointees are. As a result the
      linked_list "write after push" failure tests are no longer scenarios
      that should fail.
    * The test##missing_lock##op and test##incorrect_lock##op
      macro-generated failure tests need to have a valid node argument in
      order to have the same error output as before. Otherwise
      verification will fail early and the expected error output won't be seen.

Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230212092715.1422619-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We can simply set root memcg as the map's memcg to disable bpf memory
accounting. bpf_map_area_alloc is a little special as it gets the memcg
from current rather than from the map, so we need to disable GFP_ACCOUNT
specifically for it.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Introduce new helper bpf_map_kvcalloc() for the memory allocation in
bpf_local_storage(). Then the allocation will charge the memory from the
map instead of from current, though currently they are the same thing as
it is only used in map creation path now. By charging map's memory into
the memcg from the map, it will be more clear.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-3-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The do_idr_lock parameter to bpf_map_free_id was introduced by commit
bd5f5f4ecb78 ("bpf: Add BPF_MAP_GET_FD_BY_ID"). However, all callers set
do_idr_lock = true since commit 1e0bd5a091e5 ("bpf: Switch bpf_map ref
counter to atomic64_t so bpf_map_inc() never fails").

While at it also inline __bpf_map_put into its only caller bpf_map_put
now that do_idr_lock can be dropped from its signature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20230202141921.4424-1-tklauser@distanz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

arch_prepare_bpf_trampoline() is used for direct attachment of eBPF
programs to various places, bypassing kprobes. It's responsible for
calling a number of eBPF programs before, instead and/or after
whatever they are attached to.

Add a s390x implementation, paying attention to the following:

- Reuse the existing JIT infrastructure, where possible.
- Like the existing JIT, prefer making multiple passes instead of
  backpatching. Currently 2 passes is enough. If literal pool is
  introduced, this needs to be raised to 3. However, at the moment
  adding literal pool only makes the code larger. If branch
  shortening is introduced, the number of passes needs to be
  increased even further.
- Support both regular and ftrace calling conventions, depending on
  the trampoline flags.
- Use expolines for indirect calls.
- Handle the mismatch between the eBPF and the s390x ABIs.
- Sign-extend fmod_ret return values.

invoke_bpf_prog() produces about 120 bytes; it might be possible to
slightly optimize this, but reaching 50 bytes, like on x86_64, looks
unrealistic: just loading cookie, __bpf_prog_enter, bpf_func, insnsi
and __bpf_prog_exit as literals already takes at least 5 * 12 = 60
bytes, and we can't use relative addressing for most of them.
Therefore, lower BPF_MAX_TRAMP_LINKS on s390x.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230129190501.1624747-5-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

s390x eBPF JIT needs to know whether a function return value is signed
and which function arguments are signed, in order to generate code
compliant with the s390x ABI.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-26-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

This way it's possible to query its value from testcases using BTF.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230128000650.1516334-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>