linux-stable.git/include/linux/blk_types.h, branch v6.8.4 Linux kernel stable tree Merge tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux 2024-01-11T21:58:04+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-11T21:58:04+00:00 01d550f0fcc06c7292f79a6f1453aac122d1d2c8 Pull block updates from Jens Axboe: "Pretty quiet round this time around. This contains: - NVMe updates via Keith: - nvme fabrics spec updates (Guixin, Max) - nvme target udpates (Guixin, Evan) - nvme attribute refactoring (Daniel) - nvme-fc numa fix (Keith) - MD updates via Song: - Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai) - Fix raid5 hang issue (Junxiao Bi) - Add Yu Kuai as Reviewer of the md subsystem - Remove deprecated flavors (Song Liu) - raid1 read error check support (Li Nan) - Better handle events off-by-1 case (Alex Lyakas) - Efficiency improvements for passthrough (Kundan) - Support for mapping integrity data directly (Keith) - Zoned write fix (Damien) - rnbd fixes (Kees, Santosh, Supriti) - Default to a sane discard size granularity (Christoph) - Make the default max transfer size naming less confusing (Christoph) - Remove support for deprecated host aware zoned model (Christoph) - Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel, Bart, Christoph)" * tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits) block: Treat sequential write preferred zone type as invalid block: remove disk_clear_zoned sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics drivers/block/xen-blkback/common.h: Fix spelling typo in comment blk-cgroup: fix rcu lockdep warning in blkg_lookup() blk-cgroup: don't use removal safe list iterators block: floor the discard granularity to the physical block size mtd_blkdevs: use the default discard granularity bcache: use the default discard granularity zram: use the default discard granularity null_blk: use the default discard granularity nbd: use the default discard granularity ubd: use the default discard granularity block: default the discard granularity to sector size bcache: discard_granularity should not be smaller than a sector block: remove two comments in bio_split_discard block: rename and document BLK_DEF_MAX_SECTORS loop: don't abuse BLK_DEF_MAX_SECTORS aoe: don't abuse BLK_DEF_MAX_SECTORS null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS ... 
Pull block updates from Jens Axboe:
 "Pretty quiet round this time around. This contains:

   - NVMe updates via Keith:
        - nvme fabrics spec updates (Guixin, Max)
        - nvme target udpates (Guixin, Evan)
        - nvme attribute refactoring (Daniel)
        - nvme-fc numa fix (Keith)

   - MD updates via Song:
        - Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
        - Fix raid5 hang issue (Junxiao Bi)
        - Add Yu Kuai as Reviewer of the md subsystem
        - Remove deprecated flavors (Song Liu)
        - raid1 read error check support (Li Nan)
        - Better handle events off-by-1 case (Alex Lyakas)

   - Efficiency improvements for passthrough (Kundan)

   - Support for mapping integrity data directly (Keith)

   - Zoned write fix (Damien)

   - rnbd fixes (Kees, Santosh, Supriti)

   - Default to a sane discard size granularity (Christoph)

   - Make the default max transfer size naming less confusing
     (Christoph)

   - Remove support for deprecated host aware zoned model (Christoph)

   - Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
     Bart, Christoph)"

* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
  block: Treat sequential write preferred zone type as invalid
  block: remove disk_clear_zoned
  sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
  drivers/block/xen-blkback/common.h: Fix spelling typo in comment
  blk-cgroup: fix rcu lockdep warning in blkg_lookup()
  blk-cgroup: don't use removal safe list iterators
  block: floor the discard granularity to the physical block size
  mtd_blkdevs: use the default discard granularity
  bcache: use the default discard granularity
  zram: use the default discard granularity
  null_blk: use the default discard granularity
  nbd: use the default discard granularity
  ubd: use the default discard granularity
  block: default the discard granularity to sector size
  bcache: discard_granularity should not be smaller than a sector
  block: remove two comments in bio_split_discard
  block: rename and document BLK_DEF_MAX_SECTORS
  loop: don't abuse BLK_DEF_MAX_SECTORS
  aoe: don't abuse BLK_DEF_MAX_SECTORS
  null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
  ...
Merge tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs 2024-01-08T18:43:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-01-08T18:43:51+00:00 3f6984e7301f4a37285cc5962f97c83c7c3b8239 Pull vfs super updates from Christian Brauner: "This contains the super work for this cycle including the long-awaited series by Jan to make it possible to prevent writing to mounted block devices: - Writing to mounted devices is dangerous and can lead to filesystem corruption as well as crashes. Furthermore syzbot comes with more and more involved examples how to corrupt block device under a mounted filesystem leading to kernel crashes and reports we can do nothing about. Add tracking of writers to each block device and a kernel cmdline argument which controls whether other writeable opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are allowed. Note that this effectively only prevents modification of the particular block device's page cache by other writers. The actual device content can still be modified by other means - e.g. by issuing direct scsi commands, by doing writes through devices lower in the storage stack (e.g. in case loop devices, DM, or MD are involved) etc. But blocking direct modifications of the block device page cache is enough to give filesystems a chance to perform data validation when loading data from the underlying storage and thus prevent kernel crashes. Syzbot can use this cmdline argument option to avoid uninteresting crashes. Also users whose userspace setup does not need writing to mounted block devices can set this option for hardening. We expect that this will be interesting to quite a few workloads. Btrfs is currently opted out of this because they still haven't merged patches we require for this to work from three kernel releases ago. - Reimplement block device freezing and thawing as holder operations on the block device. This allows us to extend block device freezing to all devices associated with a superblock and not just the main device. It also allows us to remove get_active_super() and thus another function that scans the global list of superblocks. Freezing via additional block devices only works if the filesystem chooses to use @fs_holder_ops for these additional devices as well. That currently only includes ext4 and xfs. Earlier releases switched get_tree_bdev() and mount_bdev() to use @fs_holder_ops. The remaining nilfs2 open-coded version of mount_bdev() has been converted to rely on @fs_holder_ops as well. So block device freezing for the main block device will continue to work as before. There should be no regressions in functionality. The only special case is btrfs where block device freezing for the main block device never worked because sb->s_bdev isn't set. Block device freezing for btrfs can be fixed once they can switch to @fs_holder_ops but that can happen whenever they're ready" * tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits) block: Fix a memory leak in bdev_open_by_dev() super: don't bother with WARN_ON_ONCE() super: massage wait event mechanism ext4: Block writes to journal device xfs: Block writes to log device fs: Block writes to mounted block devices btrfs: Do not restrict writes to btrfs devices block: Add config option to not allow writing to mounted devices block: Remove blkdev_get_by_*() functions bcachefs: Convert to bdev_open_by_path() fs: handle freezing from multiple devices fs: remove dead check nilfs2: simplify device handling fs: streamline thaw_super_locked ext4: simplify device handling xfs: simplify device handling fs: simplify setup_bdev_super() calls blkdev: comment fs_holder_ops porting: document block device freeze and thaw changes fs: remove unused helper ... 
Pull vfs super updates from Christian Brauner:
 "This contains the super work for this cycle including the long-awaited
  series by Jan to make it possible to prevent writing to mounted block
  devices:

   - Writing to mounted devices is dangerous and can lead to filesystem
     corruption as well as crashes. Furthermore syzbot comes with more
     and more involved examples how to corrupt block device under a
     mounted filesystem leading to kernel crashes and reports we can do
     nothing about. Add tracking of writers to each block device and a
     kernel cmdline argument which controls whether other writeable
     opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are
     allowed.

     Note that this effectively only prevents modification of the
     particular block device's page cache by other writers. The actual
     device content can still be modified by other means - e.g. by
     issuing direct scsi commands, by doing writes through devices lower
     in the storage stack (e.g. in case loop devices, DM, or MD are
     involved) etc. But blocking direct modifications of the block
     device page cache is enough to give filesystems a chance to perform
     data validation when loading data from the underlying storage and
     thus prevent kernel crashes.

     Syzbot can use this cmdline argument option to avoid uninteresting
     crashes. Also users whose userspace setup does not need writing to
     mounted block devices can set this option for hardening. We expect
     that this will be interesting to quite a few workloads.

     Btrfs is currently opted out of this because they still haven't
     merged patches we require for this to work from three kernel
     releases ago.

   - Reimplement block device freezing and thawing as holder operations
     on the block device.

     This allows us to extend block device freezing to all devices
     associated with a superblock and not just the main device. It also
     allows us to remove get_active_super() and thus another function
     that scans the global list of superblocks.

     Freezing via additional block devices only works if the filesystem
     chooses to use @fs_holder_ops for these additional devices as well.
     That currently only includes ext4 and xfs.

     Earlier releases switched get_tree_bdev() and mount_bdev() to use
     @fs_holder_ops. The remaining nilfs2 open-coded version of
     mount_bdev() has been converted to rely on @fs_holder_ops as well.
     So block device freezing for the main block device will continue to
     work as before.

     There should be no regressions in functionality. The only special
     case is btrfs where block device freezing for the main block device
     never worked because sb->s_bdev isn't set. Block device freezing
     for btrfs can be fixed once they can switch to @fs_holder_ops but
     that can happen whenever they're ready"

* tag 'vfs-6.8.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
  block: Fix a memory leak in bdev_open_by_dev()
  super: don't bother with WARN_ON_ONCE()
  super: massage wait event mechanism
  ext4: Block writes to journal device
  xfs: Block writes to log device
  fs: Block writes to mounted block devices
  btrfs: Do not restrict writes to btrfs devices
  block: Add config option to not allow writing to mounted devices
  block: Remove blkdev_get_by_*() functions
  bcachefs: Convert to bdev_open_by_path()
  fs: handle freezing from multiple devices
  fs: remove dead check
  nilfs2: simplify device handling
  fs: streamline thaw_super_locked
  ext4: simplify device handling
  xfs: simplify device handling
  fs: simplify setup_bdev_super() calls
  blkdev: comment fs_holder_ops
  porting: document block device freeze and thaw changes
  fs: remove unused helper
  ...
block: reject invalid operation in submit_bio_noacct 2023-12-26T16:27:14+00:00 Christoph Hellwig hch@lst.de 2023-12-21T07:05:38+00:00 1c042f8d4bc342b7985b1de3d76836f1a1083b65 submit_bio_noacct allows completely invalid operations, or operations that are not supported in the bio path. Extent the existing switch statement to rejcect all invalid types. Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the middle of the zone management operations and the switch statement can follow the numerical order of the operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> 
submit_bio_noacct allows completely invalid operations, or operations
that are not supported in the bio path.  Extent the existing switch
statement to rejcect all invalid types.

Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the
middle of the zone management operations and the switch statement can
follow the numerical order of the operations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231221070538.1112446-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: warn once for each partition in bio_check_ro() 2023-11-28T19:11:08+00:00 Yu Kuai yukuai3@huawei.com 2023-11-28T12:30:27+00:00 67d995e069535c32829f5d368d919063492cec6e Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in bio_check_ro()") fix message storm by limit the rate, however, there will still be lots of message in the long term. Fix it better by warn once for each partition. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231128123027.971610-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 
Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in
bio_check_ro()") fix message storm by limit the rate, however, there
will still be lots of message in the long term. Fix it better by warn
once for each partition.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231128123027.971610-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: move .bd_inode into 1st cacheline of block_device 2023-11-28T19:11:08+00:00 Ming Lei ming.lei@redhat.com 2023-11-28T12:30:26+00:00 fad907cffd4bde7384812cf32fcf69becab805cc The .bd_inode field of block_device is used in IO fast path of blkdev_write_iter() and blkdev_llseek(), so it is more efficient to keep it into the 1st cacheline. .bd_openers is only touched in open()/close(), and .bd_size_lock is only for updating bdev capacity, which is in slow path too. So swap .bd_inode layout with .bd_openers & .bd_size_lock to move .bd_inode into the 1st cache line. Cc: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20231128123027.971610-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> 
The .bd_inode field of block_device is used in IO fast path of
blkdev_write_iter() and blkdev_llseek(), so it is more efficient to keep
it into the 1st cacheline.

.bd_openers is only touched in open()/close(), and .bd_size_lock is only
for updating bdev capacity, which is in slow path too.

So swap .bd_inode layout with .bd_openers & .bd_size_lock to move
.bd_inode into the 1st cache line.

Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231128123027.971610-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block: Add config option to not allow writing to mounted devices 2023-11-18T13:59:25+00:00 Jan Kara jack@suse.cz 2023-11-01T17:43:08+00:00 ed5cc702d311c14b653323d76062b0294effa66e Writing to mounted devices is dangerous and can lead to filesystem corruption as well as crashes. Furthermore syzbot comes with more and more involved examples how to corrupt block device under a mounted filesystem leading to kernel crashes and reports we can do nothing about. Add tracking of writers to each block device and a kernel cmdline argument which controls whether other writeable opens to block devices open with BLK_OPEN_RESTRICT_WRITES flag are allowed. We will make filesystems use this flag for used devices. Note that this effectively only prevents modification of the particular block device's page cache by other writers. The actual device content can still be modified by other means - e.g. by issuing direct scsi commands, by doing writes through devices lower in the storage stack (e.g. in case loop devices, DM, or MD are involved) etc. But blocking direct modifications of the block device page cache is enough to give filesystems a chance to perform data validation when loading data from the underlying storage and thus prevent kernel crashes. Syzbot can use this cmdline argument option to avoid uninteresting crashes. Also users whose userspace setup does not need writing to mounted block devices can set this option for hardening. Link: https://lore.kernel.org/all/60788e5d-5c7c-1142-e554-c21d709acfd9@linaro.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231101174325.10596-3-jack@suse.cz Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org> 
Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more and
more involved examples how to corrupt block device under a mounted
filesystem leading to kernel crashes and reports we can do nothing
about. Add tracking of writers to each block device and a kernel cmdline
argument which controls whether other writeable opens to block devices
open with BLK_OPEN_RESTRICT_WRITES flag are allowed. We will make
filesystems use this flag for used devices.

Note that this effectively only prevents modification of the particular
block device's page cache by other writers. The actual device content
can still be modified by other means - e.g. by issuing direct scsi
commands, by doing writes through devices lower in the storage stack
(e.g. in case loop devices, DM, or MD are involved) etc. But blocking
direct modifications of the block device page cache is enough to give
filesystems a chance to perform data validation when loading data from
the underlying storage and thus prevent kernel crashes.

Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening.

Link: https://lore.kernel.org/all/60788e5d-5c7c-1142-e554-c21d709acfd9@linaro.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-3-jack@suse.cz
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
super: remove bd_fsfreeze_sb 2023-11-18T13:59:23+00:00 Christian Brauner brauner@kernel.org 2023-10-24T13:01:13+00:00 90f95dc415de23267b888f8238c4a19fa0f66b89 Remove bd_fsfreeze_sb as it's now unused and can be removed. Also move bd_fsfreeze_count down to not have it weirdly placed in the middle of the holder fields. Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-7-599c19f4faac@kernel.org Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Suggested-by: Jan Kara <jack@suse.cz> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org> 
Remove bd_fsfreeze_sb as it's now unused and can be removed. Also move
bd_fsfreeze_count down to not have it weirdly placed in the middle of
the holder fields.

Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-7-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
bdev: implement freeze and thaw holder operations 2023-11-18T13:59:23+00:00 Christian Brauner brauner@kernel.org 2023-09-27T13:21:16+00:00 49ef8832fb1a9e0da0020eb17480fd286433bc13 The old method of implementing block device freeze and thaw operations required us to rely on get_active_super() to walk the list of all superblocks on the system to find any superblock that might use the block device. This is wasteful and not very pleasant overall. Now that we can finally go straight from block device to owning superblock things become way simpler. Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-5-599c19f4faac@kernel.org Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> 
The old method of implementing block device freeze and thaw operations
required us to rely on get_active_super() to walk the list of all
superblocks on the system to find any superblock that might use the
block device. This is wasteful and not very pleasant overall.

Now that we can finally go straight from block device to owning
superblock things become way simpler.

Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-5-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
fs, block: remove bdev->bd_super 2023-08-09T06:21:22+00:00 Christoph Hellwig hch@lst.de 2023-08-07T11:26:25+00:00 6a3207395563f724d91231ec0aa7c4d95bf9591d bdev->bd_super is unused now, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christian Brauner <brauner@kernel.org> Message-Id: <20230807112625.652089-5-hch@lst.de> Signed-off-by: Christian Brauner <brauner@kernel.org> 
bdev->bd_super is unused now, remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230807112625.652089-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2023-06-30T18:57:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-06-30T18:57:07+00:00 ca7ce08d6a063e0ccb91dc57f9bc213120d0d1a7 Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ... 
Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
  lpfc, qla2xxx).

  We have a couple of major core changes impacting other systems:

   - Command Duration Limits, which spills into block and ATA

   - block level Persistent Reservation Operations, which touches block,
     nvme, target and dm

  Both of these are added with merge commits containing a cover letter
  explaining what's going on"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
  scsi: core: Improve warning message in scsi_device_block()
  scsi: core: Replace scsi_target_block() with scsi_block_targets()
  scsi: core: Don't wait for quiesce in scsi_device_block()
  scsi: core: Don't wait for quiesce in scsi_stop_queue()
  scsi: core: Merge scsi_internal_device_block() and device_block()
  scsi: sg: Increase number of devices
  scsi: bsg: Increase number of devices
  scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
  scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
  scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
  scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
  scsi: ufs: ufs-qcom: Switch to the new ICE API
  scsi: ufs: dt-bindings: qcom: Add ICE phandle
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
  scsi: ufs: core: Remove dedicated hwq for dev command
  scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
  scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
  ...