Add a BUILD_BUG_ON() call to ensure that we are not missing entries in
cmd_flag_name[].

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240719112912.3830443-13-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add atomic write support, as follows:
- add helper functions to get request_queue atomic write limits
- report request_queue atomic write support limits to sysfs and update Doc
- support to safely merge atomic writes
- deal with splitting atomic writes
- misc helper functions
- add a per-request atomic write flag

New request_queue limits are added, as follows:
- atomic_write_hw_max is set by the block driver and is the maximum length
  of an atomic write which the device may support. It is not
  necessarily a power-of-2.
- atomic_write_max_sectors is derived from atomic_write_hw_max_sectors and
  max_hw_sectors. It is always a power-of-2. Atomic writes may be merged,
  and atomic_write_max_sectors would be the limit on a merged atomic write
  request size. This value is not capped at max_sectors, as the value in
  max_sectors can be controlled from userspace, and it would only cause
  trouble if userspace could limit atomic_write_unit_max_bytes and the
  other atomic write limits.
- atomic_write_hw_unit_{min,max} are set by the block driver and are the
  min/max length of an atomic write unit which the device may support. They
  both must be a power-of-2. Typically atomic_write_hw_unit_max will hold
  the same value as atomic_write_hw_max.
- atomic_write_unit_{min,max} are derived from
  atomic_write_hw_unit_{min,max}, max_hw_sectors, and block core limits.
  Both min and max values must be a power-of-2.
- atomic_write_hw_boundary is set by the block driver. If non-zero, it
  indicates an LBA space boundary at which an atomic write straddles no
  longer is atomically executed by the disk. The value must be a
  power-of-2. Note that it would be acceptable to enforce a rule that
  atomic_write_hw_boundary_sectors is a multiple of
  atomic_write_hw_unit_max, but the resultant code would be more
  complicated.

All atomic writes limits are by default set 0 to indicate no atomic write
support. Even though it is assumed by Linux that a logical block can always
be atomically written, we ignore this as it is not of particular interest.
Stacked devices are just not supported either for now.

An atomic write must always be submitted to the block driver as part of a
single request. As such, only a single BIO must be submitted to the block
layer for an atomic write. When a single atomic write BIO is submitted, it
cannot be split. As such, atomic_write_unit_{max, min}_bytes are limited
by the maximum guaranteed BIO size which will not be required to be split.
This max size is calculated by request_queue max segments and the number
of bvecs a BIO can fit, BIO_MAX_VECS. Currently we rely on userspace
issuing a write with iovcnt=1 for pwritev2() - as such, we can rely on each
segment containing PAGE_SIZE of data, apart from the first+last, which each
can fit logical block size of data. The first+last will be LBS
length/aligned as we rely on direct IO alignment rules also.

New sysfs files are added to report the following atomic write limits:
- atomic_write_unit_max_bytes - same as atomic_write_unit_max_sectors in
				bytes
- atomic_write_unit_min_bytes - same as atomic_write_unit_min_sectors in
				bytes
- atomic_write_boundary_bytes - same as atomic_write_hw_boundary_sectors in
				bytes
- atomic_write_max_bytes      - same as atomic_write_max_sectors in bytes

Atomic writes may only be merged with other atomic writes and only under
the following conditions:
- total resultant request length <= atomic_write_max_bytes
- the merged write does not straddle a boundary

Helper function bdev_can_atomic_write() is added to indicate whether
atomic writes may be issued to a bdev. If a bdev is a partition, the
partition start must be aligned with both atomic_write_unit_min_sectors
and atomic_write_hw_boundary_sectors.

FSes will rely on the block layer to validate that an atomic write BIO
submitted will be of valid size, so add blk_validate_atomic_write_op_size()
for this purpose. Userspace expects an atomic write which is of invalid
size to be rejected with -EINVAL, so add BLK_STS_INVAL for this. Also use
BLK_STS_INVAL for when a BIO needs to be split, as this should mean an
invalid size BIO.

Flag REQ_ATOMIC is used for indicating an atomic write.

Co-developed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20240620125359.2684798-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull bdev flags update from Al Viro:
 "Compactifying bdev flags.

  We can easily have up to 24 flags with sane atomicity, _without_
  pushing anything out of the first cacheline of struct block_device"

* tag 'pull-bd_flags-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bdev: move ->bd_make_it_fail to ->__bd_flags
  bdev: move ->bd_ro_warned to ->__bd_flags
  bdev: move ->bd_has_subit_bio to ->__bd_flags
  bdev: move ->bd_write_holder into ->__bd_flags
  bdev: move ->bd_read_only to ->__bd_flags
  bdev: infrastructure for flags
  wrapper for access to ->bd_partno
  Use bdev_is_paritition() instead of open-coding it

Pull bdev bd_inode updates from Al Viro:
 "Replacement of bdev->bd_inode with sane(r) set of primitives by me and
  Yu Kuai"

* tag 'pull-bd_inode-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RIP ->bd_inode
  dasd_format(): killing the last remaining user of ->bd_inode
  nilfs_attach_log_writer(): use ->bd_mapping->host instead of ->bd_inode
  block/bdev.c: use the knowledge of inode/bdev coallocation
  gfs2: more obvious initializations of mapping->host
  fs/buffer.c: massage the remaining users of ->bd_inode to ->bd_mapping
  blk_ioctl_{discard,zeroout}(): we only want ->bd_inode->i_mapping here...
  grow_dev_folio(): we only want ->bd_inode->i_mapping there
  use ->bd_mapping instead of ->bd_inode->i_mapping
  block_device: add a pointer to struct address_space (page cache of bdev)
  missing helpers: bdev_unhash(), bdev_drop()
  block: move two helpers into bdev.c
  block2mtd: prevent direct access of bd_inode
  dm-vdo: use bdev_nr_bytes(bdev) instead of i_size_read(bdev->bd_inode)
  blkdev_write_iter(): saner way to get inode and bdev
  bcachefs: remove dead function bdev_sectors()
  ext4: remove block_device_ejected()
  erofs_buf: store address_space instead of inode
  erofs: switch erofs_bread() to passing offset instead of block number

Pull block updates from Jens Axboe:

 - Add a partscan attribute in sysfs, fixing an issue with systemd
   relying on an internal interface that went away.

 - Attempt #2 at making long running discards interruptible. The
   previous attempt went into 6.9, but we ended up mostly reverting it
   as it had issues.

 - Remove old ida_simple API in bcache

 - Support for zoned write plugging, greatly improving the performance
   on zoned devices.

 - Remove the old throttle low interface, which has been experimental
   since 2017 and never made it beyond that and isn't being used.

 - Remove page->index debugging checks in brd, as it hasn't caught
   anything and prepares us for removing in struct page.

 - MD pull request from Song

 - Don't schedule block workers on isolated CPUs

* tag 'for-6.10/block-20240511' of git://git.kernel.dk/linux: (84 commits)
  blk-throttle: delay initialization until configuration
  blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW
  block: fix that util can be greater than 100%
  block: support to account io_ticks precisely
  block: add plug while submitting IO
  bcache: fix variable length array abuse in btree_iter
  bcache: Remove usage of the deprecated ida_simple_xx() API
  md: Revert "md: Fix overflow in is_mddev_idle"
  blk-lib: check for kill signal in ioctl BLKDISCARD
  block: add a bio_await_chain helper
  block: add a blk_alloc_discard_bio helper
  block: add a bio_chain_and_submit helper
  block: move discard checks into the ioctl handler
  block: remove the discard_granularity check in __blkdev_issue_discard
  block/ioctl: prefer different overflow check
  null_blk: Fix the WARNING: modpost: missing MODULE_DESCRIPTION()
  block: fix and simplify blkdevparts= cmdline parsing
  block: refine the EOF check in blkdev_iomap_begin
  block: add a partscan sysfs attribute for disks
  block: add a disk_has_partscan helper
  ...

All EV4 machines are already gone, and the remaining EV5 based machines
all support the slightly more modern EV56 generation as well.
Debian only supports EV56 and later.

Drop both of these and build kernels optimized for EV56 and higher
when the "generic" options is selected, tuning for an out-of-order
EV6 pipeline, same as Debian userspace.

Since this was the only supported architecture without 8-bit and
16-bit stores, common kernel code no longer has to worry about
aligning struct members, and existing workarounds from the block
and tty layers can be removed.

The alpha memory management code no longer needs an abstraction
for the differences between EV4 and EV5+.

Link: https://lists.debian.org/debian-alpha/2023/05/msg00009.html
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

points to ->i_data of coallocated inode.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20240411145346.2516848-1-viro@zeniv.linux.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>