linux-stable.git/include/linux/blk_types.h, branch v4.8.2

block: rename bio bi_rw to bi_opf

2016-08-07T20:41:02+00:00

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe

block/mm: make bdev_ops->rw_page() take a bool for read/write

2016-08-07T20:41:02+00:00

Commit abf545484d31 changed it from an 'rw' flags type to the
newer ops based interface, but now we're effectively leaking
some bdev internals to the rest of the kernel. Since we only
care about whether it's a read or a write at that level, just
pass in a bool 'is_write' parameter instead.

Then we can also move op_is_write() and friends back under
CONFIG_BLOCK protection.

Reviewed-by: Mike Christie 
Signed-off-by: Jens Axboe

mm/block: convert rw_page users to bio op use

2016-08-04T20:25:33+00:00

The rw_page users were not converted to use bio/req ops. As a result
bdev_write_page is not passing down REQ_OP_WRITE and the IOs will
be sent down as reads.

Signed-off-by: Mike Christie 
Fixes: 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code")

Modified by me to:

1) Drop op_flags passing into ->rw_page(), as we don't use it.
2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK

Signed-off-by: Jens Axboe

Merge branch 'for-4.8/drivers' of git://git.kernel.dk/linux-block

2016-07-26T22:37:51+00:00

Pull block driver updates from Jens Axboe:
 "This branch also contains core changes.  I've come to the conclusion
  that from 4.9 and forward, I'll be doing just a single branch.  We
  often have dependencies between core and drivers, and it's hard to
  always split them up appropriately without pulling core into drivers
  when that happens.

  That said, this contains:

   - separate secure erase type for the core block layer, from
     Christoph.

   - set of discard fixes, from Christoph.

   - bio shrinking fixes from Christoph, as a followup up to the
     op/flags change in the core branch.

   - map and append request fixes from Christoph.

   - NVMeF (NVMe over Fabrics) code from Christoph.  This is pretty
     exciting!

   - nvme-loop fixes from Arnd.

   - removal of ->driverfs_dev from Dan, after providing a
     device_add_disk() helper.

   - bcache fixes from Bhaktipriya and Yijing.

   - cdrom subchannel read fix from Vchannaiah.

   - set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.

   - set of drbd updates and fixes from Fabian, Lars, and Philipp.

   - mg_disk error path fix from Bart.

   - user notification for failed device add for loop, from Minfei.

   - NVMe in general:
        + NVMe delay quirk from Guilherme.
        + SR-IOV support and command retry limits from Keith.
        + fix for memory-less NUMA node from Masayoshi.
        + use UINT_MAX for discard sectors, from Minfei.
        + cancel IO fixes from Ming.
        + don't allocate unused major, from Neil.
        + error code fixup from Dan.
        + use constants for PSDT/FUSE from James.
        + variable init fix from Jay.
        + fabrics fixes from Ming, Sagi, and Wei.
        + various fixes"

* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
  nvme/pci: Provide SR-IOV support
  nvme: initialize variable before logical OR'ing it
  block: unexport various bio mapping helpers
  scsi/osd: open code blk_make_request
  target: stop using blk_make_request
  block: simplify and export blk_rq_append_bio
  block: ensure bios return from blk_get_request are properly initialized
  virtio_blk: use blk_rq_map_kern
  memstick: don't allow REQ_TYPE_BLOCK_PC requests
  block: shrink bio size again
  block: simplify and cleanup bvec pool handling
  block: get rid of bio_rw and READA
  block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
  block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
  NVMe: don't allocate unused nvme_major
  nvme: avoid crashes when node 0 is memoryless node.
  nvme: Limit command retries
  loop: Make user notify for adding loop device failed
  nvme-loop: fix nvme-loop Kconfig dependencies
  nvmet: fix return value check in nvmet_subsys_alloc()
  ...

block: shrink bio size again

2016-07-20T23:37:04+00:00

The recent ops split grew the bio by adding the new ioprio field.
Shrink it again by using a 16-bit field for the bi_flags value and
filling the holes near the beginning of the structure.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Mike Christie 
Signed-off-by: Jens Axboe

block: simplify and cleanup bvec pool handling

2016-07-20T23:37:02+00:00

Instead of a flag and an index just make sure an index of 0 means
no need to free the bvec array.  Also move the constants related
to the bvec pools together and use a consistent naming scheme for
them.

Signed-off-by: Christoph Hellwig 
Reviewed-by: Johannes Thumshirn 
Reviewed-by: Mike Christie 
Signed-off-by: Jens Axboe

block: move two bvec structure into bvec.h

2016-06-09T16:02:47+00:00

This patch moves 'struct bio_vec' and 'struct bvec_iter'
into 'include/linux/bvec.h', then always include this header
into 'include/linux/blk_types.h'.

With this change, both 'struct bvec_iter' and bvec iterator
helpers don't depend on CONFIG_BLOCK any more, then we can
use bvec iterator to implement iterate_bvec(): lib/iov_iter.c.

Reviewed-by: Christoph Hellwig 
Suggested-by: Christoph Hellwig 
Signed-off-by: Ming Lei 
Tested-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

block: add a separate operation type for secure erase

2016-06-09T15:52:25+00:00

Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.

Signed-off-by: Christoph Hellwig 
Signed-off-by: Jens Axboe

block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSH

2016-06-07T19:41:38+00:00

To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.

Signed-off-by: Mike Christie 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

block, drivers: add REQ_OP_FLUSH operation

2016-06-07T19:41:38+00:00

This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.

Signed-off-by: Mike Christie 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe