linux-stable.git/include/linux/blk-cgroup.h, branch v4.8.2

block: rename bio bi_rw to bi_opf

2016-08-07T20:41:02+00:00

Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.

Signed-off-by: Jens Axboe

blkg_rwstat: separate op from flags

2016-06-07T19:41:38+00:00

The bio and request operation and flags are going to be separate
definitions, so we cannot pass them in as a bitmap. This patch
converts the blkg_rwstat code and its caller, cfq, to pass in the
values separately.

Signed-off-by: Mike Christie 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

block, drivers, cgroup: use op_is_write helper instead of checking for REQ_WRITE

2016-06-07T19:41:38+00:00

We currently set REQ_WRITE/WRITE for all non READ IOs
like discard, flush, writesame, etc. In the next patches where we
no longer set up the op as a bitmap, we will not be able to
detect a operation direction like writesame by testing if REQ_WRITE is
set.

This patch converts the drivers and cgroup to use the
op_is_write helper. This should just cover the simple
cases. I did dm, md and bcache in their own patches
because they were more involved.

Signed-off-by: Mike Christie 
Reviewed-by: Hannes Reinecke 
Signed-off-by: Jens Axboe

blkcg: fix incorrect read/write sync/async stat accounting

2015-10-27T06:04:56+00:00

While unifying how blkcg stats are collected, 77ea733884eb ("blkcg:
move io_service_bytes and io_serviced stats into blkcg_gq")
incorrectly used bio->flags instead of bio->rw to tell the IO type.
This made IOs to be accounted as the wrong type.  Fix it.

Signed-off-by: Tejun Heo 
Fixes: 77ea733884eb ("blkcg: move io_service_bytes and io_serviced stats into blkcg_gq")
Reviewed-by: Jeff Moyer 
Signed-off-by: Jens Axboe

blkcg: use CGROUP_WEIGHT_* scale for io.weight on the unified hierarchy

2015-08-18T22:49:36+00:00

cgroup is trying to make interface consistent across different
controllers.  For weight based resource control, the knob should have
the range [1, 10000] and default to 100.  This patch updates
cfq-iosched so that the weight range conforms.  The internal
calculations have enough range and the widening of the weight range
shouldn't cause any problem.

* blkcg_policy->cpd_bind_fn() is added.  If present, this is invoked
  when blkcg is attached to a hierarchy.

* cfq_cpd_init() is updated to use the new default value on the
  unified hierarchy.

* cfq_cpd_bind() callback is implemented to clear per-blkg configs and
  apply the default config matching the hierarchy type.

* cfqd->root_group->[leaf_]weight initialization in cfq_init_queue()
  is moved into !CONFIG_CFQ_GROUP_IOSCHED block.  cfq_cpd_bind() is
  now responsible for initializing the initial weights when blkcg is
  enabled.

Signed-off-by: Tejun Heo 
Cc: Vivek Goyal 
Cc: Arianna Avanzini 
Signed-off-by: Jens Axboe

blkcg: implement interface for the unified hierarchy

2015-08-18T22:49:35+00:00

blkcg interface grew to be the biggest of all controllers and
unfortunately most inconsistent too.  The interface files are
inconsistent with a number of cloes duplicates.  Some files have
recursive variants while others don't.  There's distinction between
normal and leaf weights which isn't intuitive and there are a lot of
stat knobs which don't make much sense outside of debugging and expose
too much implementation details to userland.

In the unified hierarchy, everything is always hierarchical and
internal nodes can't have tasks rendering the two structural issues
twisting the current interface.  The interface has to be updated in a
significant anyway and this is a good chance to revamp it as a whole.
This patch implements blkcg interface for the unified hierarchy.

* (from a previous patch) blkcg is identified by "io" instead of
  "blkio" on the unified hierarchy.  Given that the whole interface is
  updated anyway, the rename shouldn't carry noticeable conversion
  overhead.

* The original interface consisted of 27 files is replaced with the
  following three files.

  blkio.stat	: per-blkcg stats
  blkio.weight	: per-cgroup and per-cgroup-queue weight settings
  blkio.max	: per-cgroup-queue bps and iops max limits

Documentation/cgroups/unified-hierarchy.txt updated accordingly.

v2: blkcg_policy->dfl_cftypes wasn't removed on
    blkcg_policy_unregister() corrupting the cftypes list.  Fixed.

Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe

blkcg: misc preparations for unified hierarchy interface

2015-08-18T22:49:18+00:00

* Export blkg_dev_name()

* Drop unnecessary @cft from __cfq_set_weight().

Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe

blkcg: move body parsing from blkg_conf_prep() to its callers

2015-08-18T22:49:18+00:00

Currently, blkg_conf_prep() expects input to be of the following form

 MAJ:MIN NUM

and reads the NUM part into blkg_conf_ctx->v.  This is quite
restrictive and gets in the way in implementing blkcg interface for
the unified hierarchy.  This patch updates blkg_conf_prep() so that it
expects

 MAJ:MIN BODY_STR

where BODY_STR is an arbitrary string.  blkg_conf_ctx->v is replaced
with ->body which is a char pointer pointing to the start of BODY_STR.
Parsing of the body is moved to blkg_conf_prep()'s callers.

To allow using, for example, strsep() on blkg_conf_ctx->val, it is a
non-const pointer and to accommodate that const is dropped from @input
too.

This doesn't cause any behavior changes.

Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe

blkcg: mark existing cftypes as legacy

2015-08-18T22:49:18+00:00

blkcg is about to grow interface for the unified hierarchy.  Add
legacy to existing cftypes.

* blkcg_policy->cftypes -> blkcg_policy->legacy_cftypes
* blk-cgroup.c:blkcg_files -> blkcg_legacy_files
* cfq-iosched.c:cfq_blkcg_files -> cfq_blkcg_legacy_files
* blk-throttle.c:throtl_files -> throtl_legacy_files

Pure renames.  No functional change.

Signed-off-by: Tejun Heo 
Signed-off-by: Jens Axboe

blkcg: rename subsystem name from blkio to io

2015-08-18T22:49:18+00:00

blkio interface has become messy over time and is currently the
largest.  In addition to the inconsistent naming scheme, it has
multiple stat files which report more or less the same thing, a number
of debug stat files which expose internal details which shouldn't have
been part of the public interface in the first place, recursive and
non-recursive stats and leaf and non-leaf knobs.

Both recursive vs. non-recursive and leaf vs. non-leaf distinctions
don't make any sense on the unified hierarchy as only leaf cgroups can
contain processes.  cgroups is going through a major interface
revision with the unified hierarchy involving significant fundamental
usage changes and given that a significant portion of the interface
doesn't make sense anymore, it's a good time to reorganize the
interface.

As the first step, this patch renames the external visible subsystem
name from "blkio" to "io".  This is more concise, matches the other
two major subsystem names, "cpu" and "memory", and better suited as
blkcg will be involved in anything writeback related too whether an
actual block device is involved or not.

As the subsystem legacy_name is set to "blkio", the only userland
visible change outside the unified hierarchy is that blkcg is reported
as "io" instead of "blkio" in the subsystem initialized message during
boot.  On the unified hierarchy, blkcg now appears as "io".

Signed-off-by: Tejun Heo 
Cc: Li Zefan 
Cc: Johannes Weiner 
Cc: cgroups@vger.kernel.org
Signed-off-by: Jens Axboe