[ Upstream commit b4d961351aa84fdf0148783fb1f3a1391b8a0adb ]

Use the descriptor's `ep_mem_offset` to calculate the start of the endpoint
memory access array and to comply with the FF-A spec instead of defaulting
to `sizeof(struct ffa_mem_region)`.
This requires moving `ffa_mem_region_additional_setup()` earlier in the setup
flow.
Also, add sanity checks to ensure the calculated descriptor offsets do not
exceed `max_fragsize`.

Fixes: 113580530ee7 ("firmware: arm_ffa: Update memory descriptor to support v1.1 format")
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://patch.msgid.link/20260702103848.1647249-3-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

FF-A v1.2 introduced 16 byte IMPLEMENTATION DEFINED value in the endpoint
memory access descriptor to allow any sender could to specify an its any
custom value for each receiver. Also this value must be specified by the
receiver when retrieving the memory region. The sender must ensure it
informs the receiver of this value via an IMPLEMENTATION DEFINED mechanism
such as a partition message.

So the FF-A driver can use the message interfaces to communicate the value
and set the same in the ffa_mem_region_attributes structures when using
the memory interfaces.

The driver ensure that the size of the endpoint memory access descriptors
is set correctly based on the FF-A version.

Fixes: 9fac08d9d985 ("firmware: arm_ffa: Upgrade FF-A version to v1.2 in the driver")
Reported-by: Lixiang Mao <liximao@qti.qualcomm.com>
Tested-by: Lixiang Mao <liximao@qti.qualcomm.com>
Message-Id: <20250923150927.1218364-1-sudeep.holla@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The minimum size and alignment boundary for FFA_RXTX_MAP is returned in
bit[1:0]. Mask off any other bits in w2 when reading the minimum buffer
size in hyp_ffa_post_init.

Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Per Larsen <perlarsen@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

As per the spec, one 32 bit reserved entry is missing here, add it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Fixes: 910cc1acc9b4 ("firmware: arm_ffa: Add support for passing UUID in FFA_MSG_SEND2")
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Message-Id: <28a624fbf416975de4fbe08cfbf7c2db89cb630e.1748948911.git.viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Framework notifications are doorbells that are rung by the partition
managers to signal common events to an endpoint. These doorbells cannot
be rung by an endpoint directly. A partition manager can signal a
Framework notification in response to an FF-A ABI invocation by an
endpoint.

Two additional notify_ops interface is being added for any FF-A device/
driver to register and unregister for such a framework notifications.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-16-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

The basic and mandatory features of FF-A v1.2 are all supported now.
The driver supported version can be bumped from v1.1 to v1.2

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-11-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

FF-A v1.2 introduces UUID field in partition message header used in
FFA_MSG_SEND2 to enable partitions/endpoints exposing multiple UUIDs.

Add the support for passing UUID in FFA_MSG_SEND2.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-10-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Add a helper that allows FF-A drivers to check if the partition can
receive the direct requests via the FFA_MSG_SEND_DIRECT_REQ2 ABI.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-9-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Both the FF-A core and the bus were in a single module before the
commit 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules").

The arm_ffa_bus_exit() takes care of unregistering all the FF-A devices.
Now that there are 2 distinct modules, if the core driver is unloaded and
reloaded, it will end up adding duplicate FF-A devices as the previously
registered devices weren't unregistered when we cleaned up the modules.

Fix the same by unregistering all the FF-A devices on the FF-A bus during
the cleaning up of the partitions and hence the cleanup of the module.

Fixes: 18c250bd7ed0 ("firmware: arm_ffa: Split bus and driver into distinct modules")
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-8-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

Currently ffa_sync_send_receive2() takes UUID as a separate parameter
instead of using the one available in ffa_device structure.

Change the prototype of ffa_sync_send_receive2() to align with the
ffa_sync_send_receive() and use ffa_device->uuid.

Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-3-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>