linux-stable.git/include/dt-bindings/reset, branch v6.3.3 Linux kernel stable tree Merge tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2023-02-27T18:04:49+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-27T18:04:49+00:00 11c70529983e8136ea1bd5c32e4f9cd14503c644 Pull ARM SoC driver updates from Arnd Bergmann: "As usual, there are lots of minor driver changes across SoC platforms from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung. These usually add support for additional chip variations in existing drivers, but also add features or bugfixes. The SCMI firmware subsystem gains a unified raw userspace interface through debugfs, which can be used for validation purposes. Newly added drivers include: - New power management drivers for StarFive JH7110, Allwinner D1 and Renesas RZ/V2M - A driver for Qualcomm battery and power supply status - A SoC device driver for identifying Nuvoton WPCM450 chips - A regulator coupler driver for Mediatek MT81xxv" * tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) power: supply: Introduce Qualcomm PMIC GLINK power supply soc: apple: rtkit: Do not copy the reg state structure to the stack soc: sunxi: SUN20I_PPU should depend on PM memory: renesas-rpc-if: Remove redundant division of dummy soc: qcom: socinfo: Add IDs for IPQ5332 and its variant dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1 firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/ MAINTAINERS: Update qcom CPR maintainer entry dt-bindings: firmware: document Qualcomm SM8550 SCM dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants soc: qcom: socinfo: Add support for new field in revision 17 soc: qcom: smd-rpm: Add IPQ9574 compatible soc: qcom: pmic_glink: remove redundant calculation of svid soc: qcom: stats: Populate all subsystem debugfs files dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies soc: qcom: pmic_glink: Introduce altmode support ... 
Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, there are lots of minor driver changes across SoC platforms
  from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
  These usually add support for additional chip variations in existing
  drivers, but also add features or bugfixes.

  The SCMI firmware subsystem gains a unified raw userspace interface
  through debugfs, which can be used for validation purposes.

  Newly added drivers include:

   - New power management drivers for StarFive JH7110, Allwinner D1 and
     Renesas RZ/V2M

   - A driver for Qualcomm battery and power supply status

   - A SoC device driver for identifying Nuvoton WPCM450 chips

   - A regulator coupler driver for Mediatek MT81xxv"

* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  power: supply: Introduce Qualcomm PMIC GLINK power supply
  soc: apple: rtkit: Do not copy the reg state structure to the stack
  soc: sunxi: SUN20I_PPU should depend on PM
  memory: renesas-rpc-if: Remove redundant division of dummy
  soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
  dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
  dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
  firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
  MAINTAINERS: Update qcom CPR maintainer entry
  dt-bindings: firmware: document Qualcomm SM8550 SCM
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  soc: qcom: socinfo: Add support for new field in revision 17
  soc: qcom: smd-rpm: Add IPQ9574 compatible
  soc: qcom: pmic_glink: remove redundant calculation of svid
  soc: qcom: stats: Populate all subsystem debugfs files
  dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
  soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
  soc: qcom: pmic_glink: Introduce altmode support
  ...
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2023-02-25T23:16:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-02-25T23:16:23+00:00 1ec35eadc3b448c91a6b763371a7073444e95f9d Pull clk updates from Stephen Boyd: "We have one small patch to the clk core this time around. It fixes a corner case with the CLK_OPS_PARENT_ENABLE flag combined with clk_core_is_enabled() where it hangs the system. We'll simply assume the clk is disabled if the parent is disabled and the flag is set. Trying to turn on the parent to check the enable state of the clk runs into system hangs at boot. We let this bake in -next for a couple weeks to make sure there aren't any more issues because the last attempt to fix this ran into hangs and had to be reverted. Note: There were some more patches to the core framework around sync_state and disabling unused clks, but I asked for that to be reverted from the qcom PR because it isn't ready and we're still discussing the best solution on the list. Outside of the core clk framework, we have the usual collection of clk driver updates and support for new SoCs (which seems to never stop). The dirstat is dominated by Qualcomm because they added support for quite a few SoCs this time around and also migrated quite a few of their drivers to clk_parent_data. The other big diff is in the Mediatek clk drivers that saw a significant rework this cycle to similarly modernize the code, and we'll see that work continue in the next cycle as well. Nothing really jumps out as scary here, except that the significant churn in parent data descriptions can have typos that go unnoticed. More details below. Core: - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() New Drivers: - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET ref clocks - Support for Mediatek MT7891 SoC clks - Support for many Qualcomm clk controllers: - QDU1000/QRU1000 global clock controller - SA8775P global clock controller - SM8550 TCSR and display clock controller - SM6350 clock controller - MSM8996 CBF and APCS clock controllers Updates: - Various cleanups and improvements to Mediatek clk drivers to reduce code size and modernize the drivers - Support for Versa 5P49V60 clks - Disable R-Car H3 ES1.*, as it was only available to an internal development group and needed a lot of quirks and workarounds - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and resets on Renesas RZ/V2M - Add display clocks on Renesas R-Car V4H - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L - Free the imx_uart_clocks even if imx_register_uart_clocks returns early - Get the stdout clocks count from device tree on i.MX - Drop the clock count argument from imx_register_uart_clocks() - Keep the uart clocks on i.MX93 for when earlycon is used - Fix SPDX comment in i.MX6SLL clocks bindings header - Drop some unnecessary spaces from i.MX8ULP clocks bindings header - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is not configured via devicetree - Fix the ENET1 gate configuration for i.MX6UL according to the reference manual - Add ENET refclock mux support for i.MX6UL - Add support for USB host/device configuration on Renesas RZ/N1 - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car V4H - Add D1 CAN bus gates and resets for Allwinner - Mark D1 CPUX clock as critical on Allwinner - Reuse D1 driver for Allwinner R528/T113 - Cleanup sunxi-ng Kconfig - Fix sunxi-ng kernel-doc issues - Model Allwinner H3/H5 DRAM clock as fixed clock - Use .determine_rate() instead of .round_rate() for the dualdiv, mpll, sclk-div and cpu-dyn-div amlogic clock drivers - DDR clocks were marked as critical in the proper clock driver for each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted in the next releases as it only does clock enablement - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some of them may use it - Support synchronous power_off requests in the qcom GDSC driver for proper GPU power collapse - Drop test clocks from various Qualcomm clk drivers - Update parent references to use clk_parent_data/clk_hw in various Qualcomm clk drivers - Fixes for the Qualcomm MSM8996 CPU clock controller - Transition Qualcomm MSM8974 GCC off the externally defined sleep_clk - Add GDSCs in the global clock controller for Qualcomm QCS404 - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and SDM845 are moved to use the recently introduced properties in the GDSC struct - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and the IPA clock is added on a variety of platforms - De-duplicate identical clks in Qualcomm SMD RPM clk driver - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404 to Qualcomm SDM RPM clk driver - Various Qualcomm clk drivers use devm_pm_runtime_enable() to simplify" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits) clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP clk: qcom: Revert sync_state based clk_disable_unused clk: imx: pll14xx: fix recalc_rate for negative kdiv clk: rs9: Drop unused pin_xin field MAINTAINERS: clk: imx: Add Peng Fan as reviewer clk: sprd: Add dependency for SPRD_UMS512_CLK clk: ralink: fix 'mt7621_gate_is_enabled()' function clk: mediatek: clk-mtk: Remove unneeded semicolon dt-bindings: clock: remove stih416 bindings dt-bindings: clock: add loongson-2 clock dt-bindings: clock: add loongson-2 clock include file clk: imx: fix compile testing imxrt1050 clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled() clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static clk: renesas: rcar-gen3: Disable R-Car H3 ES1.* dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property clk: qcom: cpu-8996: add missing cputype include ... 
Pull clk updates from Stephen Boyd:
 "We have one small patch to the clk core this time around. It fixes a
  corner case with the CLK_OPS_PARENT_ENABLE flag combined with
  clk_core_is_enabled() where it hangs the system. We'll simply assume
  the clk is disabled if the parent is disabled and the flag is set.
  Trying to turn on the parent to check the enable state of the clk runs
  into system hangs at boot. We let this bake in -next for a couple
  weeks to make sure there aren't any more issues because the last
  attempt to fix this ran into hangs and had to be reverted.

  Note: There were some more patches to the core framework around
  sync_state and disabling unused clks, but I asked for that to be
  reverted from the qcom PR because it isn't ready and we're still
  discussing the best solution on the list.

  Outside of the core clk framework, we have the usual collection of clk
  driver updates and support for new SoCs (which seems to never stop).
  The dirstat is dominated by Qualcomm because they added support for
  quite a few SoCs this time around and also migrated quite a few of
  their drivers to clk_parent_data. The other big diff is in the
  Mediatek clk drivers that saw a significant rework this cycle to
  similarly modernize the code, and we'll see that work continue in the
  next cycle as well. Nothing really jumps out as scary here, except
  that the significant churn in parent data descriptions can have typos
  that go unnoticed. More details below.

  Core:
   - Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()

  New Drivers:
   - Add a new clk-gpr-mux clock type and use it on i.MX6Q to add ENET
     ref clocks
   - Support for Mediatek MT7891 SoC clks
   - Support for many Qualcomm clk controllers:
      - QDU1000/QRU1000 global clock controller
      - SA8775P global clock controller
      - SM8550 TCSR and display clock controller
      - SM6350 clock controller
      - MSM8996 CBF and APCS clock controllers

  Updates:
   - Various cleanups and improvements to Mediatek clk drivers to reduce
     code size and modernize the drivers
   - Support for Versa 5P49V60 clks
   - Disable R-Car H3 ES1.*, as it was only available to an internal
     development group and needed a lot of quirks and workarounds
   - Add PWM, Compare-Match Timer (TIM), USB, SDHI, and eMMC clocks and
     resets on Renesas RZ/V2M
   - Add display clocks on Renesas R-Car V4H
   - Add Camera Receiving Unit (CRU) clocks and resets on Renesas RZ/G2L
   - Free the imx_uart_clocks even if imx_register_uart_clocks returns
     early
   - Get the stdout clocks count from device tree on i.MX
   - Drop the clock count argument from imx_register_uart_clocks()
   - Keep the uart clocks on i.MX93 for when earlycon is used
   - Fix SPDX comment in i.MX6SLL clocks bindings header
   - Drop some unnecessary spaces from i.MX8ULP clocks bindings header
   - Add imx_obtain_fixed_of_clock() for allowing to add a clock that is
     not configured via devicetree
   - Fix the ENET1 gate configuration for i.MX6UL according to the
     reference manual
   - Add ENET refclock mux support for i.MX6UL
   - Add support for USB host/device configuration on Renesas RZ/N1
   - Add PLL2 programming support, and CAN-FD clocks on Renesas R-Car
     V4H
   - Add D1 CAN bus gates and resets for Allwinner
   - Mark D1 CPUX clock as critical on Allwinner
   - Reuse D1 driver for Allwinner R528/T113
   - Cleanup sunxi-ng Kconfig
   - Fix sunxi-ng kernel-doc issues
   - Model Allwinner H3/H5 DRAM clock as fixed clock
   - Use .determine_rate() instead of .round_rate() for the dualdiv,
     mpll, sclk-div and cpu-dyn-div amlogic clock drivers
   - DDR clocks were marked as critical in the proper clock driver for
     each AT91 SoC such that drivers/memory/atmel-sdramc.c to be deleted
     in the next releases as it only does clock enablement
   - Patch to avoid compiling dt-compat.o for all AT91 SoCs as only some
     of them may use it
   - Support synchronous power_off requests in the qcom GDSC driver for
     proper GPU power collapse
   - Drop test clocks from various Qualcomm clk drivers
   - Update parent references to use clk_parent_data/clk_hw in various
     Qualcomm clk drivers
   - Fixes for the Qualcomm MSM8996 CPU clock controller
   - Transition Qualcomm MSM8974 GCC off the externally defined
     sleep_clk
   - Add GDSCs in the global clock controller for Qualcomm QCS404
   - The SDCC core clocks on Qualcomm SM6115 are moved to floor_ops
   - Programming of clk_dis_wait for GPU CX GDSC on Qualcomm SC7180 and
     SDM845 are moved to use the recently introduced properties in the
     GDSC struct
   - Qualcomm's RPMh clock driver gains SM8550 and SA8775P clocks, and
     the IPA clock is added on a variety of platforms
   - De-duplicate identical clks in Qualcomm SMD RPM clk driver
   - Add a few missing clocks across msm8998, msm8992, msm8916, qcs404
     to Qualcomm SDM RPM clk driver
   - Various Qualcomm clk drivers use devm_pm_runtime_enable() to
     simplify"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (228 commits)
  clk: qcom: apcs-msm8986: Include bitfield.h for FIELD_PREP
  clk: qcom: Revert sync_state based clk_disable_unused
  clk: imx: pll14xx: fix recalc_rate for negative kdiv
  clk: rs9: Drop unused pin_xin field
  MAINTAINERS: clk: imx: Add Peng Fan as reviewer
  clk: sprd: Add dependency for SPRD_UMS512_CLK
  clk: ralink: fix 'mt7621_gate_is_enabled()' function
  clk: mediatek: clk-mtk: Remove unneeded semicolon
  dt-bindings: clock: remove stih416 bindings
  dt-bindings: clock: add loongson-2 clock
  dt-bindings: clock: add loongson-2 clock include file
  clk: imx: fix compile testing imxrt1050
  clk: Honor CLK_OPS_PARENT_ENABLE in clk_core_is_enabled()
  clk: imx: set imx_clk_gpr_mux_ops storage-class-specifier to static
  clk: renesas: rcar-gen3: Disable R-Car H3 ES1.*
  dt-bindings: clock: Merge qcom,gpucc-sm8350 into qcom,gpucc.yaml
  clk: qcom: gpucc-sdm845: fix clk_dis_wait being programmed for CX GDSC
  clk: qcom: gpucc-sc7180: fix clk_dis_wait being programmed for CX GDSC
  dt-bindings: clock: qcom,sa8775p-gcc: add the power-domains property
  clk: qcom: cpu-8996: add missing cputype include
  ...
Merge tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into soc/drivers 2023-02-03T13:22:19+00:00 Arnd Bergmann arnd@arndb.de 2023-02-03T13:22:02+00:00 426082a214db267f44b3077c9e2cae9e1baaaa91 Introduce MediaTek regulator coupler driver to ensure that the SRAM voltage in par with the GPU voltage. This allows for a stable use of the GPU. mtk-mutex: - add support for MT8188 vdosys0 path - allow it to be build as module - add support for MT8195 vdosys1 path mmsys: - add MT8188 vdosys0 path - allow to be build as a module - add MT8195 vdosys1 path - add support for CMDQ - allow for up to 64 reset bits - add supprot for the MT8195 vppsys[0,1] pathes pm-domains: - keep power for the MT8186 ADSP on by default - add support for MT8188 - add support for buck isolation needed in specific pm-domains for MT8188 and MT8192 mtk-svs: - enable IRQ later to allow using kexec - several improvments on the code base - fix modalias pmic wrapper: - convert binding to yaml. As this is thightly coupled to the MT6357 PMIC, I took patches regarding it as well. * tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (41 commits) soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled() soc: mtk-svs: mt8183: refactor o_slope calculation soc: mediatek: mtk-svs: delete superfluous platform data entries soc: mediatek: mtk-svs: move svs_platform_probe into probe soc: mediatek: mtk-svs: improve readability of platform_probe soc: mediatek: mtk-svs: clean up platform probing soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() soc: mediatek: mtk-svs: reset svs when svs_resume() fail soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail soc: mediatek: mmsys: add support for MT8195 VPPSYS dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS soc: mediatek: Introduce mediatek-regulator-coupler driver soc: mediatek: mtk-svs: Enable the IRQ later soc: mediatek: add mtk-mutex support for mt8195 vdosys1 soc: mediatek: add mtk-mutex component - dp_intf1 soc: mediatek: mmsys: add reset control for MT8195 vdosys1 soc: mediatek: mmsys: add mmsys for support 64 reset bits soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1 ... Link: https://lore.kernel.org/r/396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
Introduce MediaTek regulator coupler driver to ensure that the SRAM
voltage in par with the GPU voltage. This allows for a stable use of the
GPU.

mtk-mutex:
- add support for MT8188 vdosys0 path
- allow it to be build as module
- add support for MT8195 vdosys1 path

mmsys:
- add MT8188 vdosys0 path
- allow to be build as a module
- add MT8195 vdosys1 path
- add support for CMDQ
- allow for up to 64 reset bits
- add supprot for the MT8195 vppsys[0,1] pathes

pm-domains:
- keep power for the MT8186 ADSP on by default
- add support for MT8188
- add support for buck isolation needed in specific pm-domains for
  MT8188 and MT8192

mtk-svs:
- enable IRQ later to allow using kexec
- several improvments on the code base
- fix modalias

pmic wrapper:
- convert binding to yaml. As this is thightly coupled to the MT6357
  PMIC, I took patches regarding it as well.

* tag 'v6.2-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (41 commits)
  soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE
  soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled()
  soc: mtk-svs: mt8183: refactor o_slope calculation
  soc: mediatek: mtk-svs: delete superfluous platform data entries
  soc: mediatek: mtk-svs: move svs_platform_probe into probe
  soc: mediatek: mtk-svs: improve readability of platform_probe
  soc: mediatek: mtk-svs: clean up platform probing
  soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported
  soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01()
  soc: mediatek: mtk-svs: reset svs when svs_resume() fail
  soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail
  soc: mediatek: mmsys: add support for MT8195 VPPSYS
  dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS
  soc: mediatek: Introduce mediatek-regulator-coupler driver
  soc: mediatek: mtk-svs: Enable the IRQ later
  soc: mediatek: add mtk-mutex support for mt8195 vdosys1
  soc: mediatek: add mtk-mutex component - dp_intf1
  soc: mediatek: mmsys: add reset control for MT8195 vdosys1
  soc: mediatek: mmsys: add mmsys for support 64 reset bits
  soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1
  ...

Link: https://lore.kernel.org/r/396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: reset: mt8195: add vdosys1 reset control bit 2023-01-25T15:05:14+00:00 Nancy.Lin nancy.lin@mediatek.com 2023-01-13T10:44:25+00:00 664a39b8e7693482f07dddcf986797d54f2427f7 Add vdosys1 reset control bit for MT8195 platform. Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230113104434.28023-3-nancy.lin@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> 
Add vdosys1 reset control bit for MT8195 platform.

Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230113104434.28023-3-nancy.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
dt-bindings: clock: Add D1 CAN bus gates and resets 2023-01-08T21:06:10+00:00 Samuel Holland samuel@sholland.org 2022-12-31T23:14:28+00:00 925b61ba2dafa9c13c9afa9b83a45d499cd73f2f The D1 CCU contains gates and resets for two CAN buses. While the CAN bus controllers are only documented for the T113 SoC, the CCU is the same across all SoC variants. Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> 
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
dt-bindings: reset: meson-g12a: Add missing NNA reset 2023-01-02T10:29:38+00:00 Tomeu Vizoso tomeu.vizoso@collabora.com 2022-12-02T11:52:13+00:00 a439267609f9d57b15991c55550956d7cc5404d8 Doesn't appear in the TRM I have, but it is used by the downstream galcore driver. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20221202115223.39051-2-tomeu.vizoso@collabora.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> 
Doesn't appear in the TRM I have, but it is used by the downstream
galcore driver.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221202115223.39051-2-tomeu.vizoso@collabora.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog 2022-12-17T14:34:01+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-17T14:34:01+00:00 b611996ef270a88ebb350c82832c4d76913887e9 Pull watchdog updates from Wim Van Sebroeck: - Add Advantech EC watchdog driver - Add support for MT6795 Helio X10 watchdog and toprgu - Add support for MT8188 watchdog device - Remove #ifdef guards for PM related functions - Other fixes and improvements * tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: aspeed: Enable pre-timeout interrupt watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running watchdog: rn5t618: add support for read out bootstatus watchdog: kempld: Remove #ifdef guards for PM related functions watchdog: omap: Remove #ifdef guards for PM related functions watchdog: twl4030: Remove #ifdef guards for PM related functions watchdog: at91rm9200: Remove #ifdef guards for PM related functions watchdog: Add Advantech EC watchdog driver dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173 dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795 dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema watchdog: mediatek: mt8188: add wdt support dt-bindings: reset: mt8188: add toprgu reset-controller header file dt-bindings: watchdog: Add compatible for MediaTek MT8188 watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu 
Pull watchdog updates from Wim Van Sebroeck:

 - Add Advantech EC watchdog driver

 - Add support for MT6795 Helio X10 watchdog and toprgu

 - Add support for MT8188 watchdog device

 - Remove #ifdef guards for PM related functions

 - Other fixes and improvements

* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: aspeed: Enable pre-timeout interrupt
  watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
  watchdog: rn5t618: add support for read out bootstatus
  watchdog: kempld: Remove #ifdef guards for PM related functions
  watchdog: omap: Remove #ifdef guards for PM related functions
  watchdog: twl4030: Remove #ifdef guards for PM related functions
  watchdog: at91rm9200: Remove #ifdef guards for PM related functions
  watchdog: Add Advantech EC watchdog driver
  dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
  dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
  dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
  watchdog: mediatek: mt8188: add wdt support
  dt-bindings: reset: mt8188: add toprgu reset-controller header file
  dt-bindings: watchdog: Add compatible for MediaTek MT8188
  watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux 2022-12-13T21:46:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-12-13T21:46:07+00:00 0015edd6f66172f93aa720192020138ca13ba0a6 Pull clk driver updates from Stephen Boyd: "A pile of clk driver updates with a small tracepoint patch to the clk core this time around. The core framework is effectively unchanged, with the majority of the diff going to the Qualcomm clk driver directory because they added two 3k line files that are almost all clk data (Abel Vesa from Linaro tried to shrink the number of lines down, but it doesn't seem to be possible without sacrificing readability). The second big driver this time around is the Rockchip rk3588 clk and reset unit, at _only_ 2.5k lines. Ignoring the big clk drivers from the familiar SoC vendors, there's just a bunch of little clk driver updates and fixes throughout here. It's the usual set of clk data fixups to describe proper parents, or add frequencies to frequency tables, or plug memory leaks when function calls fail. Also, some drivers are converted to use modern clk_hw APIs, which is always nice to see. And data is deduplicated, leading to a smaller kernel Image. Overall this batch has a larger collection of cleanups than it typically does. Maybe that means there are less new SoCs right now that need supporting, and the focus has shifted to quality and reliability. I can dream. New Drivers: - Frequency hopping controller hardware on MediaTek MT8186 - Global clock controller for Qualcomm SM8550 - Display clock controller for Qualcomm SC8280XP - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs - CPU PLL on MStar/SigmaStar SoCs - Support for the clock and reset unit of the Rockchip rk3588 Updates: - Tracepoints for clk_rate_request structures - Debugfs support for fractional divider clk - Make MxL's CGU driver secure compatible - Ingenic JZ4755 SoC clk support - Support audio clks on X1000 SoCs - Remove flags from univ/main/syspll child fixed factor clocks across MediaTek platforms - Fix clock dependency for ADC on MediaTek MT7986 - Fix parent for FlexSPI clock for i.MX93 - Add USB suspend clock on i.MX8MP - Unmap anatop base on error for i.MX93 driver - Change enet clock parent to wakeup_axi_root for i.MX93 - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93 - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93 - Add 320MHz and 640MHz entries to PLL146x - Add audio shared gate and SAI clocks for i.MX8MP - Fix a possible memory leak in the error path of rockchip PLL creation - Fix header guard for V3S clocks - Add IR module clock for f1c100s - Correct the parent clocks for the (High Speed) Serial Communication Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet Switch clocks on Renesas R-Car S4-8 - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas R-Car V4H - Two PLL driver fixups for the Amlogic clk driver - Round SD clock rate to improve parent clock selection - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car S4-8 - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX) serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI (RPC-IF) clocks on Renesas R-Car V4H - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on Renesas RZ/G2L - Fix endless loop on Renesas RZ/N1 - Correct the parent clocks for the High Speed Serial Communication Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC Note: HSCIF0 is used for the serial console on the White-Hawk development board - Various clk DT binding improvements and conversions to YAML - Qualcomm SM8150/SM8250 display clock controller cleaned up - Some missing clocks for Qualcomm SM8350 added - Qualcomm MSM8974 Global and Multimedia clock controllers transitioned to parent_data and parent_hws - Use parent_data and add network resets for Qualcomm IPQ8074 - Qualcomm Krait clock controller modernized - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock controllers - Enable retention mode on Qualcomm SM8250 USB GDSCs - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating clocks which definition could be shared between platforms - Various NULL pointer checks added for allocations" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits) clk: nomadik: correct struct name kernel-doc warning clk: lmk04832: fix kernel-doc warnings clk: lmk04832: drop superfluous #include clk: lmk04832: drop unnecessary semicolons clk: lmk04832: declare variables as const when possible clk: socfpga: Fix memory leak in socfpga_gate_init() clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE clk: st: Fix memory leak in st_of_quadfs_setup() clk: samsung: Fix memory leak in _samsung_clk_register_pll() clk: Add trace events for rate requests clk: Store clk_core for clk_rate_request clk: qcom: rpmh: add support for SM6350 rpmh IPA clock clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: mmcc-msm8974: move clock parent tables down clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names clk: qcom: gcc-msm8974: move clock parent tables down clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974 dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file ... 
Pull clk driver updates from Stephen Boyd:
 "A pile of clk driver updates with a small tracepoint patch to the clk
  core this time around.

  The core framework is effectively unchanged, with the majority of the
  diff going to the Qualcomm clk driver directory because they added two
  3k line files that are almost all clk data (Abel Vesa from Linaro
  tried to shrink the number of lines down, but it doesn't seem to be
  possible without sacrificing readability).

  The second big driver this time around is the Rockchip rk3588 clk and
  reset unit, at _only_ 2.5k lines.

  Ignoring the big clk drivers from the familiar SoC vendors, there's
  just a bunch of little clk driver updates and fixes throughout here.

  It's the usual set of clk data fixups to describe proper parents, or
  add frequencies to frequency tables, or plug memory leaks when
  function calls fail. Also, some drivers are converted to use modern
  clk_hw APIs, which is always nice to see. And data is deduplicated,
  leading to a smaller kernel Image.

  Overall this batch has a larger collection of cleanups than it
  typically does. Maybe that means there are less new SoCs right now
  that need supporting, and the focus has shifted to quality and
  reliability. I can dream.

  New Drivers:
   - Frequency hopping controller hardware on MediaTek MT8186
   - Global clock controller for Qualcomm SM8550
   - Display clock controller for Qualcomm SC8280XP
   - RPMh clock controller for Qualcomm QDU1000 and QRU1000 SoCs
   - CPU PLL on MStar/SigmaStar SoCs
   - Support for the clock and reset unit of the Rockchip rk3588

  Updates:
   - Tracepoints for clk_rate_request structures
   - Debugfs support for fractional divider clk
   - Make MxL's CGU driver secure compatible
   - Ingenic JZ4755 SoC clk support
   - Support audio clks on X1000 SoCs
   - Remove flags from univ/main/syspll child fixed factor clocks across
     MediaTek platforms
   - Fix clock dependency for ADC on MediaTek MT7986
   - Fix parent for FlexSPI clock for i.MX93
   - Add USB suspend clock on i.MX8MP
   - Unmap anatop base on error for i.MX93 driver
   - Change enet clock parent to wakeup_axi_root for i.MX93
   - Drop LPIT1, LPIT2, TPM1 and TPM3 clocks for i.MX93
   - Mark HSIO bus clock and SYS_CNT clock as critical on i.MX93
   - Add 320MHz and 640MHz entries to PLL146x
   - Add audio shared gate and SAI clocks for i.MX8MP
   - Fix a possible memory leak in the error path of rockchip PLL
     creation
   - Fix header guard for V3S clocks
   - Add IR module clock for f1c100s
   - Correct the parent clocks for the (High Speed) Serial Communication
     Interfaces with FIFO ((H)SCIF) modules and the mixed-up Ethernet
     Switch clocks on Renesas R-Car S4-8
   - Add timer (TMU, CMT) and Cortex-A76 CPU core (Z0) clocks on Renesas
     R-Car V4H
   - Two PLL driver fixups for the Amlogic clk driver
   - Round SD clock rate to improve parent clock selection
   - Add Ethernet Switch and internal SASYNCPER clocks on Renesas R-Car
     S4-8
   - Add DMA (SYS-DMAC), SPI (MSIOF), external interrupt (INTC-EX)
     serial (SCIF), PWM (PWM and TPU), SDHI, and HyperFLASH/QSPI
     (RPC-IF) clocks on Renesas R-Car V4H
   - Add Multi-Function Timer Pulse Unit (MTU3a) clock and reset on
     Renesas RZ/G2L
   - Fix endless loop on Renesas RZ/N1
   - Correct the parent clocks for the High Speed Serial Communication
     Interfaces with FIFO (HSCIF) modules on the Renesas R-Car V4H SoC
     Note: HSCIF0 is used for the serial console on the White-Hawk
     development board
   - Various clk DT binding improvements and conversions to YAML
   - Qualcomm SM8150/SM8250 display clock controller cleaned up
   - Some missing clocks for Qualcomm SM8350 added
   - Qualcomm MSM8974 Global and Multimedia clock controllers
     transitioned to parent_data and parent_hws
   - Use parent_data and add network resets for Qualcomm IPQ8074
   - Qualcomm Krait clock controller modernized
   - Fix pm_runtime usage in Qualcomm SC7180 and SC7280 LPASS clock
     controllers
   - Enable retention mode on Qualcomm SM8250 USB GDSCs
   - Cleanup Qualcomm RPM and RPMh clock drivers to avoid duplicating
     clocks which definition could be shared between platforms
   - Various NULL pointer checks added for allocations"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (188 commits)
  clk: nomadik: correct struct name kernel-doc warning
  clk: lmk04832: fix kernel-doc warnings
  clk: lmk04832: drop superfluous #include
  clk: lmk04832: drop unnecessary semicolons
  clk: lmk04832: declare variables as const when possible
  clk: socfpga: Fix memory leak in socfpga_gate_init()
  clk: microchip: enable the MPFS clk driver by default if SOC_MICROCHIP_POLARFIRE
  clk: st: Fix memory leak in st_of_quadfs_setup()
  clk: samsung: Fix memory leak in _samsung_clk_register_pll()
  clk: Add trace events for rate requests
  clk: Store clk_core for clk_rate_request
  clk: qcom: rpmh: add support for SM6350 rpmh IPA clock
  clk: qcom: mmcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: mmcc-msm8974: move clock parent tables down
  clk: qcom: mmcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  clk: qcom: gcc-msm8974: use parent_hws/_data instead of parent_names
  clk: qcom: gcc-msm8974: move clock parent tables down
  clk: qcom: gcc-msm8974: use ARRAY_SIZE instead of specifying num_parents
  dt-bindings: clocks: qcom,mmcc: define clocks/clock-names for MSM8974
  dt-bindings: clock: split qcom,gcc-msm8974,-msm8226 to the separate file
  ...
dt-bindings: tegra: Update headers for Tegra234 2022-11-21T12:27:17+00:00 Jon Hunter jonathanh@nvidia.com 2022-10-03T12:51:41+00:00 41155b6f6db8742c5f5247a141eca89c601c258c Update the device-tree clock, memory, power and reset headers for Tegra234 by adding the definitions for all the various devices. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Update the device-tree clock, memory, power and reset headers for
Tegra234 by adding the definitions for all the various devices.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
dt-bindings: reset: mt8188: add toprgu reset-controller header file 2022-11-19T14:30:35+00:00 Runyang Chen runyang.chen@mediatek.com 2022-10-26T06:33:26+00:00 fea58041af4c1a8ac2e8b461a772599e205d0d1f Add toprgu reset-controller header file for MT8188 Signed-off-by: Runyang Chen <runyang.chen@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221026063327.20037-3-Runyang.Chen@mediatek.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> 
Add toprgu reset-controller header file for MT8188

Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221026063327.20037-3-Runyang.Chen@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>