Commit f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled
by CCOSR") introduced the CLK_CLKO definitions, but didn't put them
at the end of the list, which may cause dtb breakage when running an old
dtb with a newer kernel.
In order to avoid that, simply add the new CLK_CKO clock definitions
at the end of the list.
Fixes: f5a4670de966 ("clk: imx: Add new clo01 and clo2 controlled by CCOSR")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* clk-davinci-psc-da830: clk: davinci: psc-da830: fix USB0 48MHz PHY clock registration * clk-renesas: clk: renesas: cpg-mssr: Add support for R-Car E3 clk: renesas: Add r8a77990 CPG Core Clock Definitions clk: renesas: rcar-gen2: Centralize quirks handling clk: renesas: r8a77980: Correct parent clock of PCIEC0 clk: renesas: r8a7794: Fix LB clock divider clk: renesas: r8a7792: Fix LB clock divider clk: renesas: r8a7791/r8a7793: Fix LB clock divider clk: renesas: r8a7745: Fix LB clock divider clk: renesas: r8a7743: Fix LB clock divider clk: renesas: cpg-mssr: Add r8a77470 support clk: renesas: Add r8a77470 CPG Core Clock Definitions clk: renesas: r8a77965: Add MSIOF controller clocks * clk-at91-recalc: clk: at91: PLL recalc_rate() now using cached MUL and DIV values * clk-davinci: clk: davinci: Fix link errors when not all SoCs are enabled clk: davinci: psc: allow for dev == NULL clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE clk: davinci: pll: allow dev == NULL clk: davinci: psc-dm365: fix few clocks clk: davinci: pll-dm646x: keep PLL2 SYSCLK1 always enabled clk: davinci: psc-dm355: fix ASP0/1 clkdev lookups clk: davinci: pll-dm355: fix SYSCLKn parent names clk: davinci: pll-dm355: drop pll2_sysclk2 * clk-meson: clk: meson: axg: let mpll clocks round closest clk: meson: mpll: add round closest support clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL clk: meson: use SPDX license identifiers consistently clk: meson: drop CLK_SET_RATE_PARENT flag clk: meson-axg: Add AO Clock and Reset controller driver clk: meson: aoclk: refactor common code into dedicated file clk: meson: migrate to devm_of_clk_add_hw_provider API clk: meson: gxbb: add the video decoder clocks clk: meson: meson8b: add support for the NAND clocks dt-bindings: clock: reset: Add AXG AO Clock and Reset Bindings dt-bindings: clock: axg-aoclkc: New binding for Meson-AXG SoC clk: meson: gxbb: expose VDEC_1 and VDEC_HEVC clocks dt-bindings: clock: meson8b: export the NAND clock
* clk-qcom-sdm845: clk: qcom: Export clk_fabia_pll_configure() clk: qcom: Add video clock controller driver for SDM845 dt-bindings: clock: Introduce QCOM Video clock bindings clk: qcom: Add Global Clock controller (GCC) driver for SDM845 clk: qcom: Add DT bindings for SDM845 gcc clock controller clk: qcom: Configure the RCGs to a safe source as needed clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks clk: qcom: Simplify gdsc status checking logic clk: qcom: gdsc: Add support to poll CFG register to check GDSC state clk: qcom: gdsc: Add support to poll for higher timeout value clk: qcom: gdsc: Add support to reset AON and block reset logic clk: qcom: Add support for controlling Fabia PLL clk: qcom: Clear hardware clock control bit of RCG Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the description and also the video Kconfig says things slightly differently from the GCC one so just make it the same.
* clk-match-string: clk: use match_string() helper clk: bcm2835: use match_string() helper * clk-ingenic: clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted * clk-si544-round-fix: clk-si544: Properly round requested frequency to nearest match * clk-bcm-stingray: clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc
* clk-imx7d: clk: imx7d: reset parent for mipi csi root clk: imx7d: fix mipi dphy div parent * clk-hisi-stub: clk/driver/hisi: Consolidate the Kconfig for the CLOCK_STUB * clk-mvebu: clk: mvebu: use correct bit for 98DX3236 NAND * clk-imx6-epit: clk: imx6: add EPIT clock support * clk-debugfs-simple: clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions
* clk-imx6sx: clk: imx6sl: correct ocram_podf clock type clk: imx6sx: disable unnecessary clocks during clock initialization clk: imx6sx: add missing lvds2 clock to the clock tree * clk-imx7d-enet: ARM: dts: imx7: correct enet ipg clock clk: imx7d: correct enet clock CCGR registers clk: imx7d: correct enet phy ref clock gates * clk-aspeed-24: clk: aspeed: Add 24MHz fixed clock
* clk-allwinner: clk: sunxi-ng: r40: export a regmap to access the GMAC register clk: sunxi-ng: r40: rewrite init code to a platform driver clk: sunxi-ng: add support for H6 PRCM CCU * clk-rockchip: clk: rockchip: remove deprecated gate-clk code and dt-binding clk: rockchip: use match_string() helper * clk-tegra: clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20 clk: tegra20: Correct parents of CDEV1/2 clocks clk: tegra20: Add DEV1/DEV2 OSC dividers * clk-berlin: clk: berlin: switch to SPDX license identifier * clk-qcom-mmagic: clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled clk: qcom: Register the gdscs before the clocks clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
* clk-hisi-usb: clk: hisilicon: add missing usb3 clocks for Hi3798CV200 SoC * clk-silent-bulk: clk: bulk: silently error out on EPROBE_DEFER * clk-mtk-hdmi: clk: mediatek: correct the clocks for MT2701 HDMI PHY module * clk-mtk-mali: clk: mediatek: add g3dsys support for MT2701 and MT7623 dt-bindings: reset: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add entry for Mali-450 node to refer dt-bindings: clock: mediatek: add g3dsys bindings * clk-imx6ul-ccosr: clk: imx: Add new clo01 and clo2 controlled by CCOSR
* clk-stm32mp1: clk: stm32mp1: Fix a memory leak in 'clk_stm32_register_gate_ops()' clk: stm32mp1: Add CLK_IGNORE_UNUSED to ck_sys_dbg clock clk: stm32mp1: remove ck_apb_dbg clock clk: stm32mp1: set stgen_k clock as critical clk: stm32mp1: add missing tzc2 clock clk: stm32mp1: fix SAI3 & SAI4 clocks clk: stm32mp1: remove unused dfsdm_src[] const clk: stm32mp1: add missing static * clk-samsung: clk: samsung: simplify getting .drvdata * clk-uniphier-mpeg: clk: uniphier: add LD11/LD20 stream demux system clock * clk-stratix10: clk: socfpga: stratix10: suppress unbinding platform's clock driver clk: socfpga: stratix10: use platform driver APIs * clk-aspeed: clk:aspeed: Fix reset bits for PCI/VGA and PECI clk: aspeed: Support second reset register
* clk-qcom-rpmh: dt-bindings: clock: Introduce QCOM RPMh clock bindings * clk-npcm7xx: clk: npcm7xx: fix return value check in npcm7xx_clk_init() clk: npcm7xx: add clock controller dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock * clk-of-parent-count: pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding clk: Extract OF clock helpers in <linux/of_clk.h> * clk-qcom-rcg-fix: clk: qcom: Base rcg parent rate off plan frequency