linux-stable.git/include/drm/drm_atomic.h, branch linux-5.4.y Linux kernel stable tree drm/atomic: clarify the rules around drm_atomic_state->allow_modeset 2025-06-04T12:32:34+00:00 Simona Vetter simona.vetter@ffwll.ch 2025-01-08T17:24:16+00:00 70589698329364e9fdbcab3551b24702517bd409 [ Upstream commit c5e3306a424b52e38ad2c28c7f3399fcd03e383d ] msm is automagically upgrading normal commits to full modesets, and that's a big no-no: - for one this results in full on->off->on transitions on all these crtc, at least if you're using the usual helpers. Which seems to be the case, and is breaking uapi - further even if the ctm change itself would not result in flicker, this can hide modesets for other reasons. Which again breaks the uapi v2: I forgot the case of adding unrelated crtc state. Add that case and link to the existing kerneldoc explainers. This has come up in an irc discussion with Manasi and Ville about intel's bigjoiner mode. Also cc everyone involved in the msm irc discussion, more people joined after I sent out v1. v3: Wording polish from Pekka and Thomas Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Simon Ser <contact@emersion.fr> Cc: Manasi Navare <navaremanasi@google.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Simona Vetter <simona.vetter@intel.com> Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20250108172417.160831-1-simona.vetter@ffwll.ch Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit c5e3306a424b52e38ad2c28c7f3399fcd03e383d ]

msm is automagically upgrading normal commits to full modesets, and
that's a big no-no:

- for one this results in full on->off->on transitions on all these
  crtc, at least if you're using the usual helpers. Which seems to be
  the case, and is breaking uapi

- further even if the ctm change itself would not result in flicker,
  this can hide modesets for other reasons. Which again breaks the
  uapi

v2: I forgot the case of adding unrelated crtc state. Add that case
and link to the existing kerneldoc explainers. This has come up in an
irc discussion with Manasi and Ville about intel's bigjoiner mode.
Also cc everyone involved in the msm irc discussion, more people
joined after I sent out v1.

v3: Wording polish from Pekka and Thomas

Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Simon Ser <contact@emersion.fr>
Cc: Manasi Navare <navaremanasi@google.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Simona Vetter <simona.vetter@intel.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250108172417.160831-1-simona.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
drm: Add helpers to kick off self refresh mode in drivers 2019-06-13T18:31:10+00:00 Sean Paul seanpaul@chromium.org 2019-06-12T14:50:19+00:00 1452c25b0e60278820f3d2155c65f1bfcce5ee79 This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run 
This patch adds a new drm helper library to help drivers implement
self refresh. Drivers choosing to use it will register crtcs and
will receive callbacks when it's time to enter or exit self refresh
mode.

In its current form, it has a timer which will trigger after a
driver-specified amount of inactivity. When the timer triggers, the
helpers will submit a new atomic commit to shut the refreshing pipe
off. On the next atomic commit, the drm core will revert the self
refresh state and bring everything back up to be actively driven.

From the driver's perspective, this works like a regular disable/enable
cycle. The driver need only check the 'self_refresh_active' state in
crtc_state. It should initiate self refresh mode on the panel and enter
an off or low-power state.

Changes in v2:
- s/psr/self_refresh/ (Daniel)
- integrated the psr exit into the commit that wakes it up (Jose/Daniel)
- made the psr state per-crtc (Jose/Daniel)
Changes in v3:
- Remove the self_refresh_(active|changed) from connector state (Daniel)
- Simplify loop in drm_self_refresh_helper_alter_state (Daniel)
- Improve self_refresh_aware comment (Daniel)
- s/self_refresh_state/self_refresh_data/ (Daniel)
Changes in v4:
- Move docbook location below panel (Daniel)
- Improve docbook with references and more detailed explanation (Daniel)
- Instead of register/unregister, use init/cleanup (Daniel)
Changes in v5:
- Resolved conflict in drm_atomic_helper.c #include block
- Resolved conflict in rst with HDCP helper docs
Changes in v6:
- Fix include ordering, clean up forward declarations (Sam)

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers 2019-06-13T17:00:29+00:00 Laurent Pinchart laurent.pinchart@ideasonboard.com 2019-06-11T20:51:43+00:00 1b27fbdde1df172dba604855c45078d741f8c858 Add functions to the atomic core to retrieve the old and new connectors associated with an encoder in a drm_atomic_state. This is useful for encoders and bridges that need to access the connector, for instance for the drm_display_info. The CRTC associated with the encoder can also be retrieved through the connector state, and from it, the old and new CRTC states. Changed in v4: - Added to the set Changed in v5: - Fix up docbook (Daniel & Laurent) Changed in v6: - Updated commit subject (Sam) Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [seanpaul removed WARNs from helpers and added docs to explain why returning NULL might be valid] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run 
Add functions to the atomic core to retrieve the old and new connectors
associated with an encoder in a drm_atomic_state. This is useful for
encoders and bridges that need to access the connector, for instance for
the drm_display_info.

The CRTC associated with the encoder can also be retrieved through the
connector state, and from it, the old and new CRTC states.

Changed in v4:
- Added to the set
Changed in v5:
- Fix up docbook (Daniel & Laurent)
Changed in v6:
- Updated commit subject (Sam)

Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run
Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[seanpaul removed WARNs from helpers and added docs to explain why
returning NULL might be valid]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run
drm: Add drm_atomic_get_old/new_private_obj_state 2019-04-29T11:35:56+00:00 james qian wang (Arm Technology China) james.qian.wang@arm.com 2019-01-22T11:05:41+00:00 9801a7eadf4cc29cdc90583a49f12decbb832ced This pair of functions return the old/new private object state for the given private_obj, or NULL if the private_obj is not part of the global atomic state. Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com> 
This pair of functions return the old/new private object state for the
given private_obj, or NULL if the private_obj is not part of the global
atomic state.

Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Signed-off-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
drm/atomic: Add drm_atomic_state->duplicated 2019-02-05T23:19:00+00:00 Lyude Paul lyude@redhat.com 2019-02-02T00:20:03+00:00 022debad063e4d3fb456218273821c010757f6f7 Since commit 39b50c603878 ("drm/atomic_helper: Stop modesets on unregistered connectors harder") We've been failing atomic checks if they try to enable new displays on unregistered connectors. This is fine except for the one situation that breaks atomic assumptions: suspend/resume. If a connector is unregistered before we attempt to restore the atomic state, something we end up failing the atomic check that happens when trying to restore the state during resume. Normally this would be OK: we try our best to make sure that the atomic state pre-suspend can be restored post-suspend, but failures at that point usually don't cause problems. That is of course, until we introduced the new atomic MST VCPI helpers: [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5] [drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea RSP: 0018:ffff88841235f268 EFLAGS: 00010246 RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0 RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92 R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80 R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000 FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper] ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper] ? __printk_safe_exit+0x10/0x10 ? save_stack+0x8c/0xb0 ? vprintk_func+0x96/0x1bf ? __printk_safe_exit+0x10/0x10 intel_atomic_check+0x234/0x4750 [i915] ? printk+0x9f/0xc5 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? _raw_spin_lock_irqsave+0xa4/0x140 ? drm_atomic_check_only+0xb1/0x28b0 [drm] ? drm_dbg+0x186/0x1b0 [drm] ? drm_dev_dbg+0x200/0x200 [drm] ? intel_link_compute_m_n+0xb0/0xb0 [i915] ? drm_mode_put_tile_group+0x20/0x20 [drm] ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915] ? drm_plane_check_pixel_format+0x14a/0x310 [drm] drm_atomic_check_only+0x13c4/0x28b0 [drm] ? drm_state_info+0x220/0x220 [drm] ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper] ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper] ? kasan_unpoison_shadow+0x35/0x40 drm_atomic_commit+0x3b/0x100 [drm] drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper] drm_mode_setcrtc+0x636/0x1660 [drm] ? vprintk_func+0x96/0x1bf ? drm_dev_dbg+0x200/0x200 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? printk+0x9f/0xc5 ? mutex_unlock+0x1d/0x40 ? drm_mode_addfb2+0x2e9/0x3a0 [drm] ? rcu_sync_dtor+0x2e0/0x2e0 ? drm_dbg+0x186/0x1b0 [drm] ? set_page_dirty+0x271/0x4d0 drm_ioctl_kernel+0x203/0x290 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_setversion+0x7f0/0x7f0 [drm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 drm_ioctl+0x445/0x950 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_getunique+0x220/0x220 [drm] ? expand_files.part.10+0x920/0x920 do_vfs_ioctl+0x1a1/0x13d0 ? ioctl_preallocate+0x2b0/0x2b0 ? __fget_light+0x2d6/0x390 ? schedule+0xd7/0x2e0 ? fget_raw+0x10/0x10 ? apic_timer_interrupt+0xa/0x20 ? apic_timer_interrupt+0xa/0x20 ? rcu_cleanup_dead_rnp+0x2c0/0x2c0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x136/0x440 ? syscall_return_slowpath+0x2d0/0x2d0 ? do_page_fault+0x89/0x330 ? __do_page_fault+0x9c0/0x9c0 ? prepare_exit_to_usermode+0x188/0x200 ? perf_trace_sys_enter+0x1090/0x1090 ? __x64_sys_sigaltstack+0x280/0x280 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f16ff89a09b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460 R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] ---[ end trace d536c05c13c83be2 ]--- [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a This appears to be happening because we destroy the VCPI allocations when disabling all connected displays while suspending, and those VCPI allocations don't get restored on resume due to failing to restore the atomic state. So, fix this by introducing the suspending option to drm_atomic_helper_duplicate_state() and use that to indicate in the atomic state that it's being used for suspending or resuming the system, and thus needs to be fixed up by the driver. We can then use the new state->duplicated hook to tell update_connector_routing() in drm_atomic_check_modeset() to allow for modesets on unregistered connectors, which allows us to restore atomic states that contain MST topologies that were removed after the state was duplicated and thus: mostly fixing suspend and resume. This just leaves some issues that were introduced with nouveau, that will be addressed next. Changes since v3: * Remove ->duplicated hunks that I left in the VCPI helpers by accident. These don't need to be here, that was the supposed to be the purpose of the last revision Changes since v2: * Remove the changes in this patch to the VCPI helpers, they aren't needed anymore Changes since v1: * Rename suspend_or_resume to duplicated Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations") Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com 
Since

commit 39b50c603878 ("drm/atomic_helper: Stop modesets on unregistered
connectors harder")

We've been failing atomic checks if they try to enable new displays on
unregistered connectors. This is fine except for the one situation that
breaks atomic assumptions: suspend/resume. If a connector is
unregistered before we attempt to restore the atomic state, something we
end up failing the atomic check that happens when trying to restore the
state during resume.

Normally this would be OK: we try our best to make sure that the atomic
state pre-suspend can be restored post-suspend, but failures at that
point usually don't cause problems. That is of course, until we
introduced the new atomic MST VCPI helpers:

[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5]
[drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5]
[drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd
CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G        W  O      5.0.0-rc2Lyude-Test+ #1
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea
RSP: 0018:ffff88841235f268 EFLAGS: 00010246
RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557
RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0
RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92
R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80
R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000
FS:  00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper]
 ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper]
 ? __printk_safe_exit+0x10/0x10
 ? save_stack+0x8c/0xb0
 ? vprintk_func+0x96/0x1bf
 ? __printk_safe_exit+0x10/0x10
 intel_atomic_check+0x234/0x4750 [i915]
 ? printk+0x9f/0xc5
 ? kmsg_dump_rewind_nolock+0xd9/0xd9
 ? _raw_spin_lock_irqsave+0xa4/0x140
 ? drm_atomic_check_only+0xb1/0x28b0 [drm]
 ? drm_dbg+0x186/0x1b0 [drm]
 ? drm_dev_dbg+0x200/0x200 [drm]
 ? intel_link_compute_m_n+0xb0/0xb0 [i915]
 ? drm_mode_put_tile_group+0x20/0x20 [drm]
 ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915]
 ? drm_plane_check_pixel_format+0x14a/0x310 [drm]
 drm_atomic_check_only+0x13c4/0x28b0 [drm]
 ? drm_state_info+0x220/0x220 [drm]
 ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper]
 ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper]
 ? kasan_unpoison_shadow+0x35/0x40
 drm_atomic_commit+0x3b/0x100 [drm]
 drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper]
 drm_mode_setcrtc+0x636/0x1660 [drm]
 ? vprintk_func+0x96/0x1bf
 ? drm_dev_dbg+0x200/0x200 [drm]
 ? drm_mode_getcrtc+0x790/0x790 [drm]
 ? printk+0x9f/0xc5
 ? mutex_unlock+0x1d/0x40
 ? drm_mode_addfb2+0x2e9/0x3a0 [drm]
 ? rcu_sync_dtor+0x2e0/0x2e0
 ? drm_dbg+0x186/0x1b0 [drm]
 ? set_page_dirty+0x271/0x4d0
 drm_ioctl_kernel+0x203/0x290 [drm]
 ? drm_mode_getcrtc+0x790/0x790 [drm]
 ? drm_setversion+0x7f0/0x7f0 [drm]
 ? __switch_to_asm+0x34/0x70
 ? __switch_to_asm+0x34/0x70
 drm_ioctl+0x445/0x950 [drm]
 ? drm_mode_getcrtc+0x790/0x790 [drm]
 ? drm_getunique+0x220/0x220 [drm]
 ? expand_files.part.10+0x920/0x920
 do_vfs_ioctl+0x1a1/0x13d0
 ? ioctl_preallocate+0x2b0/0x2b0
 ? __fget_light+0x2d6/0x390
 ? schedule+0xd7/0x2e0
 ? fget_raw+0x10/0x10
 ? apic_timer_interrupt+0xa/0x20
 ? apic_timer_interrupt+0xa/0x20
 ? rcu_cleanup_dead_rnp+0x2c0/0x2c0
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x6f/0xb0
 do_syscall_64+0x136/0x440
 ? syscall_return_slowpath+0x2d0/0x2d0
 ? do_page_fault+0x89/0x330
 ? __do_page_fault+0x9c0/0x9c0
 ? prepare_exit_to_usermode+0x188/0x200
 ? perf_trace_sys_enter+0x1090/0x1090
 ? __x64_sys_sigaltstack+0x280/0x280
 ? __put_user_4+0x1c/0x30
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f16ff89a09b
Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b
RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460
R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770
WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper]
---[ end trace d536c05c13c83be2 ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a

This appears to be happening because we destroy the VCPI allocations
when disabling all connected displays while suspending, and those VCPI
allocations don't get restored on resume due to failing to restore the
atomic state.

So, fix this by introducing the suspending option to
drm_atomic_helper_duplicate_state() and use that to indicate in the
atomic state that it's being used for suspending or resuming the system,
and thus needs to be fixed up by the driver. We can then use the new
state->duplicated hook to tell update_connector_routing() in
drm_atomic_check_modeset() to allow for modesets on unregistered
connectors, which allows us to restore atomic states that contain MST
topologies that were removed after the state was duplicated and thus:
mostly fixing suspend and resume. This just leaves some issues that were
introduced with nouveau, that will be addressed next.

Changes since v3:
* Remove ->duplicated hunks that I left in the VCPI helpers by accident.
  These don't need to be here, that was the supposed to be the purpose
  of the last revision
Changes since v2:
* Remove the changes in this patch to the VCPI helpers, they aren't
  needed anymore
Changes since v1:
* Rename suspend_or_resume to duplicated

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: eceae1472467 ("drm/dp_mst: Start tracking per-port VCPI allocations")
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
drm: Trivial comment grammar cleanups 2019-02-04T09:21:17+00:00 Matt Roper matthew.d.roper@intel.com 2019-02-02T01:23:26+00:00 1e55a53a28d3e52a68e11917dd25a216c3e7c182 Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com 
Most of these are just cases where code comments used contractions
(it's, who's) where they actually mean to use a possessive pronoun (its,
whose) or vice-versa.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
drm/atomic: Add missing () to function ref in kerneldoc 2019-01-11T15:13:12+00:00 Daniel Vetter daniel.vetter@ffwll.ch 2018-10-12T07:34:41+00:00 7d0250ed8e69fb6a66caecf60b8753a21224cc1a Pure drive-by while reading code&docs. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012073441.21774-1-daniel.vetter@ffwll.ch 
Pure drive-by while reading code&docs.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012073441.21774-1-daniel.vetter@ffwll.ch
drm/atomic: integrate modeset lock with private objects 2018-12-11T14:24:30+00:00 Rob Clark robdclark@gmail.com 2018-10-22T12:31:22+00:00 b962a12050a387e4bbf3a48745afe1d29d396b0d Follow the same pattern of locking as with other state objects. This avoids boilerplate in the driver. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181022123122.30468-1-boris.brezillon@bootlin.com 
Follow the same pattern of locking as with other state objects. This
avoids boilerplate in the driver.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181022123122.30468-1-boris.brezillon@bootlin.com
Merge remote-tracking branch 'drm/drm-next' into drm-misc-next 2018-11-13T09:59:10+00:00 Maarten Lankhorst maarten.lankhorst@linux.intel.com 2018-11-13T09:58:49+00:00 0ea0397a3a12f9720d6acb78a48da796a54e81aa drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> 
drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Merge tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm 2018-10-29T00:49:53+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-10-29T00:49:53+00:00 53b3b6bbfde6aae8d1ededc86ad4e0e1e00eb5f8 Pull drm updates from Dave Airlie: "This is going to rebuild more than drm as it adds a new helper to list.h for doing bulk updates. Seemed like a reasonable addition to me. Otherwise the usual merge window stuff lots of i915 and amdgpu, not so much nouveau, and piles of everything else. Core: - Adds a new list.h helper for doing bulk list updates for TTM. - Don't leak fb address in smem_start to userspace (comes with EXPORT workaround for people using mali out of tree hacks) - udmabuf device to turn memfd regions into dma-buf - Per-plane blend mode property - ref/unref replacements with get/put - fbdev conflicting framebuffers code cleaned up - host-endian format variants - panel orientation quirk for Acer One 10 bridge: - TI SN65DSI86 chip support vkms: - GEM support. - Cursor support amdgpu: - Merge amdkfd and amdgpu into one module - CEC over DP AUX support - Picasso APU support + VCN dynamic powergating - Raven2 APU support - Vega20 enablement + kfd support - ACP powergating improvements - ABGR/XBGR display support - VCN jpeg support - xGMI support - DC i2c/aux cleanup - Ycbcr 4:2:0 support - GPUVM improvements - Powerplay and powerplay endian fixes - Display underflow fixes vmwgfx: - Move vmwgfx specific TTM code to vmwgfx - Split out vmwgfx buffer/resource validation code - Atomic operation rework bochs: - use more helpers - format/byteorder improvements qxl: - use more helpers i915: - GGTT coherency getparam - Turn off resource streamer API - More Icelake enablement + DMC firmware - Full PPGTT for Ivybridge, Haswell and Valleyview - DDB distribution based on resolution - Limited range DP display support nouveau: - CEC over DP AUX support - Initial HDMI 2.0 support virtio-gpu: - vmap support for PRIME objects tegra: - Initial Tegra194 support - DMA/IOMMU integration fixes msm: - a6xx perf improvements + clock prefix - GPU preemption optimisations - a6xx devfreq support - cursor support rockchip: - PX30 support - rgb output interface support mediatek: - HDMI output support on mt2701 and mt7623 rcar-du: - Interlaced modes on Gen3 - LVDS on R8A77980 - D3 and E3 SoC support hisilicon: - misc fixes mxsfb: - runtime pm support sun4i: - R40 TCON support - Allwinner A64 support - R40 HDMI support omapdrm: - Driver rework changing display pipeline ordering to use common code - DMM memory barrier and irq fixes - Errata workarounds exynos: - out-bridge support for LVDS bridge driver - Samsung 16x16 tiled format support - Plane alpha and pixel blend mode support tilcdc: - suspend/resume update mali-dp: - misc updates" * tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits) firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake. drm/i915/icl: Fix signal_levels drm/i915/icl: Fix DDI/TC port clk_off bits drm/i915/icl: create function to identify combophy port drm/i915/gen9+: Fix initial readout for Y tiled framebuffers drm/i915: Large page offsets for pread/pwrite drm/i915/selftests: Disable shrinker across mmap-exhaustion drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode drm/i915: Fix intel_dp_mst_best_encoder() drm/i915: Skip vcpi allocation for MSTB ports that are gone drm/i915: Don't unset intel_connector->mst_port drm/i915: Only reset seqno if actually idle drm/i915: Use the correct crtc when sanitizing plane mapping drm/i915: Restore vblank interrupts earlier drm/i915: Check fb stride against plane max stride drm/amdgpu/vcn:Fix uninitialized symbol error drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003) drm/amd/amdgpu: Fix debugfs error handling drm/amdgpu: Update gc_9_0 golden settings. drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields ... 
Pull drm updates from Dave Airlie:
 "This is going to rebuild more than drm as it adds a new helper to
  list.h for doing bulk updates. Seemed like a reasonable addition to
  me.

  Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
  much nouveau, and piles of everything else.

  Core:
   - Adds a new list.h helper for doing bulk list updates for TTM.
   - Don't leak fb address in smem_start to userspace (comes with EXPORT
     workaround for people using mali out of tree hacks)
   - udmabuf device to turn memfd regions into dma-buf
   - Per-plane blend mode property
   - ref/unref replacements with get/put
   - fbdev conflicting framebuffers code cleaned up
   - host-endian format variants
   - panel orientation quirk for Acer One 10

  bridge:
   - TI SN65DSI86 chip support

  vkms:
   - GEM support.
   - Cursor support

  amdgpu:
   - Merge amdkfd and amdgpu into one module
   - CEC over DP AUX support
   - Picasso APU support + VCN dynamic powergating
   - Raven2 APU support
   - Vega20 enablement + kfd support
   - ACP powergating improvements
   - ABGR/XBGR display support
   - VCN jpeg support
   - xGMI support
   - DC i2c/aux cleanup
   - Ycbcr 4:2:0 support
   - GPUVM improvements
   - Powerplay and powerplay endian fixes
   - Display underflow fixes

  vmwgfx:
   - Move vmwgfx specific TTM code to vmwgfx
   - Split out vmwgfx buffer/resource validation code
   - Atomic operation rework

  bochs:
   - use more helpers
   - format/byteorder improvements

  qxl:
   - use more helpers

  i915:
   - GGTT coherency getparam
   - Turn off resource streamer API
   - More Icelake enablement + DMC firmware
   - Full PPGTT for Ivybridge, Haswell and Valleyview
   - DDB distribution based on resolution
   - Limited range DP display support

  nouveau:
   - CEC over DP AUX support
   - Initial HDMI 2.0 support

  virtio-gpu:
   - vmap support for PRIME objects

  tegra:
   - Initial Tegra194 support
   - DMA/IOMMU integration fixes

  msm:
   - a6xx perf improvements + clock prefix
   - GPU preemption optimisations
   - a6xx devfreq support
   - cursor support

  rockchip:
   - PX30 support
   - rgb output interface support

  mediatek:
   - HDMI output support on mt2701 and mt7623

  rcar-du:
   - Interlaced modes on Gen3
   - LVDS on R8A77980
   - D3 and E3 SoC support

  hisilicon:
   - misc fixes

  mxsfb:
   - runtime pm support

  sun4i:
   - R40 TCON support
   - Allwinner A64 support
   - R40 HDMI support

  omapdrm:
   - Driver rework changing display pipeline ordering to use common code
   - DMM memory barrier and irq fixes
   - Errata workarounds

  exynos:
   - out-bridge support for LVDS bridge driver
   - Samsung 16x16 tiled format support
   - Plane alpha and pixel blend mode support

  tilcdc:
   - suspend/resume update

  mali-dp:
   - misc updates"

* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
  firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
  drm/i915/icl: Fix signal_levels
  drm/i915/icl: Fix DDI/TC port clk_off bits
  drm/i915/icl: create function to identify combophy port
  drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
  drm/i915: Large page offsets for pread/pwrite
  drm/i915/selftests: Disable shrinker across mmap-exhaustion
  drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
  drm/i915: Fix intel_dp_mst_best_encoder()
  drm/i915: Skip vcpi allocation for MSTB ports that are gone
  drm/i915: Don't unset intel_connector->mst_port
  drm/i915: Only reset seqno if actually idle
  drm/i915: Use the correct crtc when sanitizing plane mapping
  drm/i915: Restore vblank interrupts earlier
  drm/i915: Check fb stride against plane max stride
  drm/amdgpu/vcn:Fix uninitialized symbol error
  drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
  drm/amd/amdgpu: Fix debugfs error handling
  drm/amdgpu: Update gc_9_0 golden settings.
  drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
  ...