commit c2b47df81c8e20a8e8cd94f0d7df211137ae94ed upstream.
[BUG]
With CONFIG_DEBUG_VM set, test case generic/476 has some chance to crash
with the following VM_BUG_ON_FOLIO():
BTRFS error (device dm-3): cow_file_range failed, start 1146880 end 1253375 len 106496 ret -28
BTRFS error (device dm-3): run_delalloc_nocow failed, start 1146880 end 1253375 len 106496 ret -28
page: refcount:4 mapcount:0 mapping:00000000592787cc index:0x12 pfn:0x10664
aops:btrfs_aops [btrfs] ino:101 dentry name(?):"f1774"
flags: 0x2fffff80004028(uptodate|lru|private|node=0|zone=2|lastcpupid=0xfffff)
page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio))
------------[ cut here ]------------
kernel BUG at mm/page-writeback.c:2992!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 2 UID: 0 PID: 3943513 Comm: kworker/u24:15 Tainted: G OE 6.12.0-rc7-custom+ #87
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : folio_clear_dirty_for_io+0x128/0x258
lr : folio_clear_dirty_for_io+0x128/0x258
Call trace:
folio_clear_dirty_for_io+0x128/0x258
btrfs_folio_clamp_clear_dirty+0x80/0xd0 [btrfs]
__process_folios_contig+0x154/0x268 [btrfs]
extent_clear_unlock_delalloc+0x5c/0x80 [btrfs]
run_delalloc_nocow+0x5f8/0x760 [btrfs]
btrfs_run_delalloc_range+0xa8/0x220 [btrfs]
writepage_delalloc+0x230/0x4c8 [btrfs]
extent_writepage+0xb8/0x358 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x150 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x88/0xc8
start_delalloc_inodes+0x178/0x3a8 [btrfs]
btrfs_start_delalloc_roots+0x174/0x280 [btrfs]
shrink_delalloc+0x114/0x280 [btrfs]
flush_space+0x250/0x2f8 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x164/0x408
worker_thread+0x25c/0x388
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: 910a8021 a90363f7 a9046bf9 94012379 (d4210000)
---[ end trace 0000000000000000 ]---
[CAUSE]
The first two lines of extra debug messages show the problem is caused
by the error handling of run_delalloc_nocow().
E.g. we have the following dirtied range (4K blocksize 4K page size):
0 16K 32K
|//////////////////////////////////////|
| Pre-allocated |
And the range [0, 16K) has a preallocated extent.
- Enter run_delalloc_nocow() for range [0, 16K)
Which found range [0, 16K) is preallocated, can do the proper NOCOW
write.
- Enter fallback_to_fow() for range [16K, 32K)
Since the range [16K, 32K) is not backed by preallocated extent, we
have to go COW.
- cow_file_range() failed for range [16K, 32K)
So cow_file_range() will do the clean up by clearing folio dirty,
unlock the folios.
Now the folios in range [16K, 32K) is unlocked.
- Enter extent_clear_unlock_delalloc() from run_delalloc_nocow()
Which is called with PAGE_START_WRITEBACK to start page writeback.
But folios can only be marked writeback when it's properly locked,
thus this triggered the VM_BUG_ON_FOLIO().
Furthermore there is another hidden but common bug that
run_delalloc_nocow() is not clearing the folio dirty flags in its error
handling path.
This is the common bug shared between run_delalloc_nocow() and
cow_file_range().
[FIX]
- Clear folio dirty for range [@start, @cur_offset)
Introduce a helper, cleanup_dirty_folios(), which
will find and lock the folio in the range, clear the dirty flag and
start/end the writeback, with the extra handling for the
@locked_folio.
- Introduce a helper to clear folio dirty, start and end writeback
- Introduce a helper to record the last failed COW range end
This is to trace which range we should skip, to avoid double
unlocking.
- Skip the failed COW range for the error handling
CC: stable@vger.kernel.org
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06f364284794f149d2abc167c11d556cf20c954b upstream. [BUG] When testing with COW fixup marked as BUG_ON() (this is involved with the new pin_user_pages*() change, which should not result new out-of-band dirty pages), I hit a crash triggered by the BUG_ON() from hitting COW fixup path. This BUG_ON() happens just after a failed btrfs_run_delalloc_range(): BTRFS error (device dm-2): failed to run delalloc range, root 348 ino 405 folio 65536 submit_bitmap 6-15 start 90112 len 106496: -28 ------------[ cut here ]------------ kernel BUG at fs/btrfs/extent_io.c:1444! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 0 UID: 0 PID: 434621 Comm: kworker/u24:8 Tainted: G OE 6.12.0-rc7-custom+ #86 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : extent_writepage_io+0x2d4/0x308 [btrfs] lr : extent_writepage_io+0x2d4/0x308 [btrfs] Call trace: extent_writepage_io+0x2d4/0x308 [btrfs] extent_writepage+0x218/0x330 [btrfs] extent_write_cache_pages+0x1d4/0x4b0 [btrfs] btrfs_writepages+0x94/0x150 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x88/0xc8 start_delalloc_inodes+0x180/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x174/0x280 [btrfs] shrink_delalloc+0x114/0x280 [btrfs] flush_space+0x250/0x2f8 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x164/0x408 worker_thread+0x25c/0x388 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: aa1403e1 9402f3ef aa1403e0 9402f36f (d4210000) ---[ end trace 0000000000000000 ]--- [CAUSE] That failure is mostly from cow_file_range(), where we can hit -ENOSPC. Although the -ENOSPC is already a bug related to our space reservation code, let's just focus on the error handling. For example, we have the following dirty range [0, 64K) of an inode, with 4K sector size and 4K page size: 0 16K 32K 48K 64K |///////////////////////////////////////| |#######################################| Where |///| means page are still dirty, and |###| means the extent io tree has EXTENT_DELALLOC flag. - Enter extent_writepage() for page 0 - Enter btrfs_run_delalloc_range() for range [0, 64K) - Enter cow_file_range() for range [0, 64K) - Function btrfs_reserve_extent() only reserved one 16K extent So we created extent map and ordered extent for range [0, 16K) 0 16K 32K 48K 64K |////////|//////////////////////////////| |<- OE ->|##############################| And range [0, 16K) has its delalloc flag cleared. But since we haven't yet submit any bio, involved 4 pages are still dirty. - Function btrfs_reserve_extent() returns with -ENOSPC Now we have to run error cleanup, which will clear all EXTENT_DELALLOC* flags and clear the dirty flags for the remaining ranges: 0 16K 32K 48K 64K |////////| | | | | Note that range [0, 16K) still has its pages dirty. - Some time later, writeback is triggered again for the range [0, 16K) since the page range still has dirty flags. - btrfs_run_delalloc_range() will do nothing because there is no EXTENT_DELALLOC flag. - extent_writepage_io() finds page 0 has no ordered flag Which falls into the COW fixup path, triggering the BUG_ON(). Unfortunately this error handling bug dates back to the introduction of btrfs. Thankfully with the abuse of COW fixup, at least it won't crash the kernel. [FIX] Instead of immediately unlocking the extent and folios, we keep the extent and folios locked until either erroring out or the whole delalloc range finished. When the whole delalloc range finished without error, we just unlock the whole range with PAGE_SET_ORDERED (and PAGE_UNLOCK for !keep_locked cases), with EXTENT_DELALLOC and EXTENT_LOCKED cleared. And the involved folios will be properly submitted, with their dirty flags cleared during submission. For the error path, it will be a little more complex: - The range with ordered extent allocated (range (1)) We only clear the EXTENT_DELALLOC and EXTENT_LOCKED, as the remaining flags are cleaned up by btrfs_mark_ordered_io_finished()->btrfs_finish_one_ordered(). For folios we finish the IO (clear dirty, start writeback and immediately finish the writeback) and unlock the folios. - The range with reserved extent but no ordered extent (range(2)) - The range we never touched (range(3)) For both range (2) and range(3) the behavior is not changed. Now even if cow_file_range() failed halfway with some successfully reserved extents/ordered extents, we will keep all folios clean, so there will be no future writeback triggered on them. CC: stable@vger.kernel.org Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0f038104fa37380e2a725e669508e43d0c503e9 upstream. There is a recent ML report that mounting a large fs backed by hardware RAID56 controller (with one device missing) took too much time, and systemd seems to kill the mount attempt. In that case, the only error message is: BTRFS error (device sdj): open_ctree failed There is no reason on why the failure happened, making it very hard to understand the reason. At least output the error number (in the particular case it should be -EINTR) to provide some clue. Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/ Reported-by: Christoph Anton Mitterer <calestyo@scientia.org> Cc: stable@vger.kernel.org Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4ed93037966aea07ae6b10ab208976783d24e2e upstream.
If the filesystem has an external log device on pmem and the pmem
reports a media error beyond the end of the log area, don't shut down
the filesystem because we don't use that space.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: 6f643c57d57c56 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aacd3fac248902ea1f7607f2d12b93929a4833b upstream.
Lai Yi reported a lockdep complaint about circular locking:
Chain exists of:
&lp->qli_lock --> &bch->bc_lock --> &l->lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&l->lock);
lock(&bch->bc_lock);
lock(&l->lock);
lock(&lp->qli_lock);
I /think/ the problem here is that xfs_dquot_attach_buf during
quotacheck will release the buffer while it's holding the qli_lock.
Because this is a cached buffer, xfs_buf_rele_cached takes b_lock before
decrementing b_hold. Other threads have taught lockdep that a locking
dependency chain is bp->b_lock -> bch->bc_lock -> l(ru)->lock; and that
another chain is l(ru)->lock -> lp->qli_lock. Hence we do not want to
take b_lock while holding qli_lock.
Reported-by: syzbot+3126ab3db03db42e7a31@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> # v6.13-rc3
Fixes: ca378189fdfa89 ("xfs: convert quotacheck to attach dquot buffers")
Tested-by: syzbot+3126ab3db03db42e7a31@syzkaller.appspotmail.com
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b8d867ca6e2fc6d152f629fdaf027053b81765a upstream.
Emmanual Florac reports a strange occurrence when project quota limits
are enabled, free space is lower than the remaining quota, and someone
runs statvfs:
# mkfs.xfs -f /dev/sda
# mount /dev/sda /mnt -o prjquota
# xfs_quota -x -c 'limit -p bhard=2G 55' /mnt
# mkdir /mnt/dir
# xfs_io -c 'chproj 55' -c 'chattr +P' -c 'stat -vvvv' /mnt/dir
# fallocate -l 19g /mnt/a
# df /mnt /mnt/dir
Filesystem Size Used Avail Use% Mounted on
/dev/sda 20G 20G 345M 99% /mnt
/dev/sda 2.0G 0 2.0G 0% /mnt
I think the bug here is that xfs_fill_statvfs_from_dquot unconditionally
assigns to f_bfree without checking that the filesystem has enough free
space to fill the remaining project quota. However, this is a
longstanding behavior of xfs so it's unclear what to do here.
Cc: <stable@vger.kernel.org> # v2.6.18
Fixes: 932f2c323196c2 ("[XFS] statvfs component of directory/project quota support, code originally by Glen.")
Reported-by: Emmanuel Florac <eflorac@intellique.com>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit efebe42d95fbba91dca6e3e32cb9e0612eb56de5 upstream.
When mounting an image containing a log with sb modifications that require
log replay, the mount process hang all the time and stack as follows:
[root@localhost ~]# cat /proc/557/stack
[<0>] xfs_buftarg_wait+0x31/0x70
[<0>] xfs_buftarg_drain+0x54/0x350
[<0>] xfs_mountfs+0x66e/0xe80
[<0>] xfs_fs_fill_super+0x7f1/0xec0
[<0>] get_tree_bdev_flags+0x186/0x280
[<0>] get_tree_bdev+0x18/0x30
[<0>] xfs_fs_get_tree+0x1d/0x30
[<0>] vfs_get_tree+0x2d/0x110
[<0>] path_mount+0xb59/0xfc0
[<0>] do_mount+0x92/0xc0
[<0>] __x64_sys_mount+0xc2/0x160
[<0>] x64_sys_call+0x2de4/0x45c0
[<0>] do_syscall_64+0xa7/0x240
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
During log recovery, while updating the in-memory superblock from the
primary SB buffer, if an error is encountered, such as superblock
corruption occurs or some other reasons, we will proceed to out_release
and release the xfs_buf. However, this is insufficient because the
xfs_buf's log item has already been initialized and the xfs_buf is held
by the buffer log item as follows, the xfs_buf will not be released,
causing the mount thread to hang.
xlog_recover_do_primary_sb_buffer
xlog_recover_do_reg_buffer
xlog_recover_validate_buf_type
xfs_buf_item_init(bp, mp)
The solution is straightforward, we simply need to allow it to be
handled by the normal buffer write process. The filesystem will be
shutdown before the submission of buffer_list in xlog_do_recovery_pass(),
ensuring the correct release of the xfs_buf as follows:
xlog_do_recovery_pass
error = xlog_recover_process
xlog_recover_process_data
xlog_recover_process_ophdr
xlog_recovery_process_trans
...
xlog_recover_buf_commit_pass2
error = xlog_recover_do_primary_sb_buffer
//Encounter error and return
if (error)
goto out_writebuf
...
out_writebuf:
xfs_buf_delwri_queue(bp, buffer_list) //add bp to list
return error
...
if (!list_empty(&buffer_list))
if (error)
xlog_force_shutdown(log, SHUTDOWN_LOG_IO_ERROR); //shutdown first
xfs_buf_delwri_submit(&buffer_list); //submit buffers in list
__xfs_buf_submit
if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log))
xfs_buf_ioend_fail(bp) //release bp correctly
Fixes: 6a18765b54e2 ("xfs: update the file system geometry after recoverying superblock buffers")
Cc: stable@vger.kernel.org # v6.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07eae0fa67ca4bbb199ad85645e0f9dfaef931cd upstream.
Commit 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting
new buffers") converted xfs_buf_find_insert to use
rhashtable_lookup_get_insert_fast and thus an operation that returns the
existing buffer when an insert would duplicate the hash key. But this
code path misses the check for a buffer with a reference count of zero,
which could lead to reusing an about to be freed buffer. Fix this by
using the same atomic_inc_not_zero pattern as xfs_buf_insert.
Fixes: 32dd4f9c506b ("xfs: remove a superflous hash lookup when inserting new buffers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Cc: stable@vger.kernel.org # v6.0
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91b587ba79e1b68bb718d12b0758dbcdab4e9cb7 upstream.
This patch addresses an issue where some files in case-insensitive
directories become inaccessible due to changes in how the kernel function,
utf8_casefold(), generates case-folded strings from the commit 5c26d2f1d3f5
("unicode: Don't special case ignorable code points").
F2FS uses these case-folded names to calculate hash values for locating
dentries and stores them on disk. Since utf8_casefold() can produce
different output across kernel versions, stored hash values and newly
calculated hash values may differ. This results in affected files no
longer being found via the hash-based lookup.
To resolve this, the patch introduces a linear search fallback.
If the initial hash-based search fails, F2FS will sequentially scan the
directory entries.
Fixes: 5c26d2f1d3f5 ("unicode: Don't special case ignorable code points")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219586
Signed-off-by: Daniel Lee <chullee@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Daniel Rosenberg <drosen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8b19dfb34d17e77a0809d433cc128b779282131b ]
SMB1 callback get_cifs_acl_by_fid() currently ignores its last argument and
therefore ignores request for SACL_SECINFO. Fix this issue by correctly
propagating info argument from get_cifs_acl() and get_cifs_acl_by_fid() to
CIFSSMBGetCIFSACL() function and pass SACL_SECINFO when requested.
For accessing SACLs it is needed to open object with SYSTEM_SECURITY
access. Pass this flag when trying to get or set SACLs.
Same logic is in the SMB2+ code path.
This change fixes getting and setting of "system.cifs_ntsd_full" and
"system.smb3_ntsd_full" xattrs over SMB1 as currently it silentely ignored
SACL part of passed xattr buffer.
Fixes: 3970acf7ddb9 ("SMB3: Add support for getting and setting SACLs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>